Ecofilm Underfloor Heating for Laminate & Wood Floors
ECOFILM Underfloor Heating is designed to heat directly underneath wood and laminate floors and is available in two standard power dissipations: 130 Watts/m2 for internal living areas and a high output 160 Watts/m2 for conservatory installations. ECOFILM can be used in conjunction with ECOMAX-DUO, which makes it suitable for carpet and vinyl floors.
300mm wide Ecofilm Underfloor Heating Element – 160 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m.
The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”. Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
Analogue Room Thermostat – TH131
The TH131 is an electronic thermostat developed for optimal regulation of underfloor heating systems.
The TH131 is a simple to use thermostat. Temperature control is via a simple analogue dial. The thermostat has three modes of operation. Choose between room thermostat, floor thermostat or a combination of room thermostat with floor limit sensor.Click Here For: TH131 Product Manual
Ecofilm Element Kit 0 – 3.0m² @ 130watts/m²
Ecofilm Element Kit 0 – 3.0m² @ 160watts/m²
Ecofilm Pro Kit – 130watts/m² – For wood/laminate floor finishes
ECOFILM PRO is a complete heating solution in a box, for wood, laminate and engineered wood floors
Standard Heat Ouput 130watts/m² Kit Includes:- Roll of 500mm Wide Film
- Heating Element Connection Crimps
- Cold Tail Connection Leads (Brown & Blue)
- Mastic Insulation Tape
- Green Polyester Tape Discs
- Ratchet Crimping Tool
- Full Installation Instructions
- Lifetime Guarantee
Click Here For: PRODUCT INSTALLATION & DATA SHEET
Heatmiser neoStat-e V2 – Electric Floor Heating Thermostat
A smarter way to control your underfloor heating from anywhere via your smartphone
The Heatmiser neoStat-e is our electric floor heating model, capable of switching up to 16A. A 3M remote floor sensor is provided and the neoStat-e can be used alongside all other neoStat models on the same system. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: NeoStat-E V2 Product Manual
Wireless 7 Day Programmable Room Thermostat – V22
The V22 Wireless Programmable Thermostat is designed to provide wireless time and temperature control to heating systems
Wall or Stand mounted (Supplied with stand) The V22 is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
300mm wide Ecofilm Underfloor Heating Element – 130 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m.
The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”. Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
Ecofilm Element Kit 3.1 – 4.0m² @ 130watts/m²
Ecofilm Element Kit 3.1 – 4.0m² @ 160watts/m²
Ecofilm Pro Kit – 160watts/m² – For wood/laminate floor finishes
ECOFILM PRO is a complete heating solution in a box, for wood, laminate and engineered wood floors
High Heat Output 160watts/m² For high heat loss areas such as heavily glazed rooms and poorly insulated properties. Kit Includes:- Roll of 500mm Wide Film
- Heating Element Connection Crimps
- Cold Tail Connection Leads (Brown & Blue)
- Mastic Insulation Tape
- Green Polyester Tape Discs
- Ratchet Crimping Tool
- Full Installation Instructions
- Lifetime Guarantee
Click Here For: PRODUCT INSTALLATION & DATA SHEET
Electric Floor Heating Smart Thermostat Kit – Heatmiser neoKit-E Gen 2 V2
A smarter way to control your underfloor heating from anywhere via your smartphone
The Heatmiser neoKit-e Gen 2 includes 1 neoStat-e V2 and a neoHub Gen 2, allowing you to take control of your heating from anywhere. The Gen 2 neoHub brings HomeKit support to all connected Neo Devices.
Click Here For: NeoStat-e V2 Product Manual
Click Here For: NeoHub Product Manual
High Specification Adhesive Tape
Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3
The Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind
The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat. A 3M remote floor sensor is provided. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Slimline-E V3 Product Manual
Wireless Kit – 7 Day Programmable Room Thermostat and Receiver
This Wireless Thermostat Kit consisting of a Wireless Programmable Thermostat (V22) & a Receiver (V23), is designed to provide wireless time and temperature control to heating systems
Wall or Stand mounted thermostat (Supplied with stand) The V22 is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
500mm wide Ecofilm Underfloor Heating Element – 130 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m. The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”.
Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
500mm wide Ecofilm Underfloor Heating Element – 160 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m.
