WATER UNDERFLOOR HEATING
Wet underfloor heating is similar to radiators as it uses pipes to carry hot water under your flooring and is efficient so it can reduce your energy bills. We supply water underfloor heating systems and kits which are designed for easy installation and include everything required to get the underfloor heating up and running. We can also design a bespoke system tailored precisely to your needs. The systems are fully guaranteed including a 50-year pipe warranty.
Plastic Pipe Bending Elbow
Pipe Fixing Clip Rail – Self-Adhesive Backing – 1.0 Metre Interlocking Lengths
60mm High Grip Barbed Pipe Clips 100/pack
60mm High Grip Barbed Pipe Clips 100/pack
Specifically designed for installation into rigid insulation boards (such as Kingspan and Celotex).
Clips are 60mm in length and offer high grip due to the barbed construction.
Clips can be used individually and simply pushed into position or alternatively loaded into a pipe clipping tool.
Minimum Order - 2 Packs (200 clips)
Connector Core – Compression Fit
ThermRite™ Aluminium Single Spreader Plate
Aluminium Heat Diffuser Plates - 1 Pipe Channel
Specifically designed to sit between joists to hold pipes and spread the heat in a joisted floor installation. Each plate has 1 channel designed to locate 12 or 16mm heating pipes.Specification:
- Plate Size: 1.0 Metre long x 140mm wide.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
Profix Insulation Board – 3.0mm – 25mm
Optional Insulation Board - designed to insulate below Profix Panels
Dry lay below the Profix panels to add an extra level of insulation.Specification:
- Size: 1200 x 600m
- Coverage: 0.72m² / Board
- Available Thickness, 3.0, 6.0, 10.0, 20.0 & 25.0mm
- High Compressive Strength of 30 Tonnes / m² (300kPa)
- Thermal conductivity = 0.035 W/mK
- Fire Classification = Euroclass E
ThermRite™ Fit From Below Aluminium Single Spreader ‘J’ Plate – 180mm Wide
Fit From Below High Output Aluminium Heat Diffuser Plates - 1 Pipe Channel - 180mm Wide Plate
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. The easy install option to fit your between joist underfloor heating without lifting the floor - designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installationSpecification:
- Plate Size: 1.0 Metre long x 180mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Each plate has 1 channel, designed to locate 16mm heating pipes.
ThermRite™ Fit From Below Aluminium Spreader Plate – 150mm Wide
Fit From Below High Output Aluminium Heat Diffuser Plates - 2 Pipe Channels - 150mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. The easy install option to fit your between joist underfloor heating without lifting the floor - designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installationSpecification:
- Plate Size: 1.0 Metre long x 150mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: (For Double run between 400mm and Triple run between 600mm centred joists): 5.0 Plates / 1.0m²
- Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
ThermRite™ Fit From Below Aluminium Double Spreader Plate – 250mm Wide
Fit From Below High Output Aluminium Heat Diffuser Plates - 2 Pipe Channels - 250mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. The easy install option to fit your between joist underfloor heating without lifting the floor - designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installationSpecification:
- Plate Size: 1.0 Metre long x 250mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: For Single run between 400mm centred joists: 2.5 Plates / 1.0m² For Double run between 600mm centred joists: 3.0 Plates / 1.0m²
- Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
ThermRite™ Aluminium Double Spreader Plate
Aluminium Heat Diffuser Plates - 2 Pipe Channels @ 200mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. Each plate has 2 channels 200mm apart, designed to locate 15 & 16mm heating pipes. The plates are designed to fit inside standard 400mm centre to centre joist spacings.Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Click Here For: PRODUCT DATA SHEET
Pipe Reaming Tool for Pex/Pert Pipe
Professional reaming tool designed to bevel and round pipes in preparation for insertion of pipe fittings.
Insert the end of this tool into the pipe and within a couple of turns the strategically placed blade will bevel the end of the pipe whilst de-burring and rounding, to ensure correct preparation for installation of the pipe fittings.
Ideal for use with our Pex-Al-Pex and Pert-Al-Pert pipes. Essential tool to be used prior to installing fittings.
Select from the options below, a 16mm Reaming Tool, or the multi reamers where each Reaming Tool is suitable for 3 different pipe sizes (except for the ONLY 16mm Pipe Reaming Tool)
Heatmiser Sensor Probe
Remote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats
ThermRite™ Aluminium Triple Spreader Plate
Aluminium Heat Diffuser Plates - 3 Pipe Channels @ 150mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. Each plate has 3 channels 150mm apart, designed to locate 15 & 16mm heating pipes. The plates are designed to fit inside standard 400mm centre to centre joist spacings.Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Click Here For: PRODUCT DATA SHEET
Heatmiser Sensor Probe Housing – EN030
Pump Connection Coupling – Compression Fit (Pack of 2)
Fixing Screws for 6mm Fibre Cement Boards (200 per box)
Screws for fixing ThermRite 6mm Fibre Cement Boards to Routed Chipboard (200x per box)
Approx 48x Screws Per 1200x800 Cement Board (Each Box of 200x ThermRite RTCHIP-CB-Screws Will Cover Approxiomately 4m²)
Click Here For: 6mm FIBRE CEMENT BOARD PRODUCT DATA SHEET
20mm Plastic Castellated Floor Panel for 16mm Pipe
Heatmiser neoAir Stand
ThermRite™ PRO Adhesive – 500ml
ThermRite™ Joisted Floor Insulation Panel – 2 Grooves at 200mm centres
Between Joist Underfloor Heating Panels
Install Between Joist - No Raise In Floor HeightSpecification:
- Size: Length- 1200, Width- 350 (Each panel = 0.42m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 2 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Profix™ PLUS Panel – 20mm Depth
The ULTRA Warm, Fast Fit Overlay Underfloor Heating System for 16mm pipe.
