WATER UNDERFLOOR HEATING
Wet underfloor heating is similar to radiators as it uses pipes to carry hot water under your flooring and is efficient so it can reduce your energy bills. We supply water underfloor heating systems and kits which are designed for easy installation and include everything required to get the underfloor heating up and running. We can also design a bespoke system tailored precisely to your needs. The systems are fully guaranteed including a 50-year pipe warranty.
20mm ThermRite™ PRO – PREMIUM OUTPUT 200 Micron Foil – Dual Purpose Foiled Panel – EPS 400 – Accepts Tile or Wood Floors Directly
£9.49 Excluding VATONE PANEL FOR ALL PURPOSES – The Ideal Low Profile Solution for installation of a water system onto existing floors and install tile or wood floors directly on top
High Output 150mm Pipe Centres with Thick 200 Micron Bonded Foil – Our Highest Output Dual Purpose Insulation Board
Features:
- High Strength: 400kpA compressive strength
- High Output: Thick 200 micron aluminium reflective foil covering
- Low Profile: Only 20mm depth for 16mm pipe
- Dual Purpose: For Tile/Wood/Laminate & Vinyl floor finishes
Click for: Product Installation & Data Sheet
ThermRite™ Aluminium Double Spreader Plate
£4.35 Excluding VATAluminium Heat Diffuser Plates – 2 Pipe Channels @ 200mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 2 channels 200mm apart, designed to locate 15 & 16mm heating pipes.
The plates are designed to fit inside standard 400mm centre to centre joist spacings.
Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Minimum Order: 20 Lengths (8.0m²)
Click Here For: PRODUCT DATA SHEET
Pipe Fixing Clip Rail – Self-Adhesive Backing – 1.0 Metre Interlocking Lengths
£1.15 Excluding VATPipe Fixing Clip Rail – Self Adhesive
Pipe Fixing Clip Rail – 1.00 metre long with self adhesive strip. Easy push in clipping of our 16mm pipe.
1.00 metre long lengths are interlocking and rail is fixed to the insulation with self adhesive strip.
Minimum Order – 20 Lengths
ThermRite™ Fit From Below Aluminium Double Spreader Plate – 250mm Wide
£4.13 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 2 Pipe Channels – 250mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 250mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: For Single run between 400mm centred joists: 2.5 Plates / 1.0m²
For Double run between 600mm centred joists: 3.0 Plates / 1.0m² - Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
Minimum Order: 20 Lengths
20mm Plastic Castellated Floor Panel for 16mm Pipe
£6.25 Excluding VATFast Fit pipe retaining system with accurate pipe spacing
Designed to be screeded over
Specification:
- Low Profile: 20mm
- For 15 & 16mm Pipe
- Optional 50,100,150 & 200mm Pipe Centres
- Panel Size: 1220 x 820 x 20mm (Each Panel = 1.00m²)
Electrothermic Manifold Actuator
£11.25 Excluding VATManifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.
Click Here For: Actuator Datasheet
HeatBoard ONE MAX – 2400x600mm – all in one 22mm Grooved Chipboard Panel
£36.90 Excluding VATEasy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
Accreditations:
- Chipboard to BS EN 312 / Type P5
Minimum Order: 15 Boards
Click Here For: PRODUCT DATA SHEET
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
£9.17 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 4 grooves @ 150mm centres + ‘bulb’ returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum order: 8 Boards
60mm High Grip Barbed Pipe Clips 100/pack
Original price was: £2.95.£2.10Current price is: £2.10. Excluding VAT60mm High Grip Barbed Pipe Clips 100/pack
Specifically designed for installation into rigid insulation boards (such as Kingspan and Celotex).
Clips are 60mm in length and offer high grip due to the barbed construction.
Clips can be used individually and simply pushed into position or alternatively loaded into a pipe clipping tool.
Minimum Order – 2 Packs (200 clips)
ThermRite™ Aluminium Triple Spreader Plate
£4.99 Excluding VATAluminium Heat Diffuser Plates – 3 Pipe Channels @ 150mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 3 channels 150mm apart, designed to locate 15 & 16mm heating pipes.
The plates are designed to fit inside standard 400mm centre to centre joist spacings.
Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Minimum Order: 20 Lengths (8.0m²)
Click Here For: PRODUCT DATA SHEET
18mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
£8.61 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- Low Profile (18mm)
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 4 grooves @ 150mm centres + ‘bulb’ returns with 3 straight runs at the top of each panel for flow and returns
- For 12mm Pipe
Minimum order: 8 Boards
ThermRite™ Fit From Below Aluminium Spreader Plate – 150mm Wide
£4.13 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 2 Pipe Channels – 150mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 150mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: (For Double run between 400mm and Triple run between 600mm centred joists):
5.0 Plates / 1.0m² - Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
Minimum Order: 20 Lengths
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 3 Grooves at 200mm Centres – Accepts Tile or Wood Floors Directly
£8.83 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 3 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum order: 8 Boards
16mm ThermRite™ PRO – PREMIUM OUTPUT 200 Micron Foil – Dual Purpose Foiled Panel – EPS 400 – Accepts Tile or Wood Floors Directly
£9.25 Excluding VATONE PANEL FOR ALL PURPOSES – The Ideal Low Profile Solution for installation of a water system onto existing floors and install tile or wood floors directly on top
High Output 150mm Pipe Centres with Thick 200 micron bonded foil
Features:
- High Strength: 400kpA compressive strength
- High Output: Thick 200 micron aluminium reflective foil covering
- Low Profile: Only 16mm depth for 12mm pipe
- Dual Purpose: For Tile/Wood/Laminate & Vinyl floor finishes
Click for: Product Installation & Data Sheet
Connector Core – Compression Fit
£2.40 Excluding VATThe ideal fitting for conecting our Pex & Pert Pipe to our Underfloor Heating manifolds
-
High quality plated brass construction
-
Stainless Steel Sleeves
-
Double ‘o’ ring secure seal
-
Safe and fast installation.
-
WRAS certified. (UK Certified for use with drinking water installations).
Heatmiser neoStat V2 – Programmable Thermostat
£46.80 Excluding VATA smarter way to control your underfloor heating from anywhere via your smartphone
The neoStat V2 is a 230v powered programmable thermostat and communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.
Click for: Product Installation & Data Sheet
ThermRite™ 25mm Floating Floor Panel – 4 Grooves at 150mm centres – High Output – 1200x600mm
£10.75 Excluding VATUltra Warm Overlay System for Existing Floors
The ideal solution for laying interlocking Wood and Laminate floor finishes directly on top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 4 grooves @ 150mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
HeatBoard ONE MAX PLUS – 2400x600mm – all in one 22mm Foiled & Grooved Chipboard Panel – High Heat Output
£42.50 Excluding VATHigh Output – Easy Lay Foiled Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
Accreditations:
- Chipboard to BS EN 312 / Type P5
Minimum Order: 15 Boards
Click Here For: PRODUCT DATA SHEET
Heatmiser neoAir V3-M Wireless Programmable Smart Thermostat
£48.25 Excluding VATA smarter way to control your underfloor heating from anywhere via your smartphone
The neoAir is ideal for those looking for a totally wire free App controllable solution of your heating & hot water.
Both the UH8-RF and RF Switch receivers are compatible with the neoAir.
Click for: Product Installation & Data Sheet
ThermRite™ 18mm ULTRA LOW Floating Floor Panel – 4 Grooves at 150mm centres – Standard Output – 1200x600mm
£9.95 Excluding VATUltra Low Overlay System for Existing Floors
The ideal solution for laying interlocking Wood and Laminate floor finishes directly on top
Specification:
- Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 4 grooves @ 150mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- Pipe Size: 12mm
ThermRite™ Joisted Floor Insulation Panel – 2 Grooves at 200mm centres
£8.26 – £8.59 Excluding VATBetween Joist Underfloor Heating Panels
Install Between Joist – No Raise In Floor Height
Specification:
- Size: Length- 1200, Width- 350 (Each panel = 0.42m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 2 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum Order 24 Boards (10.0m²)
PROLEVEL FIBRE: Reinforced Flexible Self Levelling Compound
£19.55 Excluding VATHigh Strength Fibre Reinforced, Deep Fill Self Levelling Compound – the ideal solution for Self Levelling over our Profix Panel Systems
Specification:
- 20kg Bag
- Coverage: Standard Levelling: 3mm layer: 1 Bag = 3.9m²
Minimum Order: 10 Bags
Click Here For: PRODUCT DATA SHEET
Profix™ PLUS Panel – 20mm Depth
£7.75 Excluding VATThe ULTRA Warm, Fast Fit Overlay Underfloor Heating System for 16mm pipe.
- High Heat Output
- Self Adhesive
- Interlocking System
- Variable Pipe Spacing Options from 50mm
- Ideally suited to 16mm Pipe
- Low Profile: 20mm
- Panel Size: 1200 x 600mm
Panel Coverage: 0.72m²
Click Here For: PRODUCT DATA SHEET
Heatmiser Sensor Probe
£4.60 Excluding VATRemote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor.
This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Suitable for all Heatmiser Thermostats
