Overlay Systems, Insulation & Cement Boards
ThermRite™ Aluminium Double Spreader Plate
£4.35 Excluding VATAluminium Heat Diffuser Plates – 2 Pipe Channels @ 200mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 2 channels 200mm apart, designed to locate 15 & 16mm heating pipes.
The plates are designed to fit inside standard 400mm centre to centre joist spacings.
Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Minimum Order: 20 Lengths (8.0m²)
Click Here For: PRODUCT DATA SHEET
ThermRite™ Fit From Below Aluminium Double Spreader Plate – 250mm Wide
£4.13 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 2 Pipe Channels – 250mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 250mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: For Single run between 400mm centred joists: 2.5 Plates / 1.0m²
For Double run between 600mm centred joists: 3.0 Plates / 1.0m² - Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
Minimum Order: 20 Lengths
20mm Plastic Castellated Floor Panel for 16mm Pipe
£6.25 Excluding VATFast Fit pipe retaining system with accurate pipe spacing
Designed to be screeded over
Specification:
- Low Profile: 20mm
- For 15 & 16mm Pipe
- Optional 50,100,150 & 200mm Pipe Centres
- Panel Size: 1220 x 820 x 20mm (Each Panel = 1.00m²)
HeatBoard ONE MAX – 2400x600mm – all in one 22mm Grooved Chipboard Panel
£36.90 Excluding VATEasy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
Accreditations:
- Chipboard to BS EN 312 / Type P5
Minimum Order: 15 Boards
Click Here For: PRODUCT DATA SHEET
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
£9.17 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 4 grooves @ 150mm centres + ‘bulb’ returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum order: 8 Boards
ThermRite™ Aluminium Triple Spreader Plate
£4.99 Excluding VATAluminium Heat Diffuser Plates – 3 Pipe Channels @ 150mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 3 channels 150mm apart, designed to locate 15 & 16mm heating pipes.
The plates are designed to fit inside standard 400mm centre to centre joist spacings.
Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Minimum Order: 20 Lengths (8.0m²)
Click Here For: PRODUCT DATA SHEET
18mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
£8.61 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- Low Profile (18mm)
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 4 grooves @ 150mm centres + ‘bulb’ returns with 3 straight runs at the top of each panel for flow and returns
- For 12mm Pipe
Minimum order: 8 Boards
ThermRite™ Fit From Below Aluminium Spreader Plate – 150mm Wide
£4.13 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 2 Pipe Channels – 150mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 150mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: (For Double run between 400mm and Triple run between 600mm centred joists):
5.0 Plates / 1.0m² - Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
Minimum Order: 20 Lengths
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 3 Grooves at 200mm Centres – Accepts Tile or Wood Floors Directly
£8.83 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 3 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum order: 8 Boards
HeatBoard ONE MAX PLUS – 2400x600mm – all in one 22mm Foiled & Grooved Chipboard Panel – High Heat Output
£42.50 Excluding VATHigh Output – Easy Lay Foiled Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
Accreditations:
- Chipboard to BS EN 312 / Type P5
Minimum Order: 15 Boards
Click Here For: PRODUCT DATA SHEET
ThermRite™ Joisted Floor Insulation Panel – 2 Grooves at 200mm centres
£8.26 – £8.59 Excluding VATBetween Joist Underfloor Heating Panels
Install Between Joist – No Raise In Floor Height
Specification:
- Size: Length- 1200, Width- 350 (Each panel = 0.42m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 2 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum Order 24 Boards (10.0m²)
PROLEVEL FIBRE: Reinforced Flexible Self Levelling Compound
£19.55 Excluding VATHigh Strength Fibre Reinforced, Deep Fill Self Levelling Compound – the ideal solution for Self Levelling over our Profix Panel Systems
Specification:
- 20kg Bag
- Coverage: Standard Levelling: 3mm layer: 1 Bag = 3.9m²
Minimum Order: 10 Bags
Click Here For: PRODUCT DATA SHEET
Profix™ PLUS Panel – 20mm Depth
£7.75 Excluding VATThe ULTRA Warm, Fast Fit Overlay Underfloor Heating System for 16mm pipe.
- High Heat Output
- Self Adhesive
- Interlocking System
- Variable Pipe Spacing Options from 50mm
- Ideally suited to 16mm Pipe
- Low Profile: 20mm
- Panel Size: 1200 x 600mm
Panel Coverage: 0.72m²
Click Here For: PRODUCT DATA SHEET
ThermRite™ PRO Adhesive – 500ml
£6.99 Excluding VATHigh Performace Contact Adhesive – Specifically designed and approved for use with our ThermRite PRO EPS Panels
Features:
- Easy-Application
- Fast-Drying
- Non-Chlorinated
- Extremely Tacky
- High Solids Formulation
- Long Open-Time
- Coverage: 1 Can = 5.0m²
ThermRite™ Routed Dry Screed Overlay Board with Turns
£24.60 Excluding VATLow Profile, High Strength, Grooved Cement Boards to enable tiling directly on top, incorporating turns on the board – no need for additional turning boards
Universal’ design with “lightbulb” turns at the end of the panels and 3x cross runs machined into the top of panel for easy routing of the flow and return pipes.
4 grooves at 150mm centres for 12mm Pipe
Tongue and Groove interlocking glued joints – No screws required
Specification:
- Board Height: 18mm
- Board Size: 1200 x 600mm
- Grooves: 4 @ 150mm Centres for 12mm pipe
- Board Coverage: 0.72m²
Features:
- No need for seperate turning panels
- Very low thermal resistance (0.045m /kW)
- High thermal conductivity (0.40W/mK)
- Low thermal expansion
- Only 18mm thick
- Doesn’t contract or expand like chipboard when exposed to water
- High impact resistance
- Tongue & groove edge detail – no screws required
- Quick and easy to install
- Accepts ceramic tiles
Minimum Order: 10 Boards (7.2m²)
High Performance FLAT (Non Routed) Dry Screed Overlay Cement Boards for underfloor heating
£19.50 Excluding VATThe ideal product for use directly onto our Grooved Insulation Boards to enable tiling on top.
Tongue and Groove interlocking glued joints – No screws required
Specification:
- Board Height: 18mm
- Board Size: 1200 x 600mm
- Board Coverage: 0.72m²
Features:
- Very low thermal resistance (0.045m /kW)
- High thermal conductivity (0.40W/mK)
- Low thermal expansion
- Only 18mm thick
- Doesn’t contract or expand like chipboard when exposed to water
- High impact resistance
- Tongue & groove edge detail – no screws required
- Quick and easy to install
- Accepts ceramic tiles
Minimum Order: 10 Boards (7.2m²)
Profix Insulation Board – 3.0mm – 25mm
£2.95 – £11.75 Excluding VATOptional Insulation Board – designed to insulate below Profix Panels
Dry lay below the Profix panels to add an extra level of insulation.
Specification:
- Size: 1200 x 600m
- Coverage: 0.72m² / Board
- Available Thickness, 3.0, 6.0, 10.0, 20.0 & 25.0mm
- High Compressive Strength of 30 Tonnes / m² (300kPa)
- Thermal conductivity = 0.035 W/mK
- Fire Classification = Euroclass E
Minimum Order: 14 Boards
ThermRite™ Joisted Floor Insulation Panel – 3 Grooves at 115mm centres
£8.54 – £9.36 Excluding VATBetween Joist Underfloor Heating Panels
Install Between Joist – No Raise In Floor Height
Specification:
- Size: Length- 1200, Width- 350 (Each panel = 0.42m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 3 grooves @ 115mm centres + lightbulb returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum Order 24 Boards (10.0m²)