Shop
HeatBoard ONE MAX – 2400x600mm – all in one 22mm Grooved Chipboard Panel
£36.90 Excluding VATEasy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
Accreditations:
- Chipboard to BS EN 312 / Type P5
Minimum Order: 15 Boards
Click Here For: PRODUCT DATA SHEET
ThermRite™ Routed Dry Screed Overlay Board with Turns
£24.60 Excluding VATLow Profile, High Strength, Grooved Cement Boards to enable tiling directly on top, incorporating turns on the board – no need for additional turning boards
Universal’ design with “lightbulb” turns at the end of the panels and 3x cross runs machined into the top of panel for easy routing of the flow and return pipes.
4 grooves at 150mm centres for 12mm Pipe
Tongue and Groove interlocking glued joints – No screws required
Specification:
- Board Height: 18mm
- Board Size: 1200 x 600mm
- Grooves: 4 @ 150mm Centres for 12mm pipe
- Board Coverage: 0.72m²
Features:
- No need for seperate turning panels
- Very low thermal resistance (0.045m /kW)
- High thermal conductivity (0.40W/mK)
- Low thermal expansion
- Only 18mm thick
- Doesn’t contract or expand like chipboard when exposed to water
- High impact resistance
- Tongue & groove edge detail – no screws required
- Quick and easy to install
- Accepts ceramic tiles
Minimum Order: 10 Boards (7.2m²)
Heatmiser Slimline-B V3 Battery Powered Programmable Thermostat
£35.65 Excluding VATA Battery Powered Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system
Our Slimline-B V3 battery thermostat offers a viable upgrade route for those with a dial thermostat working on a two wire system.
Click Here For: Slimline-B Product Manual
Wireless Thermostat – Heatmiser Slimline-RF V3
£34.75 Excluding VATA wireless solution to control your underfloor heating
The Heatmiser Slimline-RF V3 wireless thermostat works with the Heatmiser RF Switch & UH8-RF Wireless Wiring Centre.
The wireless thermostat is designed to be wall mounted in the area being controlled, up to 100 meters open space from the receiver.
Click Here For: Slimline-RF Product Manual
Heatmiser Slimline V4 – Digital Programmable Thermostat
£38.50 Excluding VATA Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system
The Heatmiser Slimline V4 is a 230volt powered programmable thermostat and is a room thermostat and programmer in one, providing up to 4 different temperatures at different times of the day.
The Slimline V4 Thermostat is the ideal upgrade route for those with an existing mains powered thermostat and can be set to work as a non programmable, 5/2 day or 7 day programmable.
Click for: Product Installation & Data Sheet
Click Here For: PRODUCT MANUAL
Priority CAD Design Service
£35.00 Excluding VATA bespoke CAD layout designed from your plans
Ideal service for those wanting to have the system designed by us & altered to best suit your requirements before ordering.
When you order your system we refund this cost in full.
Features:
- See your design before ordering your system
- Cost is deducted from the price of your system when ordering
Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3
£38.95 Excluding VATThe Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind
The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat.
A 3M remote floor sensor is provided.
NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.
Click Here For: Slimline-E V3 Product Manual
PROFLEX S2: Fibre Reinforced Flexible Tile Adhesive – GREY
£23.95 Excluding VATRapid setting fibre reinforced tile adhesive – the ideal solution for bonding down our ThermRite™ PRO Panels (EPS) & for tiling onto both our ThermRite™ PRO & Solid Floor Insulation panels.
UltraTileFix ProFlex S2 is a single part, rapid setting, flexible, fibre reinforced adhesive for wall and floor tiles. It is specially formulated with FibreBond technology, enhanced adhesion and flexibility, making it ideal for areas where movement or vibration can occur.
Specification:
- Ideal for use with all tile types including brick slips, resin backed and quartz
- Formulated with FibreBond technology
• Ultimate S2 flexibility for timber floors including plywood and chipboard overlays, swimming pools and underfloor heating systems - 3-20mm bed thickness
- 60 minutes pot life
- 3.5 hours set time
- 20kg : 4.0L mixing ratio
- Conforms to C2F S2 EN 12004 and 12002 classification
- Size: 20kg
- Colours: Grey
- Lifetime guarantee
Coverage: 3mm Adhesive bed: 1 Bag = 4.4m²
Minimum Order: 10 Bags
Click Here For: PRODUCT DATA SHEET
3/4″ to 1/2″ Brass Manifold with Ball Valves – 4 Port
£20.48 Excluding VAT4 Port Manifold ideal for connection of all hot and cold services in Bathrooms & Utility Rooms
- 3/4″ manifold with 1/2″ ports
- Valves allow each circuit to be isolated
- High quality brass construction
- Nickel Plated
- Safe and fast installation.
