Thermostats & Controls
Find the right thermostat for your home: From programmable to voice controlled smart options.
In-Screed Cable – Plastic Fixing Strip
£0.80 Excluding VATA moulded plastic fixing strip with cable radius profile fixing.
Available in 500mm lengths which can provide cable spacing of 65mm. Can be mechanically fixed or taped to the subfloor. Cables are then tensioned through the profile strip when laying. An extremely quick and efficient method of cable spacing and laying.
Strip Length: 500mm
Heatmiser Sensor Probe
£4.60 Excluding VATRemote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor.
This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Suitable for all Heatmiser Thermostats
Heatmiser Sensor Probe Housing – EN030
£5.05 Excluding VATRoom Sensor Enclosure
Housing for discreet location of the sensor probe
Dimensions 80Wx 80H x 22D mm
High Temperature Fixing Tape
£5.55 Excluding VATHeavy duty adhesive tape available in a 15mm x 50m roll.
Hi-tack for fixing and locating cable. Always ensure sub-floor surface is dry and dust free.
Roll Dimensions: 15mm x 50 metres
In-Screed Cable – Fixing Clip Pack
£6.95 Excluding VATPlastic fixing clip for attaching cable on to foil foam backed insulation material. Deep barbed design provides secure fixing.
Pack Contents: 50 Clips
Heatmiser neoAir Stand
£6.99 Excluding VATThe Heatmiser neoAir Stand has been specifically designed for the neoAir, allowing you to position the neoAir thermostat on a table.
Colour: White
Electrothermic Manifold Actuator
£11.25 Excluding VATManifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.
Click Here For: Actuator Datasheet
Heatmiser Thimble Sensor
£11.26 Excluding VATDiscreet Temperature Monitoring
The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly.
Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall.
The thimble sensor can be wired up to 20M away from the room thermostats.
Click for: Product Installation & Data Sheet
Heatmiser Wireless Air Sensor
£12.25 Excluding VATA Wireless Air Sensor for optimum control of your heating system
The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required.
The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.
Click Here For: Wireless Air Sensor Datasheet
Flexel Sensor Probe
£12.95 Excluding VATRemote Air/Floor Sensor Probe
This sensor can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
For Use with:
- V22/V23 Thermostat/Receiver
- Flexel Touch Thermostat
- TH232 Thermostat
In-Screed Cable – Galvanised Fixing Strip
£13.95 Excluding VATAvailable as a 10m roll of galvanised steel strip. The product has cable fixing lugs at 35mm centres. Ideal when laying thicker cables on all sub-floor types. The ultimate in flexibility.
Roll Length: 10 Metres
Heatmiser Dial Thermostat – DS1 V2
£14.99 Excluding VATA Dial Type Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS1 is our 230v, electronic room thermostat, ideal for conventional or combi-boiler systems.
Includes Optional Remote Air Sensing Mode
Click Here For: DS1 V2 Product Manual
Heatmiser Wireless Window/Door Switch
£15.20 Excluding VATA Wireless Window/Door Sensor for optimum control of your heating system
The Wireless Window / Door Sensor can be used with the Touch V2, Edge and Neo System and and is used to switch the heating off whenever a window or door is opened.
The Wireless Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.
Click Here For: Wireless Contact Sensor Datasheet
External Aerial for Heatmiser UH8-RF – Heatmiser EA1
£20.55 Excluding VATExtend your wireless signals
Our external aerial is designed to work with our UH8-RF Wireless Wiring Centre.
Radio Frequency (RF) communication is affected by metal objects and so this external aerial is ideal for those installations where the UH8-RF will be installed in a metal cupboard.
It is also perfect for extending the RF coverage within your property.
Heatmiser Dial Thermostat with LCD DS1-L V2
£24.95 Excluding VATA Dial Type Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS1 is our 230v, electronic room thermostat incorporating an LCD. In normal operation, the actual room temperature is displayed on the LCD, rotating the dial will display the set temperature for 5 seconds.
Click Here For: DS1-L Product Manual
Heatmiser Set Back Thermostat DS-SB-V3
£26.85 Excluding VATA Dial Type Set Back Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS-SB features a set back function, a function that will automatically reduce the set temperature by 4C when no time clock signal is detected therefore providing more flexible control of your heating.
Click Here For: DS-SB Product Manual
Two Channel Wireless Receiver – Heatmiser RF Switch V2
£28.60 Excluding VATWireless 2 Channel Receiver
The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler.
In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.
Click for: Product Installation & Data Sheet
16amp Wireless Electric Heating Receiver – RF Switch 16A
£31.50 Excluding VATWireless 16amp Receiver
The RF-Switch 16A is our surface mount wireless receiver for electric heating. It is capable of switching up to 16A.
Please note this is not designed for electric floor heating as there is no floor limiting sensor function.
The RF Switch is compatible with the Slimline-RF and neoAir.
Wireless Thermostat – Heatmiser Slimline-RF V3
£34.75 Excluding VATA wireless solution to control your underfloor heating
The Heatmiser Slimline-RF V3 wireless thermostat works with the Heatmiser RF Switch & UH8-RF Wireless Wiring Centre.
The wireless thermostat is designed to be wall mounted in the area being controlled, up to 100 meters open space from the receiver.
