ELECTRIC UNDERFLOOR HEATING
The quick and simple to install solution for all tile, stone, wood and laminate floors.
Choose from The Floor Heating Warehouse range of Electric Underfloor Heating kits and products for virtually any flooring material.
Ecofloor Mat & Ecoflex loose cable underfloor heating systems for under ceramic, stone and marble tiles
Ecofilm under floor heating system for wood & laminate floors
In-Screed direct underfloor heating systems for new builds
In-Screed Cable – Plastic Fixing Strip
A moulded plastic fixing strip with cable radius profile fixing.
Available in 500mm lengths which can provide cable spacing of 65mm. Can be mechanically fixed or taped to the subfloor. Cables are then tensioned through the profile strip when laying. An extremely quick and efficient method of cable spacing and laying.Strip Length: 500mm
ThermRite™ Insulation Board – Professional Grade
Optional Insulation Board - designed to insulate below underfloor heating systems
Specification:
- Size: 1200 x 600m
- Coverage: 0.72m² / Board
- Available Thickness, 3.0, 6.0, 10.0, 20.0 & 25.0mm
- High Compressive Strength of 30 Tonnes / m² (300kPa)
- Thermal conductivity = 0.035 W/mK
- Fire Classification = Euroclass E
Heatmiser Sensor Probe
Remote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser ThermostatsHigh Temperature Fixing Tape
ThermRite™ Backer Board – High Strength Insulation
In-Screed Cable – Fixing Clip Pack
Heatmiser Thimble Sensor
Discreet Temperature Monitoring
The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.Click for: Product Installation & Data Sheet
Insulation Fixing Pack
Flexel Sensor Probe
In-Screed Cable – Galvanised Fixing Strip
300mm wide Ecofilm Underfloor Heating Element – 130 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m.
The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”. Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
300mm wide Ecofilm Underfloor Heating Element – 160 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m.
The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”. Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
1.0m² @ 150watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install
Dimensions: Length 2.0m, Width 0.5m
ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.
Simple Peel & Stick Installation - Full Self Adhesive Backing
A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.
The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.FEATURES:
- Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
- Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
- Full adhesive backing - Peel & Stick
- Suitable for tile, stone, slate and marble floor finishes
- Continuous metallic earth screen to ensure electrical safety
- Low build height - Minimal floor height build up
- Suitable for use in wet areas
- EMC Safe
- LIFETIME WARRANTY
Click here for: ThermRite Mat Installation Instructions 150 Watts
500mm wide Ecofilm Underfloor Heating Element – 130 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m. The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”.
Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
500mm wide Ecofilm Underfloor Heating Element – 160 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m.
The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”. Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
1.0m² @ 200watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install
Dimensions: Length 2.0m, Width 0.5m
ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.
Simple Peel & Stick Installation - Full Self Adhesive Backing
A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.
The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.FEATURES:
- Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
- Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
- Full adhesive backing - Peel & Stick
- Suitable for tile, stone, slate and marble floor finishes
- Continuous metallic earth screen to ensure electrical safety
- Low build height - Minimal floor height build up
- Suitable for use in wet areas
- EMC Safe
- LIFETIME WARRANTY
Click here for: ThermRite Mat Installation Instructions 200 Watts
1.5m² @ 150watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install
Dimensions: Length 3.0m, Width 0.5m
ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.
Simple Peel & Stick Installation - Full Self Adhesive Backing
A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.
The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.FEATURES:
- Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
- Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
- Full adhesive backing - Peel & Stick
- Suitable for tile, stone, slate and marble floor finishes
- Continuous metallic earth screen to ensure electrical safety
- Low build height - Minimal floor height build up
- Suitable for use in wet areas
- EMC Safe
- LIFETIME WARRANTY
Click here for: ThermRite Mat Installation Instructions 150 Watts
In-Screed Cable 1.0 – 2.0 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 1.0 m² General Room Heat (160 watts/m² - Room Heating) - 1.3 m² Background Heat (100 watts/m² - Tile Warming) - 2.0 m²- Total Output : 200 Watts
- Length : 13.7 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
ThermRite Heating Cable 1.0 – 1.5 m2 – Dual Core
Total Output: 150 Watts
Length: 12.5 metres
Coverage:
- Optimum Heat (150 watts/m2 - 8cm spacing)- 1.0 m2
- Background Heat (100 watts/m2 - 12cm spacing)- 1.5 m2
Includes:
- HIGH OUTPUT - 12 Watts / Linear Metre
- Dual Core Heating Cable (Requiring connection at only one end)
- Comprehensive Installation Instructions
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
1.5m² @ 200watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install
Dimensions: Length 3.0m, Width 0.5m
ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.
Simple Peel & Stick Installation - Full Self Adhesive Backing
A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.
The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.FEATURES:
- Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
- Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
- Full adhesive backing - Peel & Stick
- Suitable for tile, stone, slate and marble floor finishes
- Continuous metallic earth screen to ensure electrical safety
- Low build height - Minimal floor height build up
- Suitable for use in wet areas
- EMC Safe
- LIFETIME WARRANTY
Click here for: ThermRite Mat Installation Instructions 200 Watts
Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3
The Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind
The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat. A 3M remote floor sensor is provided. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Slimline-E V3 Product Manual
Heatmiser neoPlug – Smart Plug
Expand your Neo System with neoPlug and control your Appliances from Anywhere!
With the Heatmiser neoPlug you can control the appliance manually from the neoApp or you can program switching times via the app that the appliance will follow. With the latest apps for Android, Windows 10 and iOS, users can include the neoPlug in their Geo Location triggers, so the appliance can turn on when you get close to home or when you leave.Click Here For: NeoPlug Data Sheet
In-Screed Cable 1.6 – 3.3 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 1.6 m² General Room Heat (160 watts/m² - Room Heating) - 2.0 m² Background Heat (100 watts/m² - Tile Warming) - 3.3 m²- Total Output : 340 Watts
- Length : 22.0 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
ThermRite Heating Cable 1.5 – 2.25 m2 – Dual Core
Total Output: 225 Watts
Length: 19 metres
Coverage:
- Optimum Heat (150 watts/m2 - 8cm spacing)- 1.5 m2
- Background Heat (100 watts/m2 - 12cm spacing)- 2.25 m2
Includes:
- HIGH OUTPUT - 12 Watts / Linear Metre
- Dual Core Heating Cable (Requiring connection at only one end)
- Comprehensive Installation Instructions
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
Analogue Room Thermostat – TH131
The TH131 is an electronic thermostat developed for optimal regulation of underfloor heating systems.
The TH131 is a simple to use thermostat. Temperature control is via a simple analogue dial. The thermostat has three modes of operation. Choose between room thermostat, floor thermostat or a combination of room thermostat with floor limit sensor.Click Here For: TH131 Product Manual
1000mm wide Ecofilm Underfloor Heating Element – 130 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m. The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”.
Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g. bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
Heatmiser neoStat-hw V2 – Hot Water Programmer
A smarter way to control your hot water from anywhere via your smartphone.
The neoStat-hw V2 is a 230v powered timer and communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.Click for: Product Installation & Data Sheet
Ecoflex Complete Cable Kit
The Complete Underfloor Heating Cable Solution for all rooms
The flexibility of the loose cabling system makes it possible to heat the maximum floor area including hard to reach areas. KIT INCLUDES:- Dual Core Heating Cable (Requiring connection at only one end)
- High Grip Adhesive Fixing Tape
- Floor Primer
- Conduit
- Roller (for easy application of floor primer)
- Comprehensive Installation Instructions
- LIFETIME Guarantee
Click Here For: PRODUCT INSTALLATION & DATA SHEET
1000mm wide Ecofilm Underfloor Heating Element – 160 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m.
The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”. Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
In-Screed Cable 2.1- 4.2 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 2.1 m² General Room Heat (160 watts/m² - Room Heating) - 2.6 m² Background Heat (100 watts/m² - Tile Warming) - 4.2 m²- Total Output : 420 Watts
- Length : 28.0 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
Ecofoil Underfloor Heating Mat — 1.0 m²
WIDTH - 0.5m, - LENGTH - 2.0m, - OUTPUT - 140 watts
Total Coverage - 1.0 m2
ECOFOIL Aluminium Heating Mats are designed for use under laminates which are installed in wet environments like bathrooms and shower rooms. ECOFOIL mats are a combination of heating cable encased in an aluminium foil. The aluminium layer above the heating cable acts as a heat dispersion medium and earthing grid making the product suitable for use in wet areas like bathroom or shower rooms where ECOFILM carbon elements should not be used.INCLUDES - Installation Manual & LIFETIME Guarantee
In-Screed Cable 2.8- 5.5 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 2.8 m² General Room Heat (160 watts/m² - Room Heating) - 3.5 m² Background Heat (100 watts/m² - Tile Warming) - 5.5 m²- Total Output : 550 Watts
- Length : 37.0 metres
- LIFETIME Guarantee