Overlay Underfloor Heating Systems
Profix Insulation Board – 3.0mm – 25mm
£2.95 – £11.75 Excluding VATOptional Insulation Board – designed to insulate below Profix Panels
Dry lay below the Profix panels to add an extra level of insulation.
Specification:
- Size: 1200 x 600m
- Coverage: 0.72m² / Board
- Available Thickness, 3.0, 6.0, 10.0, 20.0 & 25.0mm
- High Compressive Strength of 30 Tonnes / m² (300kPa)
- Thermal conductivity = 0.035 W/mK
- Fire Classification = Euroclass E
Minimum Order: 14 Boards
Fixing Screws for 6mm Fibre Cement Boards (200 per box)
£5.95 Excluding VATScrews for fixing ThermRite 6mm Fibre Cement Boards to Routed Chipboard (200x per box)
Approx 48x Screws Per 1200×800 Cement Board (Each Box of 200x ThermRite RTCHIP-CB-Screws Will Cover Approxiomately 4m²)
Click Here For: 6mm FIBRE CEMENT BOARD PRODUCT DATA SHEET
ThermRite™ PRO Adhesive – 500ml
£6.99 Excluding VATHigh Performace Contact Adhesive – Specifically designed and approved for use with our ThermRite PRO EPS Panels
Features:
- Easy-Application
- Fast-Drying
- Non-Chlorinated
- Extremely Tacky
- High Solids Formulation
- Long Open-Time
- Coverage: 1 Can = 5.0m²
ThermRite™ Joisted Floor Insulation Panel – 2 Grooves at 200mm centres
£8.26 – £8.59 Excluding VATBetween Joist Underfloor Heating Panels
Install Between Joist – No Raise In Floor Height
Specification:
- Size: Length- 1200, Width- 350 (Each panel = 0.42m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 2 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum Order 24 Boards (10.0m²)
Profix™ PLUS Panel – 20mm Depth
£7.75 Excluding VATThe ULTRA Warm, Fast Fit Overlay Underfloor Heating System for 16mm pipe.
- High Heat Output
- Self Adhesive
- Interlocking System
- Variable Pipe Spacing Options from 50mm
- Ideally suited to 16mm Pipe
- Low Profile: 20mm
- Panel Size: 1200 x 600mm
Panel Coverage: 0.72m²
Click Here For: PRODUCT DATA SHEET
ThermRite™ Joisted Floor Insulation Panel – 3 Grooves at 115mm centres
£8.54 – £9.36 Excluding VATBetween Joist Underfloor Heating Panels
Install Between Joist – No Raise In Floor Height
Specification:
- Size: Length- 1200, Width- 350 (Each panel = 0.42m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 3 grooves @ 115mm centres + lightbulb returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum Order 24 Boards (10.0m²)
18mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
£8.61 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- Low Profile (18mm)
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 4 grooves @ 150mm centres + ‘bulb’ returns with 3 straight runs at the top of each panel for flow and returns
- For 12mm Pipe
Minimum order: 8 Boards
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 3 Grooves at 200mm Centres – Accepts Tile or Wood Floors Directly
£8.83 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 3 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum order: 8 Boards
Profix Highway Clip Rail Pack
£8.95 Excluding VATA purpose-made clip-rail for use with the Profix™ Low Profile Screed System
- Length 200m, Width 50mm, Height 15mm (each rail)
- Pack Quantity: 10 Rails
- Suitable for 10 & 12mm Pipe
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
£9.17 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 4 grooves @ 150mm centres + ‘bulb’ returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum order: 8 Boards
Fixing Screws For 22mm Routed Chipboard (200 per box)
£11.25 Excluding VATScrews for fixing ThermRite Routed Chipboard to Floor Joists (200x per box)
Fixings required at each cross section with the joists below (150mm in from either side of the 600mm width).
Approx 32x Screws Per 2400mmx600mm ChipBoard Panel (Each Box of 200x ThermRite RTCHIP-R-Screws Will Cover Approximately 15m²)
ThermRite 6mm Fibre Cement Cover Boards For HeatBoard ONE Panels
£13.45 Excluding VATThermRite 6mm Fibre Cement Cover Boards are high strength, water resistant cement fibre boards used as the covering layer over our HeatBoard ONE routed chipboard underfloor heating systems.
Features:
- Strengthen the surface of the routed carrier board, whilst also offering excellent and even heat transfer to the surfaces above.
- Allow for ceramic and porcelain tiles to be laid directly over the surface after installation.
- Excellent Water Resistance
- High Compressive Strength and Impact Resistance
- Easy to Install
- Mould Resistant
Specification:
- Dimensions: Width 800mm, Length: 1200mm, Height: 6mm
- Board Coverage: 0.96m²
- Weight: 9 Kg Per Panel
- Thermal Conductivity: 0.19 W/mK
- Thermal Resistance: 0.039m² K/W
Accreditations:
- Warm Water Resistance: Pass EN12467
- Freeze/Thaw Resistance: Pass EN12467
- Soak/Dry Resistance: Pass EN12467
Minimum Order: 15 Boards
Click Here For: PRODUCT DATA SHEET
HeatBoard ONE – 1200x600mm – Easy Lay – all in one 22mm Grooved Chipboard Panel
£18.85 Excluding VATEasy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
CLICK HERE FOR: ThermRite 6mm Fibre Cement Cover Boards
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 1200mm, Height: 22mm
- Board Coverage: 0.72m²
- Weight: 10 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
Accreditations:
- Chipboard to BS EN 312 / Type P5
Minimum Order: 22 Boards
Click Here For: PRODUCT DATA SHEET
PROLEVEL FIBRE: Reinforced Flexible Self Levelling Compound
£19.55 Excluding VATHigh Strength Fibre Reinforced, Deep Fill Self Levelling Compound – the ideal solution for Self Levelling over our Profix Panel Systems
Specification:
- 20kg Bag
- Coverage: Standard Levelling: 3mm layer: 1 Bag = 3.9m²
Minimum Order: 10 Bags
Click Here For: PRODUCT DATA SHEET
HeatBoard ONE PLUS – 1200x600mm – Easy Lay – all in one 22mm Foiled & Grooved Chipboard Panel – High Heat Output
£22.50 Excluding VATHigh Output – Easy Lay Foiled Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 1200mm, Height: 22mm
- Board Coverage: 0.72m²
- Weight: 10 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
Accreditations:
- Chipboard to BS EN 312 / Type P5
Minimum Order: 20 Boards