- High Heat Output
- Self Adhesive
- Interlocking System
- Variable Pipe Spacing Options from 50mm
- Ideally suited to 16mm Pipe
- Low Profile: 20mm
- Panel Size: 1200 x 600mm
Click Here For: PRODUCT DATA SHEET
External Bending Springs – 16, 20, 25 & 32mm
Pipe Cutter
ThermRite™ Joisted Floor Insulation Panel – 3 Grooves at 115mm centres
Between Joist Underfloor Heating Panels
Install Between Joist - No Raise In Floor HeightSpecification:
- Size: Length- 1200, Width- 350 (Each panel = 0.42m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 3 grooves @ 115mm centres + lightbulb returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
20mm ThermRite™ PRO – HIGH OUTPUT 100 Micron Foil – Dual Purpose Foiled Panel – EPS 400 – Accepts Tile or Wood Floors Directly
ONE PANEL FOR ALL PURPOSES - The Ideal Low Profile Solution for installation of a water system onto existing floors and install tile or wood floors directly on top
- Thick 100 Micron Bonded Foil
- High Output 150mm Pipe Centres
Features:
- High Strength: 400kpA compressive strength
- High Output: 100 micron aluminium reflective foil covering
- Low Profile: Only 20mm depth for 16mm pipe
- Dual Purpose: For Tile/Wood/Laminate & Vinyl floor finishes
Click for: Product Installation & Data Sheet
18mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
Ultra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on topFeatures:
- Low Profile (18mm)
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
- Construction:XPS - Grade 300 kPa
- Design: 4 grooves @ 150mm centres + 'bulb' returns with 3 straight runs at the top of each panel for flow and returns
- For 12mm Pipe
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 3 Grooves at 200mm Centres – Accepts Tile or Wood Floors Directly
Ultra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on topFeatures:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS - Grade 300 kPa
- Design: 3 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Profix Highway Clip Rail Pack
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
Ultra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on topFeatures:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS - Grade 300 kPa
- Design: 4 grooves @ 150mm centres + 'bulb' returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
20mm ThermRite™ PRO – PREMIUM OUTPUT 200 Micron Foil – Dual Purpose Foiled Panel – EPS 400 – Accepts Tile or Wood Floors Directly
ONE PANEL FOR ALL PURPOSES - The Ideal Low Profile Solution for installation of a water system onto existing floors and install tile or wood floors directly on top
High Output 150mm Pipe Centres with Thick 200 Micron Bonded Foil - Our Highest Output Dual Purpose Insulation Board
Features:
- High Strength: 400kpA compressive strength
- High Output: Thick 200 micron aluminium reflective foil covering
- Low Profile: Only 20mm depth for 16mm pipe
- Dual Purpose: For Tile/Wood/Laminate & Vinyl floor finishes
Click for: Product Installation & Data Sheet
16mm ThermRite™ PRO – PREMIUM OUTPUT 200 Micron Foil – Dual Purpose Foiled Panel – EPS 400 – Accepts Tile or Wood Floors Directly
ONE PANEL FOR ALL PURPOSES - The Ideal Low Profile Solution for installation of a water system onto existing floors and install tile or wood floors directly on top
High Output 150mm Pipe Centres with Thick 200 micron bonded foil
Features:
- High Strength: 400kpA compressive strength
- High Output: Thick 200 micron aluminium reflective foil covering
- Low Profile: Only 16mm depth for 12mm pipe
- Dual Purpose: For Tile/Wood/Laminate & Vinyl floor finishes
Click for: Product Installation & Data Sheet
ThermRite™ 25mm Floating Floor Panel – 3 Grooves at 200mm centres – Standard Output- 1200x600mm
Ultra Warm Overlay System for Existing Floors
The ideal solution for laying interlocking Wood and Laminate floor finishes directly on topSpecification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 3 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
ThermRite™ 18mm ULTRA LOW Floating Floor Panel – 4 Grooves at 150mm centres – Standard Output – 1200x600mm
Ultra Low Overlay System for Existing Floors
The ideal solution for laying interlocking Wood and Laminate floor finishes directly on topSpecification:
- Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 4 grooves @ 150mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- Pipe Size: 12mm
ThermRite™ 18mm ULTRA LOW Floating Floor Panel – 6 Grooves at 100mm centres – Premium Output – 1200x600mm
Ultra Low Overlay System for Existing Floors
The ideal solution for laying interlocking Wood and Laminate floor finishes directly on topSpecification:
- Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 6 grooves @ 100mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- Pipe SIze: 12mm
