WATER UNDERFLOOR HEATING
ThermRite™ Joisted Floor Insulation Panel – 2 Grooves at 200mm centres
Between Joist Underfloor Heating Panels
Install Between Joist - No Raise In Floor HeightSpecification:
- Size: Length- 1200, Width- 350 (Each panel = 0.42m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 2 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
ThermRite™ Joisted Floor Insulation Panel – 3 Grooves at 115mm centres
Between Joist Underfloor Heating Panels
Install Between Joist - No Raise In Floor HeightSpecification:
- Size: Length- 1200, Width- 350 (Each panel = 0.42m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 3 grooves @ 115mm centres + lightbulb returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
ThermRite™ Routed Dry Screed Overlay Board with Turns
Low Profile, High Strength, Grooved Cement Boards to enable tiling directly on top, incorporating turns on the board - no need for additional turning boards
Universal’ design with "lightbulb" turns at the end of the panels and 3x cross runs machined into the top of panel for easy routing of the flow and return pipes. 4 grooves at 150mm centres for 12mm Pipe Tongue and Groove interlocking glued joints - No screws requiredSpecification:
- Board Height: 18mm
- Board Size: 1200 x 600mm
- Grooves: 4 @ 150mm Centres for 12mm pipe
- Board Coverage: 0.72m²
Features:
- No need for seperate turning panels
- Very low thermal resistance (0.045m /kW)
- High thermal conductivity (0.40W/mK)
- Low thermal expansion
- Only 18mm thick
- Doesn't contract or expand like chipboard when exposed to water
- High impact resistance
- Tongue & groove edge detail - no screws required
- Quick and easy to install
- Accepts ceramic tiles
Wireless Thermostat – Heatmiser Slimline-RF V3
A wireless solution to control your underfloor heating
The Heatmiser Slimline-RF V3 wireless thermostat works with the Heatmiser RF Switch & UH8-RF Wireless Wiring Centre. The wireless thermostat is designed to be wall mounted in the area being controlled, up to 100 meters open space from the receiver.Click Here For: Slimline-RF Product Manual
Wireless Thermostat & Receiver – Slimline-RF Kit V3
A wireless solution to control your underfloor heating
The Heatmiser Slimline-RF Kit comprises of a Heatmiser Slimline-RF Multi Mode Thermostat and RF-Switch wireless receiver. The receiver is hard wired to the boiler, so is normally positioned next to the boiler or you could use the existing thermostat cabling. The wireless thermostat is then wall mounted within range of the receiver (up to 100 meters open space)Click Here For: Slimline-RF Product Manual
Click Here For: RF Switch Product Manual
12.0m² Single Room Warm Water Underfloor Heating System
Designed to connect directly to an existing radiator circuit
System Includes:- A Rated Grundfos Pump and Single Zone Mixing Valve
- Professional Grade 5 Layer Premium Pipe x 60 metres
- Room Thermostat
- Fixing Clips x 100
- Edge Insulation x 50 metres
- Pipe Cutters
- Pipe Reaming Tool
- Flow and Return Connections & Fixing kit
18.0m² Profix Overlay Underfloor Heating Complete System
A High Output, Fast Fit Underfloor Heating System
Features:
- Only 15mm Deep
- Install Tiles and floor finishes directly on top.
- Includes Pipe Layout
System Includes:
- 50 x Low Profile Profix Panels
- A Rated Grundfos Pump and Mixing Valve
- 2 Port Dualmix Manifold & Connectors
- High Specification 5 Layer Pert-Al-Pert pipe x 160 metres
- Digital Programmable Thermostat
- Pipe Cutters
- Pipe Reaming Tool
18.0m² ThermRite™ PRO Ultra Low 16mm Premium Dual Purpose Underfloor Heating Complete System
A 16mm Dual Purpose High Output, Premium Underfloor Heating Panel System
Features:
- Only 16mm Deep
- For 12mm Pipe
- Tile Directly on top
- Dual Purpose - For Tile/Wood/Laminate & Vinyl floors
- Includes Pipe Layout
System Includes:
- 25 x ThermRite™ PRO Panels
- High Strength: 400kpA compressive strength
- High Output: Thick 200 micron aluminium reflective foil covering
- A Rated Grundfos Pump and Mixing Valve
- 2 Port Dualmix Manifold & Connectors
- 12mm Professional Grade 5 Layer Premium Pipe x 160 metres
- Digital Programmable Thermostat
- Pipe Cutters
- Pipe Reaming Tool
20.0m² ThermRite™ PRO Premium Dual Purpose Underfloor Heating Complete System
A 20mm Dual Purpose High Output, Premium Underfloor Heating Panel System
Features:
- Only 20mm Deep
- For 16mm Pipe
- Tile Directly on top
- Dual Purpose - For Tile/Wood/Laminate & Vinyl floors
- Includes Pipe Layout
System Includes:
- 28 x ThermRite™ PRO Panels
- High Strength: 400kpA compressive strength
- High Output: Thick 200 micron aluminium reflective foil covering
- A Rated Grundfos Pump and Mixing Valve
- 2 Port Dualmix Manifold & Connectors
- 16mm Professional Grade European Standard 5 Layer Pert-Al-Pert Pipe x 150 metres (upgradable to Pex-Al-Pex below)
- Digital Programmable Thermostat
- Pipe Cutters
- Pipe Reaming Tool
30.0m² Multi-Zone Water Underfloor Heating System
System Includes:
- A Rated Grundfos Pump and Mixing Valve
- 2 Port Dualmix Manifold & Connectors
- Professional Grade European Standard 5 Layer Pert-Al-Pert Pipe x 150 metres (upgradable to Pex-Al-Pex below)
- Digital Programmable Thermostat
- Fixing Clips x 200
- Edge Insulation x 50 metres
- Pipe Cutters
- Pipe Reaming Tool
30.0m² Profix™ PLUS Ultra Warm Overlay Underfloor Heating Complete System
A High Output, Self Adhesive Underfloor Heating Panel System
Click Here For: PRODUCT DATA SHEET
Features:
- Only 20mm Deep
- For 16mm Pipe
- Self Adhesive Panel
- Includes Pipe Layout
System Includes:
- 42 x Profix PLUS Panels
- A Rated Grundfos Pump and Mixing Valve
- 2 Port Dualmix Manifold & Connectors
- 16mm Professional Grade 5 Layer Premium Pipe x 150 metres
- Digital Programmable Thermostat
- Pipe Cutters
- Pipe Reaming Tool
30.0m² Water Underfloor Heating – CUSTOM PACK
A fully customisable base kit with selectable options available to build your chosen syste
This base kit includes sufficient pipe and correctly sized pump and manifold to cover:
30.0m² @ Standard 200mm pipe spacing
22.5m² @ High Output 150mm pipe spacing
Base Kit Includes:
- A Rated Pump and Mixing Valve
- Dualmix Manifold & Connectors
- Professional Grade 5 Layer Premium Pipe x 150 metres
Connector Core – Compression Fit
HeatBoard ONE – 1200x600mm – Easy Lay – all in one 22mm Grooved Chipboard Panel
Easy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
CLICK HERE FOR: ThermRite 6mm Fibre Cement Cover Boards
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 1200mm, Height: 22mm
- Board Coverage: 0.72m²
- Weight: 10 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
- Chipboard to BS EN 312 / Type P5
Click Here For: PRODUCT DATA SHEET
Heatmiser 4 Zone Wiring Centre – UH4
Our 4 zone wiring centre for optimum control of your underfloor heating system
The Heatmiser UH4 can be used in conjunction with our mains thermostats. The UH4 provides central switching of up to 4 zones as well as providing an output for a hot water cylinder, the system boiler and pump. When used for underfloor heating, an option is available to use zone 4 as a conventional radiator zone. Up to 6 actuators can be connected to each zone. UH4 Dimensions 384x148x60mmClick for: Product Installation & Data Sheet
Heatmiser Dial Thermostat with LCD DS1-L V2
A Dial Type Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS1 is our 230v, electronic room thermostat incorporating an LCD. In normal operation, the actual room temperature is displayed on the LCD, rotating the dial will display the set temperature for 5 seconds.Click Here For: DS1-L Product Manual
