Thermostats & Controls
Find the right thermostat for your home: From programmable to voice controlled smart options.
Electrothermic Manifold Actuator
Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.Click Here For: Actuator Datasheet
Heatmiser Sensor Probe
Remote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats
Heatmiser Slimline-B V3 Battery Powered Programmable Thermostat
A Battery Powered Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system
Our Slimline-B V3 battery thermostat offers a viable upgrade route for those with a dial thermostat working on a two wire system.
Click Here For: Slimline-B Product Manual
Wireless Thermostat – Heatmiser Slimline-RF V3
A wireless solution to control your underfloor heating
The Heatmiser Slimline-RF V3 wireless thermostat works with the Heatmiser RF Switch & UH8-RF Wireless Wiring Centre. The wireless thermostat is designed to be wall mounted in the area being controlled, up to 100 meters open space from the receiver.Click Here For: Slimline-RF Product Manual
Heatmiser Slimline V4 – Digital Programmable Thermostat
A Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system
The Heatmiser Slimline V4 is a 230volt powered programmable thermostat and is a room thermostat and programmer in one, providing up to 4 different temperatures at different times of the day. The Slimline V4 Thermostat is the ideal upgrade route for those with an existing mains powered thermostat and can be set to work as a non programmable, 5/2 day or 7 day programmable.Click for: Product Installation & Data Sheet
Click Here For: PRODUCT MANUAL
In-Screed Cable – Fixing Clip Pack
In-Screed Cable – Plastic Fixing Strip
A moulded plastic fixing strip with cable radius profile fixing.
Available in 500mm lengths which can provide cable spacing of 65mm. Can be mechanically fixed or taped to the subfloor. Cables are then tensioned through the profile strip when laying. An extremely quick and efficient method of cable spacing and laying.Strip Length: 500mm
Heatmiser Thimble Sensor
Discreet Temperature Monitoring
The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.Click for: Product Installation & Data Sheet
Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3
The Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind
The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat. A 3M remote floor sensor is provided. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Slimline-E V3 Product Manual
Heatmiser Sensor Probe Housing – EN030
Heatmiser neoAir Stand
