Description
Ideal Low Profile Solution for installation of a water system onto existing floors and install tile floors directly on top.
SIMPLE & FAST INSTALL – Fix the panels down using our ThermRite Insulation Fixing Packs or a suitable flexible adhesive.
Click Here For: PRODUCT INSTALLATION & DATA SHEET
ThermRite™ ProTile20 is a Premium Output Cementitious Covered Panel consisting of a high strength XPS 300 kPa rigid insulation board with a thick cementitious layer bonded to the topside of the panel. Designed to provide high heat output and superior compressive strength to tile floor finishes.
-
- High Output: 150mm high heat output pipe spacing
- High Strength: 300kPa compressive strength
- Low Profile: Only 20mm depth
- Floor Finish: For tile floor finishes
For Tile & Vinyl floor finishes, simply bond the panels onto suitable structurally sound existing solid screeds or fixed wooden floor decks (minimum 18mm floor grade plywood) using either our ThermRite Insulation Fixing Packs, or a suitable flexible adhesive. Tiling can be laid directly over the system – we recommend priming the boards with a tiling primer, as well as filling any gaps with flexible tiling adhesive. If laying carpet/vinyl/wooden floor finish, we recommend 10mm levelling compound over the top of panels.
The grooves in the insulation securely retain our 16mm Multilayer pipe in the correct position, eliminating the need for supplementary pipe fixings.
PANEL SIZE: Length 1200, Width 600, Depth 20mm (Each panel = 0.72m²)
CONSTRUCTION: XPS – Grade 300 kPa
DESIGN: 4 grooves @ 150mm centres with 3 straight runs at the top of each panel for flow and returns
COVERAGE: Each panel covers 0.72m² (14 panels cover 10.0m²)