WATER UNDERFLOOR HEATING
Wet underfloor heating is similar to radiators as it uses pipes to carry hot water under your flooring and is efficient so it can reduce your energy bills. We supply water underfloor heating systems and kits which are designed for easy installation and include everything required to get the underfloor heating up and running. We can also design a bespoke system tailored precisely to your needs. The systems are fully guaranteed including a 50-year pipe warranty.
Plastic Pipe Bending Elbow
£0.48 Excluding VATUsed to assist bending our PE-RT EVOH Pipe
Not required with our aluminium core PEX-Al-PEX or PERT-Al-PERT pipe.
Minimum Order Quantity: 10
Pipe Fixing Clip Rail – Self-Adhesive Backing – 1.0 Metre Interlocking Lengths
£1.15 Excluding VATPipe Fixing Clip Rail – Self Adhesive
Pipe Fixing Clip Rail – 1.00 metre long with self adhesive strip. Easy push in clipping of our 16mm pipe.
1.00 metre long lengths are interlocking and rail is fixed to the insulation with self adhesive strip.
Minimum Order – 20 Lengths
60mm High Grip Barbed Pipe Clips 100/pack
Original price was: £2.95.£2.10Current price is: £2.10. Excluding VAT60mm High Grip Barbed Pipe Clips 100/pack
Specifically designed for installation into rigid insulation boards (such as Kingspan and Celotex).
Clips are 60mm in length and offer high grip due to the barbed construction.
Clips can be used individually and simply pushed into position or alternatively loaded into a pipe clipping tool.
Minimum Order – 2 Packs (200 clips)
Blanking Cap – 3/4″ Female Blank Cap
£2.33 Excluding VAT3/4″ Female Blanking Cap
Used to cap off unused/empty manifold ports ready for use in the future.
Connector Core – Compression Fit
£2.40 Excluding VATThe ideal fitting for conecting our Pex & Pert Pipe to our Underfloor Heating manifolds
-
High quality plated brass construction
-
Stainless Steel Sleeves
-
Double ‘o’ ring secure seal
-
Safe and fast installation.
-
WRAS certified. (UK Certified for use with drinking water installations).
ThermRite™ Aluminium Single Spreader Plate
£2.59 Excluding VATAluminium Heat Diffuser Plates – 1 Pipe Channel
Specifically designed to sit between joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 1 channel designed to locate 12 or 16mm heating pipes.
Specification:
- Plate Size: 1.0 Metre long x 140mm wide.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
Minimum Order: 35 Lengths
Profix Insulation Board – 3.0mm – 25mm
£2.95 – £11.75 Excluding VATOptional Insulation Board – designed to insulate below Profix Panels
Dry lay below the Profix panels to add an extra level of insulation.
Specification:
- Size: 1200 x 600m
- Coverage: 0.72m² / Board
- Available Thickness, 3.0, 6.0, 10.0, 20.0 & 25.0mm
- High Compressive Strength of 30 Tonnes / m² (300kPa)
- Thermal conductivity = 0.035 W/mK
- Fire Classification = Euroclass E
Minimum Order: 14 Boards
ThermRite™ Fit From Below Aluminium Single Spreader ‘J’ Plate – 180mm Wide
£3.50 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 1 Pipe Channel – 180mm Wide Plate
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 180mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Each plate has 1 channel, designed to locate 16mm heating pipes.
Minimum Order: 30 Lengths
ThermRite™ Fit From Below Aluminium Spreader Plate – 150mm Wide
£4.13 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 2 Pipe Channels – 150mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 150mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: (For Double run between 400mm and Triple run between 600mm centred joists):
5.0 Plates / 1.0m² - Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
Minimum Order: 20 Lengths
ThermRite™ Fit From Below Aluminium Double Spreader Plate – 250mm Wide
£4.13 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 2 Pipe Channels – 250mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 250mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: For Single run between 400mm centred joists: 2.5 Plates / 1.0m²
For Double run between 600mm centred joists: 3.0 Plates / 1.0m² - Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
Minimum Order: 20 Lengths
ThermRite™ Aluminium Double Spreader Plate
£4.35 Excluding VATAluminium Heat Diffuser Plates – 2 Pipe Channels @ 200mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 2 channels 200mm apart, designed to locate 15 & 16mm heating pipes.
The plates are designed to fit inside standard 400mm centre to centre joist spacings.
Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Minimum Order: 20 Lengths (8.0m²)
Click Here For: PRODUCT DATA SHEET
Pipe Reaming Tool for Pex/Pert Pipe
£4.50 – £9.00 Excluding VATProfessional reaming tool designed to bevel and round pipes in preparation for insertion of pipe fittings.
Insert the end of this tool into the pipe and within a couple of turns the strategically placed blade will bevel the end of the pipe whilst de-burring and rounding, to ensure correct preparation for installation of the pipe fittings.
Ideal for use with our Pex-Al-Pex and Pert-Al-Pert pipes. Essential tool to be used prior to installing fittings.
Select from the options below, a 16mm Reaming Tool, or the multi reamers where each Reaming Tool is suitable for 3 different pipe sizes (except for the ONLY 16mm Pipe Reaming Tool)
Heatmiser Sensor Probe
£4.60 Excluding VATRemote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor.
This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Suitable for all Heatmiser Thermostats
ThermRite™ Aluminium Triple Spreader Plate
£4.99 Excluding VATAluminium Heat Diffuser Plates – 3 Pipe Channels @ 150mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 3 channels 150mm apart, designed to locate 15 & 16mm heating pipes.
The plates are designed to fit inside standard 400mm centre to centre joist spacings.
Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Minimum Order: 20 Lengths (8.0m²)
Click Here For: PRODUCT DATA SHEET
Heatmiser Sensor Probe Housing – EN030
£5.05 Excluding VATRoom Sensor Enclosure
Housing for discreet location of the sensor probe
Dimensions 80Wx 80H x 22D mm
Pump Connection Coupling – Compression Fit (Pack of 2)
£5.95 – £8.95 Excluding VATCompression Coupling Pack
For direct connection of your copper supply pipes to our Automatic Pump & Temperature control unit.
Pack contains 2 x Fittings
ThermRite Screws For Fixing ThermRite 6mm Fibre Cement Boards to Routed Chipboard (200x per box)
£5.95 Excluding VATScrews for fixing ThermRite 6mm Fibre Cement Boards to Routed Chipboard (200x per box)
Approx 48x Screws Per 1200×800 Cement Board (Each Box of 200x ThermRite RTCHIP-CB-Screws Will Cover Approxiomately 4m²)
Click Here For: 6mm FIBRE CEMENT BOARD PRODUCT DATA SHEET
20mm Plastic Castellated Floor Panel for 16mm Pipe
£6.25 Excluding VATFast Fit pipe retaining system with accurate pipe spacing
Designed to be screeded over
Specification:
- Low Profile: 20mm
- For 15 & 16mm Pipe
- Optional 50,100,150 & 200mm Pipe Centres
- Panel Size: 1220 x 820 x 20mm (Each Panel = 1.00m²)
Heatmiser neoAir Stand
£6.99 Excluding VATThe Heatmiser neoAir Stand has been specifically designed for the neoAir, allowing you to position the neoAir thermostat on a table.
Colour: White
ThermRite™ PRO Adhesive – 500ml
£6.99 Excluding VATHigh Performace Contact Adhesive – Specifically designed and approved for use with our ThermRite PRO EPS Panels
Features:
- Easy-Application
- Fast-Drying
- Non-Chlorinated
- Extremely Tacky
- High Solids Formulation
- Long Open-Time
- Coverage: 1 Can = 5.0m²
ThermRite™ Joisted Floor Insulation Panel – 2 Grooves at 200mm centres
£8.26 – £8.59 Excluding VATBetween Joist Underfloor Heating Panels
Install Between Joist – No Raise In Floor Height
Specification:
- Size: Length- 1200, Width- 350 (Each panel = 0.42m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 2 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum Order 24 Boards (10.0m²)
Profix™ PLUS Panel – 20mm Depth
£7.75 Excluding VATThe ULTRA Warm, Fast Fit Overlay Underfloor Heating System for 16mm pipe.
- High Heat Output
- Self Adhesive
- Interlocking System
- Variable Pipe Spacing Options from 50mm
- Ideally suited to 16mm Pipe
- Low Profile: 20mm
- Panel Size: 1200 x 600mm
Panel Coverage: 0.72m²
Click Here For: PRODUCT DATA SHEET
External Bending Springs – 16, 20, 25 & 32mm
£7.75 – £11.75 Excluding VATExternal Bending Spring
Professional Bending Springs to assist in the bending of Pex-Al-Pex and Pert-Al-Pert pipes.
Specifically designed to ensure tight, unkinked bends can be formed.
Ideal for use with our Pex-Al-Pex and Pert-Al-Pert pipes.
