Low Profile, High Strength, Grooved Cement Boards to enable tiling directly on top, incorporating turns on the board – no need for additional turning boards
At only 18mm thick, and designed for use with our 12mm pipe, these cement boards are ideally suited to a low profile design that requires tiling on top.
Universal’ design with “lightbulb” turns at the end of the panels and 3x cross runs machined into the top of panel for easy routing of the flow and return pipes.
4 grooves at 150mm centres for 12mm Pipe
Tongue and Groove interlocking glued joints – No screws required.
Our High density overlay floor boards are ideally suited for underfloor heating and feature a tongue and groove edge detail (no screws) and benefit from high impact resistance. These boards increase the efficiency of an under floor heating board system due to their low thermal resistance and rapid heat transfer characteristics.
Our screed boards enable underfloor heating, boilers, ground water heat pumps and heat recovery systems to work at maximum efficiency and deliver comfortable, controllable heat to the occupant quicker than traditional floor finishes.
Joint Adhesive must be used on all joints (Available seperately)
- Board Height: 18mm
- Board Size: 1200 x 600mm
- Board Coverage: 0.72m²
- Very low thermal resistance (0.045m /kW)
- High thermal conductivity (0.40W/mK)
- Low thermal expansion
- Only 18mm thick
- Doesn’t contract or expand like chipboard when exposed to water
- High impact resistance
- Tongue & groove edge detail – no screws required
- Quick and easy to install
- Accepts ceramic tiles
NOTE: These are Flat Cement Boards with no pipe grooves.
Minimum Order: 10 Boards (7.2m²)