- WRAS certified. (UK Certified for use with drinking water installations)
Pack quantity: 1 Manifold
Manifold can be simply jointed together to make the required number of ports. Order connector cores separately for connetion to our Pex-Al-Pex multi-layer pipe.
This product has been granted WRAS approval enabling it to be used in all domestic plumbing applications including drinking water (potable water) installations – as well as central heating and underfloor heating applications.
Heatmiser Dial Thermostat with LCD DS1-L V2
£25.17 Excluding VATA Dial Type Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS1 is our 230v, electronic room thermostat incorporating an LCD. In normal operation, the actual room temperature is displayed on the LCD, rotating the dial will display the set temperature for 5 seconds.
Click Here For: DS1-L Product Manual
2 Port Motorised Valve
£34.50 Excluding VATHigh specification flow control. Simple connection to our floor heating systems.
2 Port Valve Features:– 22mm
– De-mountable actuator (power head)
– Replaceable motor
– Wedge type actuator
– Spring return operation
– Manual lever for flushing or filling the system
– Integral auxillary switch (to enable starting up of boiler)
– Industry standard wiring
ThermRite™ Routed Dry Screed Overlay Boards (Tongue & Groove) with Straight Runs (no turns)
£26.71 Excluding VATLow Profile, High Strength, Grooved Cement Boards to enable tiling directly on top.
Tongue and Groove interlocking glued joints – No screws required
Specification:
- Board Height: 18mm
- Board Size: 1200 x 600mm
- Grooves: 4 @ 150mm Centres for 12mm pipe
- Board Coverage: 0.72m²
Features:
- Very low thermal resistance (0.045m /kW)
- High thermal conductivity (0.40W/mK)
- Low thermal expansion
- Only 18mm thick
- Doesn’t contract or expand like chipboard when exposed to water
- High impact resistance
- Tongue & groove edge detail – no screws required
- Quick and easy to install
- Accepts ceramic tiles
Minimum Order: 10 Boards (7.2m²)
Two Channel Wireless Receiver – Heatmiser RF Switch V2
£28.60 Excluding VATWireless 2 Channel Receiver
The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler.
In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.
Click for: Product Installation & Data Sheet
Heatmiser Set Back Thermostat DS-SB-V3
£26.85 Excluding VATA Dial Type Set Back Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS-SB features a set back function, a function that will automatically reduce the set temperature by 4C when no time clock signal is detected therefore providing more flexible control of your heating.
Click Here For: DS-SB Product Manual
16amp Wireless Electric Heating Receiver – RF Switch 16A
£31.50 Excluding VATWireless 16amp Receiver
The RF-Switch 16A is our surface mount wireless receiver for electric heating. It is capable of switching up to 16A.
Please note this is not designed for electric floor heating as there is no floor limiting sensor function.
The RF Switch is compatible with the Slimline-RF and neoAir.
HeatBoard ONE PLUS – 1200x600mm – Easy Lay – all in one 22mm Foiled & Grooved Chipboard Panel – High Heat Output
£22.50 Excluding VATHigh Output – Easy Lay Foiled Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 1200mm, Height: 22mm
- Board Coverage: 0.72m²
- Weight: 10 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
Accreditations:
- Chipboard to BS EN 312 / Type P5
Minimum Order: 20 Boards
Click Here For: PRODUCT DATA SHEET
Heatmiser Edge – Multi Mode Programmable Room Thermostat
£35.95 Excluding VATA Digital Programmable Room Thermostat that can be combined with wireless sensors for optimum control
Heatmiser edge offers a great upgrade route for those with an existing dial thermostat or for those looking to measure the temperature remote from the thermostat.
The wireless air sensor function is perfect for those looking to measure the temperature in another location and for those with larger open plan properties, multiple air sensors can be used to create an average temperature.
Click Here For: Heatmiser EDGE Product Manual
Joint Adhesive for Dry Screed Overlay Cement Boards for underfloor heating
£20.18 Excluding VATFor Use With Our Dry Screed Overlay Cement Boards
Specification:
- 1.0 Litre tube
- Coverage: 33.0m²
Heatmiser neoPlug – Smart Plug
£39.95 Excluding VATExpand your Neo System with neoPlug and control your Appliances from Anywhere!
With the Heatmiser neoPlug you can control the appliance manually from the neoApp or you can program switching times via the app that the appliance will follow.
With the latest apps for Android, Windows 10 and iOS, users can include the neoPlug in their Geo Location triggers, so the appliance can turn on when you get close to home or when you leave.