The quick and simple to install solution for all tile & stone floors.

ECOFLOOR Underfloor Heating Mats have a twin conductor cable simplifying installation with a single 3m cold tail connection. Available in 2 standard power dissipations: 160 Watts/m2 mats are suitable for internal applications including kitchens and bathrooms & 200 Watts/m2 mats are available for conservatory use or areas where high heat losses can occur.

ECOFLOOR Underfloor Heating Mats are a combination of a heating cable attached to a fibreglass mesh scrim that makes installation easy. The mat can simply be rolled out onto the floor saving precious time. The mats have double sided tape on the underside so they can easily be fixed to any clean surface.

The ultra-thin solution for all laminate & timber floors

ECOFILM Underfloor Heating Element is specifically designed to heat wood/laminate floors.
Choose from either a complete system designed by us to suit your individaul room requirements, or, design your system and order the individual components you require.
Ecofilm is available in two standard power dissipations: 130 Watts/m2 for internal living areas and a high output 160 Watts/m2 for conservatory installations.

When used in conjunction with ECOMAX-DUO, ECOFILM is suitable for carpet and vinyl floors
Approved to EN60335-2-96 as required by the 17th Edition Wiring Regulations (BS7671:2008)

Suitable for use under ceramic, stone or marble tiles, in internal applications such as kitchens, bathrooms and conservatories.
Cables can be installed on top of suspended timber floors or solid concrete floors.

Choose between cost effective Single Core Cable Kits- slightly longer installation time but superb savings on purchase costs, OR, high quality Dual Core Cable Kits- offering fast and simple installation and connection at only one end.

Kit Includes: Heating Cable - Digital Programmable Thermostat - Floor Sensor Probe - Conduit - Fixing Tape - Cable Spacing Template - Installation Manual - 10 Year Manufacturers Guarantee

ECOFLEX In-Screed Underfloor Heating Cable is a single core cable rated at 15W/lin metre. Used to provide underfloor heating in new build projects in screeded floors. Typically laid directly onto foil backed insulation then covered with a minimum of 50mm sand & cement screed.

On new build projects with screed floors this cable can provide an economical heating solution.

This section contains installation products such as - our range of Underfloor Insulation, RCD Installation Packs, Digital Multimeters for testing, Tape etc.

Available in 4 sizes.
Suitable for all sizes of bathroom mirror.
IP44 Rated
Heaters are manufactured with a self adhesive coating designed to adhere to any mirror.
Resistant to moisture and vibration