Click Here For: Slimline-RF Product Manual
Heatmiser Slimline-B V3 Battery Powered Programmable Thermostat
£35.65 Excluding VATA Battery Powered Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system
Our Slimline-B V3 battery thermostat offers a viable upgrade route for those with a dial thermostat working on a two wire system.
Click Here For: Slimline-B Product Manual
Heatmiser Edge – Multi Mode Programmable Room Thermostat
£35.95 Excluding VATA Digital Programmable Room Thermostat that can be combined with wireless sensors for optimum control
Heatmiser edge offers a great upgrade route for those with an existing dial thermostat or for those looking to measure the temperature remote from the thermostat.
The wireless air sensor function is perfect for those looking to measure the temperature in another location and for those with larger open plan properties, multiple air sensors can be used to create an average temperature.
Click Here For: Heatmiser EDGE Product Manual
Heatmiser Slimline V4 – Digital Programmable Thermostat
£38.50 Excluding VATA Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system
The Heatmiser Slimline V4 is a 230volt powered programmable thermostat and is a room thermostat and programmer in one, providing up to 4 different temperatures at different times of the day.
The Slimline V4 Thermostat is the ideal upgrade route for those with an existing mains powered thermostat and can be set to work as a non programmable, 5/2 day or 7 day programmable.
Click for: Product Installation & Data Sheet
Click Here For: PRODUCT MANUAL
Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3
£38.95 Excluding VATThe Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind
The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat.
A 3M remote floor sensor is provided.
NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.
Click Here For: Slimline-E V3 Product Manual
Heatmiser neoPlug – Smart Plug
£39.95 Excluding VATExpand your Neo System with neoPlug and control your Appliances from Anywhere!
With the Heatmiser neoPlug you can control the appliance manually from the neoApp or you can program switching times via the app that the appliance will follow.
With the latest apps for Android, Windows 10 and iOS, users can include the neoPlug in their Geo Location triggers, so the appliance can turn on when you get close to home or when you leave.
Click Here For: NeoPlug Data Sheet
Heatmiser Boost – Neo & RF Series Repeater
£40.55 Excluding VATBoost your Wireless and Neo signals
The Heatmiser Boost is our Neo & RF Series Repeater. The Boost is surface mount for easy installation and can be used to repeat the RF and Neo Data signals.
Heatmiser 4 Zone Wiring Centre – UH4
£42.57 Excluding VATOur 4 zone wiring centre for optimum control of your underfloor heating system
The Heatmiser UH4 can be used in conjunction with our mains thermostats. The UH4 provides central switching of up to 4 zones as well as providing an output for a hot water cylinder, the system boiler and pump.
When used for underfloor heating, an option is available to use zone 4 as a conventional radiator zone. Up to 6 actuators can be connected to each zone.
UH4 Dimensions 384x148x60mm
Click for: Product Installation & Data Sheet
Analogue Room Thermostat – TH131
£43.65 Excluding VATThe TH131 is an electronic thermostat developed for optimal regulation of underfloor heating systems.
The TH131 is a simple to use thermostat. Temperature control is via a simple analogue dial.
The thermostat has three modes of operation. Choose between room thermostat, floor thermostat or a combination of room thermostat with floor limit sensor.
Click Here For: TH131 Product Manual
Heatmiser neoStat-hw V2 – Hot Water Programmer
Original price was: £55.50.£45.50Current price is: £45.50. Excluding VATA smarter way to control your hot water from anywhere via your smartphone.
The neoStat-hw V2 is a 230v powered timer and communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.
Click for: Product Installation & Data Sheet
Heatmiser neoStat V2 – Programmable Thermostat
£46.80 Excluding VATA smarter way to control your underfloor heating from anywhere via your smartphone
The neoStat V2 is a 230v powered programmable thermostat and communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.
Click for: Product Installation & Data Sheet
Heatmiser neoAir V3-M Wireless Programmable Smart Thermostat
£48.25 Excluding VATA smarter way to control your underfloor heating from anywhere via your smartphone
The neoAir is ideal for those looking for a totally wire free App controllable solution of your heating & hot water.
Both the UH8-RF and RF Switch receivers are compatible with the neoAir.
Click for: Product Installation & Data Sheet
Heatmiser 8 Zone Wiring Centre – UH8
£49.48 Excluding VATOur 8 zone wiring centre for optimum control of your underfloor heating system
The Heatmiser UH8 can be used in conjunction with our mains thermostats. The UH8 provides central switching of up to 8 zones as well as providing an output for a hot water cylinder, the system boiler and pump.
When used for underfloor heating, an option is available to use zone 8 as a conventional radiator zone. Up to 6 actuators can be connected to each zone.
UH8 Dimensions 384x148x60mm
Click for: Product Installation & Data Sheet
Heatmiser 6 Zone Compact Wiring Centre – UH6
£49.50 Excluding VATOur 6 zone compact wiring centre for optimum control of your underfloor heating system
The Heatmiser UH6 is our 6 Zone underfloor heating wiring centre designed to work with our 230v Thermostats.
The UH6 wiring centre provides central switching and is therefore ideally situated next to the underfloor heating manifold. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.
Up to 4 actuators can be connected to each zone.
Features:
- Central wiring for up to 6 zones
- DIN Rail Mounting Option (DIN Rail not included)
- Output for underfloor heating valve and pump activated when any thermostat calls for heat
- Actuator outputs: 230v
- Dimensions (LxHxD) 384x148x60mm