Heatmiser neoAir V3-M Wireless Programmable Smart Thermostat
A smarter way to control your underfloor heating from anywhere via your smartphone
The neoAir is ideal for those looking for a totally wire free App controllable solution of your heating & hot water. Both the UH8-RF and RF Switch receivers are compatible with the neoAir.Click for: Product Installation & Data Sheet
Heatmiser neoKit 2 Gen 2 V2
Complete installation kit to control your new or existing heating system from anywhere via your smartphone
The Heatmiser neoKit 2 Gen 2 includes 1 neoStat V2, 1 neoStat-hw and a neoHub Gen 2, allowing you to take control of your heating and hot water from anywhere. The Gen 2 neoHub brings HomeKit support to all connected Neo Devices. Upgrading your system is as easy as swapping your existing mains thermostat to the new neoStat and plugging the neoHub into your router.Click Here For: NeoStat V2 Product Manual
Click Here For: NeoStat HW Product Manual
Click Here For: NeoHub Product Manual
Heatmiser Set Back Thermostat DS-SB-V3
A Dial Type Set Back Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS-SB features a set back function, a function that will automatically reduce the set temperature by 4C when no time clock signal is detected therefore providing more flexible control of your heating.Click Here For: DS-SB Product Manual
Heatmiser Touch Carbon Thermostat
A Touchscreen Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system
The Heatmiser Touch Carbon is our 230v powered “All Black” TouchScreen Thermostat featuring a negative Touchscreen LCD and is the ideal choice for those wanting an ultra modern thermostat. The Touch Carbon is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution.Click Here For: Touch Carbon Product Manual
Heatmiser Wireless Air Sensor
A Wireless Air Sensor for optimum control of your heating system
The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required. The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.Click Here For: Wireless Air Sensor Datasheet
Pipe Fixing Clip Rail – Self-Adhesive Backing – 1.0 Metre Interlocking Lengths
Professional Pipe Decoiler
Pump Connection Coupling – Compression Fit (Pack of 2)
Pump Connection Coupling – Compression Fit with Isolation Valves (Pack of 2)
Standard Manifold System – with Manual Air Vents
Premium Stainless Steel, ThermRite™ Dualmix Manifold Assembly with Manual Air Vents
- Pre-Assembled onto brackets for easy install
- Supplied complete with pipe connector cores
Click Here For: PRODUCT DATA SHEET
Manifold Assembly Includes:
- 2 x Manifold body (flow and return)
- Lockshields with flow meters on each port (0-5 l/min)
- 2 x Isolation ball valves
- Manual adjustment valves on each port (interchangeable to actuators)
- 2 x Water drain/fill valves with blank cap
- 2 x Manual air vents
- 2 x Metal fixing brackets
- Pipe connectors (Eurocone Pipe Connectors)
- Installation manual
ThermRite™ Routed Dry Screed Overlay Boards (Plain Edge) with Straight Runs (no turns)
Low Profile, High Strength, Grooved Cement Boards to enable tiling directly on top.
Plain Edge ProfileSpecification:
- Board Height: 18mm
- Board Size: 800 x 600mm
- Grooves: 4 @ 150mm Centres for 12mm pipe
- Board Coverage: 0.42m²
Features:
- Very low thermal resistance (0.045m /kW)
- High thermal conductivity (0.40W/mK)
- Low thermal expansion
- Only 18mm thick
- Doesn't contract or expand like chipboard when exposed to water
- High impact resistance
- Plain Edge Profile
- Quick and easy to install
- Accepts ceramic tiles
ThermRite™ Routed Dry Screed Overlay Boards (Tongue & Groove) with Straight Runs (no turns)
Low Profile, High Strength, Grooved Cement Boards to enable tiling directly on top.
Tongue and Groove interlocking glued joints - No screws requiredSpecification:
- Board Height: 18mm
- Board Size: 1200 x 600mm
- Grooves: 4 @ 150mm Centres for 12mm pipe
- Board Coverage: 0.72m²
Features:
- Very low thermal resistance (0.045m /kW)
- High thermal conductivity (0.40W/mK)
- Low thermal expansion
- Only 18mm thick
- Doesn't contract or expand like chipboard when exposed to water
- High impact resistance
- Tongue & groove edge detail - no screws required
- Quick and easy to install
- Accepts ceramic tiles