The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”. Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
Ecofilm Element Kit 4.1 – 5.0m² @ 130watts/m²
Ecofilm Element Kit 4.1 – 5.0m² @ 160watts/m²
Flexel Touch – Electric Floor Heating Thermostat
The new Touch is designed to be the simplest to use electric underfloor heating control available.
The Touch comes packed with innovative features to optimise your comfort and minimise running costs with the simplest touch screen interface. A large full colour backlit touch screen provides simple programming by guiding you through program setup and adjustment - no need for any complicated instruction manual.Click Here For: Flexel Touch Product Manual
Wireless Receiver Unit – V23
The V23 receiver is a Wall mounting receiver, specially designed to control electrical floor heating in combination with either the V22 Thermostat and/or V24 Central Controller.
It is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
1000mm wide Ecofilm Underfloor Heating Element – 130 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m. The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”.
Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g. bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
1000mm wide Ecofilm Underfloor Heating Element – 160 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m.
The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”. Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
6mm Ecomax Lite Insulation – Pack
Electric Underfloor Heating Central Wireless Control System – V24
The V24 Central Control System is a multizone central heating control unit.
V24 consists of a centrally located colour touch screen panel that communicates wirelessly with thermostats (V22) and sensors (V23) throughout your home. The V24 is a central control panel that links with V22 single zone control packs to provide convenient control of your whole house from a central location. The V24 comprises a colour touchscreen panel that wirelessly communicates with V22 thermostats throughout the home.This is a multi-zone controller that is fully scalable up to 24 zones. The V24 WIFI provides the same functions as the V24 central controller but with the ability to be controlled from your Smart Phone, using the intuitive iOS or Android App.
ECOMAX-DUO dual board overlay system
The Ideal solution for underfloor heating below carpets and vinyl
Dimensions - 600mm x 1200mm
Pack contents - 4 base boards & 4 top boards (Pack Coverage: 2.88m2)
ECOMAX-DUO is a dual board overlay system suitable for use over our ECOFILM underfloor heating. It is a dry lay system that creates a free floating sub-floor that is extremely stable and is instantly ready to receive the finished floor covering ECOMAX-DUO provides a smooth stable laying surface onto which most finished floor coverings can be fixed. This enables ECOFILM elements to be used as the underfloor heat source for a variety of floor coverings such as carpet, linoleum and luxury vinyl.Installation of ECOMAX-DUO is quick, clean and simple, the system consists of a baseboard and top board, each with a layer of contact adhesive.
WIFI enabled Electric Underfloor Heating Central Wireless Control System – V24 WIFI
The V24 WIFI Central Control System is a multizone central heating control unit The V24 WIFI provides the same functions as the V24 central controller but with the ability to be controlled from your Smart Phone, using the intuitive iOS or Android App.
V24 consists of a centrally located colour touch screen panel that communicates wirelessly with thermostats (V22) and sensors (V23) throughout your home. The V24 is a central control panel that links with V22 single zone control packs to provide convenient control of your whole house from a central location. The V24 comprises a colour touchscreen panel that wirelessly communicates with V22 thermostats throughout the home. This is a multi-zone controller that is fully scalable up to 24 zones. The V24 Wifi provides the same functions as the V24 central controller but with the ability to be controlled from your Smart Phone, using the intuitive iOS or Android App.HomeKit-Enabled Heatmiser neoHub Gen 2
Heatmiser neoHub is the gateway to the Neo System
The Heatmiser neoHub provides remote control of all neoStat's and neoPlug's from your iOS, Android and Windows 10 device. The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.Click for: Product Installation & Data Sheet
Electric Floor Heating Touchscreen Room Thermostat – Heatmiser Touch-E v2
The Heatmiser Touch-e is our touchscreen electric floor heating thermostat
Our touchscreen electric floor heating model, capable of switching up to 16A and the touchscreen interface makes interacting with the heating system easy. The Touch-e V2 is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Touch-E V2 Product Manual
Electric Floor Heating Touchscreen Room Thermostat – Heatmiser Touch-E Carbon
The Heatmiser Touch-e Carbon is our modern Touchscreen Thermostat designed specifically for electric floor heating
The Heatmiser Touch-e Carbon is our touchscreen programmable electric floor heating model, capable of switching up to 16A. The Touch-e Carbon features a negative Touchscreen LCD and is the ideal choice for those wanting an ultra modern thermostat. The Touch-e Carbon is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Touch-E Carbon Product Manual
Heatmiser Sensor Probe
Remote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats
