Heatmiser Slimline V4 – Digital Programmable Thermostat

£38.50 Excluding VAT

A Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system

The Heatmiser Slimline V4 is a 230volt powered programmable thermostat and is a room thermostat and programmer in one, providing up to 4 different temperatures at different times of the day. The Slimline V4 Thermostat is the ideal upgrade route for those with an existing mains powered thermostat and can be set to work as a non programmable, 5/2 day or 7 day programmable.

Click for: Product Installation & Data Sheet

Click Here For: PRODUCT MANUAL

Heatmiser Thimble Sensor

£11.26 Excluding VAT

Discreet Temperature Monitoring

The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.

Click for: Product Installation & Data Sheet

Heatmiser Sensor Probe Housing – EN030

£5.05 Excluding VAT

Room Sensor Enclosure

Housing for discreet location of the sensor probe Dimensions 80Wx 80H x 22D mm

Electrothermic Manifold Actuator

£11.25 Excluding VAT

Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system

Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.

Click Here For: Actuator Datasheet

Heatmiser Sensor Probe

£4.60 Excluding VAT

Remote Air/Floor Sensor Probe

The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats