Shop
Heatmiser neoStat V2 – Programmable Thermostat
A smarter way to control your underfloor heating from anywhere via your smartphone
The neoStat V2 is a 230v powered programmable thermostat and communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.Click for: Product Installation & Data Sheet
HeatBoard ONE MAX PLUS – 2400x600mm – all in one 22mm Foiled & Grooved Chipboard Panel – High Heat Output
High Output - Easy Lay Foiled Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
- Chipboard to BS EN 312 / Type P5
Click Here For: PRODUCT DATA SHEET
Heatmiser neoAir V3-M Wireless Programmable Smart Thermostat
A smarter way to control your underfloor heating from anywhere via your smartphone
The neoAir is ideal for those looking for a totally wire free App controllable solution of your heating & hot water. Both the UH8-RF and RF Switch receivers are compatible with the neoAir.Click for: Product Installation & Data Sheet
16mm – PREMIUM PEX-AL-PEX Pipe – WRAS Approved
16mm High Specification multiple layer Pex-Al-Pex pipe
This Pex-AL-Pex 5 layer 16mm pipe outperforms older PEXa & PEXb type pipes in all aspects. Pex-Al-Pex is unrivalled in its suitability for underfloor heating systems.Specification:
- 16mm diameter
- Service temperatures: 40°C - 95°C
- Maximum working pressure: 10bar
- Five-layer composite pipe
- Combines the benefits of both metal and plastic pipes
- Aluminium core prevents the ingress of oxygen
- Flexible yet formstable
- Safe and fast installation
- WRAS certified
- 50 Year Guarantee
Heatmiser neoStat-e V2 – Electric Floor Heating Thermostat
A smarter way to control your underfloor heating from anywhere via your smartphone
The Heatmiser neoStat-e is our electric floor heating model, capable of switching up to 16A. A 3M remote floor sensor is provided and the neoStat-e can be used alongside all other neoStat models on the same system. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: NeoStat-E V2 Product Manual
16mm – Pert-Al-Pert European Standard Multilayer Pipe
High Specification multiple layer Pert-Al-Pert pipe
Ideally Suited For Underfloor Heating Systems
This Pert-AL-Pert 5 layer 16mm pipe outperforms older PEXa & PEXb type pipes in all aspects.Specification:
- 16mm diameter
- Service temperatures: 40°C - 90°C
- Maximum working pressure: 10bar
- Five-layer composite pipe
- Combines the benefits of both metal and plastic pipes
- Aluminium core prevents the ingress of oxygen
- Flexible yet durable
- Safe and fast installation
- 50 Year Guarantee
12mm – Pert-Al-Pert European Standard Multilayer Pipe x 80 Metre Coil
12mm High Specification multiple layer Pert-Al-Pert pipe
Ideally Suited For Underfloor Heating Systems
This Pert-AL-Pert 5 layer 16mm pipe outperforms older PEXa & PEXb type pipes in all aspects.Specification:
- 12mm diameter
- Service temperatures: 40°C - 90°C
- Maximum working pressure: 10bar
- Five-layer composite pipe
- Combines the benefits of both metal and plastic pipes
- Aluminium core prevents the ingress of oxygen
- Flexible yet durable
- Safe and fast installation
- 50 Year Guarantee
Heatmiser 4 Zone Wiring Centre – UH4
Our 4 zone wiring centre for optimum control of your underfloor heating system
The Heatmiser UH4 can be used in conjunction with our mains thermostats. The UH4 provides central switching of up to 4 zones as well as providing an output for a hot water cylinder, the system boiler and pump. When used for underfloor heating, an option is available to use zone 4 as a conventional radiator zone. Up to 6 actuators can be connected to each zone. UH4 Dimensions 384x148x60mmClick for: Product Installation & Data Sheet
Heatmiser neoStat-hw V2 – Hot Water Programmer
A smarter way to control your hot water from anywhere via your smartphone.
The neoStat-hw V2 is a 230v powered timer and communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.Click for: Product Installation & Data Sheet
Heatmiser 8 Zone Wiring Centre – UH8
Our 8 zone wiring centre for optimum control of your underfloor heating system
The Heatmiser UH8 can be used in conjunction with our mains thermostats. The UH8 provides central switching of up to 8 zones as well as providing an output for a hot water cylinder, the system boiler and pump. When used for underfloor heating, an option is available to use zone 8 as a conventional radiator zone. Up to 6 actuators can be connected to each zone. UH8 Dimensions 384x148x60mmClick for: Product Installation & Data Sheet
Heatmiser neoStat 12v V2 – Programmable Thermostat
A smarter way to control your underfloor heating from anywhere via your smartphone
This Heatmiser neoStat is 12v powered and is the ideal upgrade route for those wanting app control and that have existing low voltage cabling installed. neoStat 12v are compatible with our 12v Wiring Centre UH8-N.Click for: Product Installation & Data Sheet
Heatmiser Touchscreen Programmable Thermostat – Touch V2
A Touchscreen Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system.
The Heatmiser Touch v2 is our new 230v powered TouchScreen Thermostat and is the ideal upgrade route for those with an existing mains powered thermostat. The Touch V2 is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution.Click Here For: Touch V2 Product Manual
HeatBoard ULTRA – High Output Grooved Chipboard with Aluminium Plates – 2400x600mm
High Heat Output, Easy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Includes High Output Heat Emitting Aluminium Trays Fitted Into Each Groove to Maximise Heat Ouput
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Aluminium Plates: Each Board Includes 9 x High Output Plates for maximum heat distribution.
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
- Chipboard to BS EN 312 / Type P5
Click Here For: PRODUCT DATA SHEET
PRIME IT: Multi Surface Primer – 5 Litre
Multi Surface Floor & Board Primer - the ideal solution for Priming floors and boards in preperation for bonding down both our ThermRite™ PRO & Solid Floor Insulation panels.
Features:
- Moisture tolerant
- Enhances adhesion
- Reduces pinholing
- Coverage: 200m² at 3:1 dilution
- Size: 5 Litre
- Conforms to CT C35 F6 EN 13813 classification
Click Here For: PRODUCT DATA SHEET
Electric Floor Heating Touchscreen Room Thermostat – Heatmiser Touch-E v2
The Heatmiser Touch-e is our touchscreen electric floor heating thermostat
Our touchscreen electric floor heating model, capable of switching up to 16A and the touchscreen interface makes interacting with the heating system easy. The Touch-e V2 is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Touch-E V2 Product Manual
Heatmiser 6 Zone Compact Wiring Centre – UH6
Our 6 zone compact wiring centre for optimum control of your underfloor heating system
The Heatmiser UH6 is our 6 Zone underfloor heating wiring centre designed to work with our 230v Thermostats. The UH6 wiring centre provides central switching and is therefore ideally situated next to the underfloor heating manifold. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. Up to 4 actuators can be connected to each zone.Features:
- Central wiring for up to 6 zones
- DIN Rail Mounting Option (DIN Rail not included)
- Output for underfloor heating valve and pump activated when any thermostat calls for heat
- Actuator outputs: 230v
- Dimensions (LxHxD) 384x148x60mm
Click for: Product Installation & Data Sheet
Wireless Receiver Unit – V23
The V23 receiver is a Wall mounting receiver, specially designed to control electrical floor heating in combination with either the V22 Thermostat and/or V24 Central Controller.
It is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.Heatmiser Boost – Neo & RF Series Repeater
Heatmiser Touch Carbon Thermostat
A Touchscreen Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system
The Heatmiser Touch Carbon is our 230v powered “All Black” TouchScreen Thermostat featuring a negative Touchscreen LCD and is the ideal choice for those wanting an ultra modern thermostat. The Touch Carbon is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution.Click Here For: Touch Carbon Product Manual
Ecoflex Complete Cable Kit
The Complete Underfloor Heating Cable Solution for all rooms
The flexibility of the loose cabling system makes it possible to heat the maximum floor area including hard to reach areas. KIT INCLUDES:- Dual Core Heating Cable (Requiring connection at only one end)
- High Grip Adhesive Fixing Tape
- Floor Primer
- Conduit
- Roller (for easy application of floor primer)
- Comprehensive Installation Instructions
- LIFETIME Guarantee