Shop
ThermRite™ Insulation Board – Professional Grade
£2.95 – £13.90 Excluding VATOptional Insulation Board – designed to insulate below underfloor heating systems
Specification:
- Size: 1200 x 600m
- Coverage: 0.72m² / Board
- Available Thickness, 3.0, 6.0, 10.0, 20.0 & 25.0mm
- High Compressive Strength of 30 Tonnes / m² (300kPa)
- Thermal conductivity = 0.035 W/mK
- Fire Classification = Euroclass E
Minimum Order: 14 Boards
Electrothermic Manifold Actuator
£11.25 Excluding VATManifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.
Click Here For: Actuator Datasheet
ThermRite™ Backer Board – High Strength Insulation
£5.75 – £13.46 Excluding VATThermRite™ Backer Board is a strong, lightweight, insulated tile backer board developed specifically for use with our undertile heating systems.
- Size : 1250 x 600mm
- Board Coverage : 0.75 m2/board (6 boards = 4.5m2 coverage)
Minimum order: 6 boards
ThermRite™ 25mm Floating Floor Panel – 4 Grooves at 150mm centres – High Output – 1200x600mm
£10.75 Excluding VATUltra Warm Overlay System for Existing Floors
The ideal solution for laying interlocking Wood and Laminate floor finishes directly on top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 4 grooves @ 150mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Profix Insulation Board – 3.0mm – 25mm
£2.95 – £11.75 Excluding VATOptional Insulation Board – designed to insulate below Profix Panels
Dry lay below the Profix panels to add an extra level of insulation.
Specification:
- Size: 1200 x 600m
- Coverage: 0.72m² / Board
- Available Thickness, 3.0, 6.0, 10.0, 20.0 & 25.0mm
- High Compressive Strength of 30 Tonnes / m² (300kPa)
- Thermal conductivity = 0.035 W/mK
- Fire Classification = Euroclass E
Minimum Order: 14 Boards
15mm Plastic Castellated Floor Panel For 12mm Pipe With Self-Adhesive Backing & Screed Holes
£9.95 Excluding VATFast Fit pipe retaining system with accurate pipe spacing
Designed to be screeded over
Specification:
- Low Profile: 15mm
- For 12 mm Pipe
- Optional 50,100,150 & 200mm Pipe Centres
- Panel Size: 1220 x 820 x 15mm (Each Panel = 1.00m²)
ThermRite™ 18mm ULTRA LOW Floating Floor Panel – 6 Grooves at 100mm centres – Premium Output – 1200x600mm
£10.25 Excluding VATUltra Low Overlay System for Existing Floors
The ideal solution for laying interlocking Wood and Laminate floor finishes directly on top
Specification:
- Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 6 grooves @ 100mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- Pipe SIze: 12mm
Heatmiser Thimble Sensor
£11.26 Excluding VATDiscreet Temperature Monitoring
The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly.
Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall.
The thimble sensor can be wired up to 20M away from the room thermostats.
Click for: Product Installation & Data Sheet
External Bending Springs – 16, 20, 25 & 32mm
£7.75 – £11.75 Excluding VATExternal Bending Spring
Professional Bending Springs to assist in the bending of Pex-Al-Pex and Pert-Al-Pert pipes.
Specifically designed to ensure tight, unkinked bends can be formed.
Ideal for use with our Pex-Al-Pex and Pert-Al-Pert pipes.
Insulation Fixing Pack
£11.79 Excluding VATComplete Pack for secure fixing of our Tile Backer Insulation Boards
- 200 x Posidrive Screws 4.0 x 40mm
200 x Galvanised Washers 36mm - Coverage : Up to 11.0m² (14 Boards)
Pump Connection Coupling – Compression Fit with Isolation Valves (Pack of 2)
£20.92 – £33.38 Excluding VATOptional Pump Isolation Valve Pack with Compression Fitting
For direct connection of your copper supply pipes to our Automatic Pump & Temperature control unit.
Pack contains 2 x Fittings
PROPRIMER – 1 Litre: Water Based Acrylic Primer
£10.55 Excluding VATAdvanced Polymer Primer – general use primer for both porous and non-porous surfaces• Can be used on walls or floors
• Designed for both porous and non-porous substrates
• Enhances adhesion and reduces substrate porosity
• Suitable for calcium sulphate screeds
• Suitable for Underfloor heating
• Internal surfaces
• Size: 1 Litre
• Coverage: 11m²
• Lifetime guarantee
Click Here For: PRODUCT DATA SHEET
Crimping Jaws For Manual Pressing Clamp
£11.50 – £14.50 Excluding VAT16, 25 & 32mm Clamp Heads for use with our manual pressing clamp tool.
For crimping of Press Fit fittings onto Pex-Al-Pex & Pert-Al-Pert pipe.
Specifically designed to ensure a solid inpenetrable double seal.
ThermRite™ PRO FD170 Cannister Adhesive Hose
Original price was: £112.50.£11.25Current price is: £11.25. Excluding VATEconomy Spray Gun and Hose
Features:
- 47cm Wand Extension
- Durable/Light Weight Construction
- Includes 9501 Spray Tip
- Accommodates all Interchangeable Unijet Spray Tips
- Fits Easily and Securely to Any Tuskbond Canister and Application Gun
Fixing Screws For 22mm Routed Chipboard (200 per box)
£11.25 Excluding VATScrews for fixing ThermRite Routed Chipboard to Floor Joists (200x per box)
Fixings required at each cross section with the joists below (150mm in from either side of the 600mm width).
Approx 32x Screws Per 2400mmx600mm ChipBoard Panel (Each Box of 200x ThermRite RTCHIP-R-Screws Will Cover Approximately 15m²)
ThermRite™ Insulation Board – Professional Grade – 20mm Thick Board
£11.75 Excluding VATBoard Thickness: 20mm Thick Board
Pump Connection Coupling – Compression Fit with Isolation Valves (Pack of 2) – 22mm Copper – 3/4″ (Pack of 2)
£20.92 Excluding VATSize Options: 22mm Copper – 3/4″ (Pack of 2)
Crimping Jaws For Manual Pressing Clamp – 16mm Crimp Jaws
£11.50 Excluding VATSize Options: 16mm Crimp Jaws
