Description
A digital room thermostat for controlling either individual or multiple zones of your floor heating system.The Heatmiser Slimline is the direct upgrade replacement for the PRT, PRT-RP and DT models of thermostat.
Click Here For: PRODUCT DATA SHEET
Click Here For: PRODUCT MANUAL
The Heatmiser Slimline can be adjusted on site to enable it as either programmable or non-programmable. It can also be programmed to be air sensing or remote air sensing – for remote air sensing a Sensor Probe will need to be ordered separately.
In programmable mode, the Slimline Thermostat features a 5/2 day or 7 day programmer. The Slimline is a room thermostat and programmer all-in-one, providing up to 4 different temperatures at different times of the day. It includes Optimum Start which is an energy saving feature designed to reduce the amount of heat-up time required, depending on the conditions in the building. In addition, this thermostat includes a keypad lock – so you can finally stop the fiddling.
For Multi Zone Control, this thermostat should be installed into each zone/room (1 per zone/room) and combined with either the – UH4 (4 Zone) OR the UH8 wiring centre (8 Zone)
PLUS – Electrothermic manifold actuators (1 for each manifold port)
For bathroom installation, just add a separate Sensor Probe or Thimble Sensor – this will connect into the back of this thermostat. The thermostat is then installed outside of the bathroom and the sensing probe is passed through the wall into the bathroom – the probe can be left open in a discrete location or alternatively installed within our sensor housing.
Large Display
Non-Programmable, 5/2 day, 7 day and 24 hour programming (selectable in software)
Thermostat OR Timer Mode
Self-Learning Optimum Start
4 Comfort Levels per Day
Remote Air Sensor Facility (Remote Sensor Optional)
Temperature Hold Facility
Holiday Facility
Automatic White Back-Lit Display (Turns off after 30 seconds)
Flush Mounting
C/F Selectable
Key Locking
Frost Protection
Dimensions: 99x86x15mm (L,H,D)