Networked control of your floor heating system.12 Volt Network products allow total control of your home heating system. An optional centrally located touchpad, allows simple programming of the entire system.The available Netmonitor allows you to take control of your home heating system over the internet from any web browser – no additional software is required on your PC.Configuration is also available to control the system remotely via telephone.

Close

Heatmiser neoStat 12v V2 – Programmable Thermostat

£45.55 Excluding VAT
A smarter way to control your underfloor heating from anywhere via your smartphone This Heatmiser neoStat is 12v powered and is the ideal upgrade route for those wanting app control and that have existing low voltage cabling installed. neoStat 12v are compatible with our 12v Wiring Centre UH1.
Close

Heatmiser Thimble Sensor

£10.28 Excluding VAT

Discreet Temperature Monitoring

The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M from the room thermostats.
Close

Heatmiser Sensor Probe Housing – EN-030

£4.95 Excluding VAT

Room Sensor Enclosure

Housing for discreet location of the sensor probe Dimensions 80Wx 80H x 22D mm
Close

Electrothermic Manifold Actuator

£11.65 Excluding VAT

Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system

Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.
Close

Heatmiser UH8-N – 8 Zone 12v Wiring Centre

£94.00 Excluding VAT
Our 8 zone 12volt Network wiring centre for optimum control of your underfloor heating system The Heatmiser UH8-N is designed to be used in conjunction with our 12v Network thermostats. The UH8-N provides central switching of up to 8 zones as well as providing an output for a hot water cylinder, the system boiler and pump. When used for underfloor heating, an option is available to use zone 8 as a conventional radiator zone. Up to 6 actuators can be connected to each zone. UH8 Dimensions 384x148x60mm
Close

Heatmiser Sensor Probe

£4.45 Excluding VAT

Remote Air/Floor Sensor Probe

The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats