Shop
ThermRite™ Aluminium Double Spreader Plate
Aluminium Heat Diffuser Plates - 2 Pipe Channels @ 200mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. Each plate has 2 channels 200mm apart, designed to locate 15 & 16mm heating pipes. The plates are designed to fit inside standard 400mm centre to centre joist spacings.Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Click Here For: PRODUCT DATA SHEET
Pipe Fixing Clip Rail – Self-Adhesive Backing – 1.0 Metre Interlocking Lengths
ThermRite™ Insulation Board – Professional Grade
Optional Insulation Board - designed to insulate below underfloor heating systems
Specification:
- Size: 1200 x 600m
- Coverage: 0.72m² / Board
- Available Thickness, 3.0, 6.0, 10.0, 20.0 & 25.0mm
- High Compressive Strength of 30 Tonnes / m² (300kPa)
- Thermal conductivity = 0.035 W/mK
- Fire Classification = Euroclass E
ThermRite™ Fit From Below Aluminium Double Spreader Plate – 250mm Wide
Fit From Below High Output Aluminium Heat Diffuser Plates - 2 Pipe Channels - 250mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. The easy install option to fit your between joist underfloor heating without lifting the floor - designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installationSpecification:
- Plate Size: 1.0 Metre long x 250mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: For Single run between 400mm centred joists: 2.5 Plates / 1.0m² For Double run between 600mm centred joists: 3.0 Plates / 1.0m²
- Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
20mm Plastic Castellated Floor Panel for 16mm Pipe
Electrothermic Manifold Actuator
Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.Click Here For: Actuator Datasheet
HeatBoard ONE MAX – 2400x600mm – all in one 22mm Grooved Chipboard Panel
Easy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
- Chipboard to BS EN 312 / Type P5
Click Here For: PRODUCT DATA SHEET
Crimp Fit to Brass Tail Adaptors
The ideal fitting for connecting Pex-Al-Pex Pipe to Copper pipe.
Pex (Pressfit) to Copper (Compression) Adaptors
-
High quality plated brass construction
-
Stainless Steel Sleeves
-
Double 'o' ring secure seal
-
Safe and fast installation.
-
WRAS certified. (UK Certified for use with drinking water installations).
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
Ultra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on topFeatures:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS - Grade 300 kPa
- Design: 4 grooves @ 150mm centres + 'bulb' returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
60mm High Grip Barbed Pipe Clips 100/pack
60mm High Grip Barbed Pipe Clips 100/pack
Specifically designed for installation into rigid insulation boards (such as Kingspan and Celotex).
Clips are 60mm in length and offer high grip due to the barbed construction.
Clips can be used individually and simply pushed into position or alternatively loaded into a pipe clipping tool.
Minimum Order - 2 Packs (200 clips)
ThermRite™ Aluminium Triple Spreader Plate
Aluminium Heat Diffuser Plates - 3 Pipe Channels @ 150mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. Each plate has 3 channels 150mm apart, designed to locate 15 & 16mm heating pipes. The plates are designed to fit inside standard 400mm centre to centre joist spacings.Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Click Here For: PRODUCT DATA SHEET
18mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
Ultra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on topFeatures:
- Low Profile (18mm)
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
- Construction:XPS - Grade 300 kPa
- Design: 4 grooves @ 150mm centres + 'bulb' returns with 3 straight runs at the top of each panel for flow and returns
- For 12mm Pipe
ThermRite™ Fit From Below Aluminium Spreader Plate – 150mm Wide
Fit From Below High Output Aluminium Heat Diffuser Plates - 2 Pipe Channels - 150mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. The easy install option to fit your between joist underfloor heating without lifting the floor - designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installationSpecification:
- Plate Size: 1.0 Metre long x 150mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: (For Double run between 400mm and Triple run between 600mm centred joists): 5.0 Plates / 1.0m²
- Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 3 Grooves at 200mm Centres – Accepts Tile or Wood Floors Directly
Ultra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on topFeatures:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS - Grade 300 kPa
- Design: 3 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Equal Elbows – Crimp Fit
Connector Core – Compression Fit
Heatmiser neoStat V2 – Programmable Thermostat
A smarter way to control your underfloor heating from anywhere via your smartphone
The neoStat V2 is a 230v powered programmable thermostat and communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.Click for: Product Installation & Data Sheet
ThermRite™ Backer Board – High Strength Insulation
EQUAL TEE – Crimp Fit
HeatBoard ONE MAX PLUS – 2400x600mm – all in one 22mm Foiled & Grooved Chipboard Panel – High Heat Output
High Output - Easy Lay Foiled Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
- Chipboard to BS EN 312 / Type P5
Click Here For: PRODUCT DATA SHEET
Heatmiser neoAir V3-M Wireless Programmable Smart Thermostat
A smarter way to control your underfloor heating from anywhere via your smartphone
The neoAir is ideal for those looking for a totally wire free App controllable solution of your heating & hot water. Both the UH8-RF and RF Switch receivers are compatible with the neoAir.Click for: Product Installation & Data Sheet
ThermRite™ Joisted Floor Insulation Panel – 2 Grooves at 200mm centres
Between Joist Underfloor Heating Panels
Install Between Joist - No Raise In Floor HeightSpecification:
- Size: Length- 1200, Width- 350 (Each panel = 0.42m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 2 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
PROLEVEL FIBRE: Reinforced Flexible Self Levelling Compound
High Strength Fibre Reinforced, Deep Fill Self Levelling Compound - the ideal solution for Self Levelling over our Profix Panel Systems
Specification:- 20kg Bag
- Coverage: Standard Levelling: 3mm layer: 1 Bag = 3.9m²
Click Here For: PRODUCT DATA SHEET
Profix™ PLUS Panel – 20mm Depth
The ULTRA Warm, Fast Fit Overlay Underfloor Heating System for 16mm pipe.
- High Heat Output
- Self Adhesive
- Interlocking System
- Variable Pipe Spacing Options from 50mm
- Ideally suited to 16mm Pipe
- Low Profile: 20mm
- Panel Size: 1200 x 600mm
Click Here For: PRODUCT DATA SHEET
EQUAL Straight Union – Crimp Fit
Heatmiser Sensor Probe
Remote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats16mm – PREMIUM PEX-AL-PEX Pipe – WRAS Approved
16mm High Specification multiple layer Pex-Al-Pex pipe
This Pex-AL-Pex 5 layer 16mm pipe outperforms older PEXa & PEXb type pipes in all aspects. Pex-Al-Pex is unrivalled in its suitability for underfloor heating systems.Specification:
- 16mm diameter
- Service temperatures: 40°C - 95°C
- Maximum working pressure: 10bar
- Five-layer composite pipe
- Combines the benefits of both metal and plastic pipes
- Aluminium core prevents the ingress of oxygen
- Flexible yet formstable
- Safe and fast installation
- WRAS certified
- 50 Year Guarantee
Heatmiser neoStat-e V2 – Electric Floor Heating Thermostat
A smarter way to control your underfloor heating from anywhere via your smartphone
The Heatmiser neoStat-e is our electric floor heating model, capable of switching up to 16A. A 3M remote floor sensor is provided and the neoStat-e can be used alongside all other neoStat models on the same system. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: NeoStat-E V2 Product Manual
ThermRite™ PRO Adhesive – 500ml
UN-EQUAL (Reducing) Tee – Crimp Fit
Crimp Fit to Copper Compression Adaptors
The ideal fitting for connecting Pex-Al-Pex Pipe to Copper pipe.
Pex (Pressfit) to Copper (Compression) Adaptors
-
High quality plated brass construction
-
Stainless Steel Sleeves
-
Double 'o' ring secure seal
-
Safe and fast installation.
-
WRAS certified. (UK Certified for use with drinking water installations).