Shop
Ice Prevention & Snow Melting Cable Mats
In the winter months, serious injury can occur from the formation of ice on work platforms in warehouse loading bays or on entrance walkways to busy public buildings etc. This potential hazard can easily be minimised by installing an ice prevention system.
In the case of snow fall, an ice prevention system will quickly melt any snow that falls providing clear, access for pedestrians and vehicles on pavements and drives.
MPSV heating cables are rated at 20 Watts/m and used for ice and snow melting of outdoor areas and other applications where the cable is embedded in concrete.
The most common application in industry is heating of ramp or loading platforms in factories and warehouses, where an ice prevention system can reduce the risk of accidents and ensure work can be carried out at all times. There are however a variety of applications for ice and snow melting. All these applications can be kept free from ice and snow so heavy salting and snow shovelling are avoided. These include: car parks; garage drive ways; pavements and outdoor steps.
Features:- Approved to IEC 60800
- 300W/m provides clear, safe access for pedestrians and vehicles on pavements and drives.
- Tough & durable heating cable
- Suitable under concrete, paviours and asphalt
- 4.8-5.6mm thick heating cable with UV protective outer insulation
- 230V supply, IP 67 Rated
- Single conductor cable with full screen protection
- Power loading - 300W/m
- 2 x 5m cold connection leads
- Temperature range - -20C up to + 80C
16mm – PREMIUM PEX-AL-PEX Pipe – WRAS Approved
16mm High Specification multiple layer Pex-Al-Pex pipe
This Pex-AL-Pex 5 layer 16mm pipe outperforms older PEXa & PEXb type pipes in all aspects. Pex-Al-Pex is unrivalled in its suitability for underfloor heating systems.Specification:
- 16mm diameter
- Service temperatures: 40°C - 95°C
- Maximum working pressure: 10bar
- Five-layer composite pipe
- Combines the benefits of both metal and plastic pipes
- Aluminium core prevents the ingress of oxygen
- Flexible yet formstable
- Safe and fast installation
- WRAS certified
- 50 Year Guarantee
Ecoflex Complete Cable Kit
The Complete Underfloor Heating Cable Solution for all rooms
The flexibility of the loose cabling system makes it possible to heat the maximum floor area including hard to reach areas. KIT INCLUDES:- Dual Core Heating Cable (Requiring connection at only one end)
- High Grip Adhesive Fixing Tape
- Floor Primer
- Conduit
- Roller (for easy application of floor primer)
- Comprehensive Installation Instructions
- LIFETIME Guarantee
Click Here For: PRODUCT INSTALLATION & DATA SHEET
16mm – Pert-Al-Pert European Standard Multilayer Pipe
High Specification multiple layer Pert-Al-Pert pipe
Ideally Suited For Underfloor Heating Systems
This Pert-AL-Pert 5 layer 16mm pipe outperforms older PEXa & PEXb type pipes in all aspects.Specification:
- 16mm diameter
- Service temperatures: 40°C - 90°C
- Maximum working pressure: 10bar
- Five-layer composite pipe
- Combines the benefits of both metal and plastic pipes
- Aluminium core prevents the ingress of oxygen
- Flexible yet durable
- Safe and fast installation
- 50 Year Guarantee
PREMIUM Manifold System – with Auto Air Vents and Temperature Gauges
Premium Stainless Steel, ThermRite™ Dualmix Manifold Assembly with Automatic Air Vents and Temperature Gauges
- Pre-Assembled onto brackets for easy install
- Supplied complete with pipe connector cores
Click Here For: PRODUCT DATA SHEET
Manifold Assembly Includes:
- Pre-Assmbled onto brackets for easy install
- 2 x Manifold body (flow and return)
- Lockshields with flow meters on each port (0-5 l/min)
- 2 x Isolation ball valves with temp gauge
- Manual adjustment valves on each port (interchangeable to actuators)
- 2 x Water drain/fill valves with blank cap
- 2 x Automatic air vent with manual bleed
- 2 x Metal fixing brackets
- Pipe connectors (Eurocone Pipe Connectors)
- Installation manual
Standard Manifold System – with Manual Air Vents
Premium Stainless Steel, ThermRite™ Dualmix Manifold Assembly with Manual Air Vents
- Pre-Assembled onto brackets for easy install
- Supplied complete with pipe connector cores
Click Here For: PRODUCT DATA SHEET
Manifold Assembly Includes:
- 2 x Manifold body (flow and return)
- Lockshields with flow meters on each port (0-5 l/min)
- 2 x Isolation ball valves
- Manual adjustment valves on each port (interchangeable to actuators)
- 2 x Water drain/fill valves with blank cap
- 2 x Manual air vents
- 2 x Metal fixing brackets
- Pipe connectors (Eurocone Pipe Connectors)
- Installation manual
1000mm wide Ecofilm Underfloor Heating Element – 160 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m.
The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”. Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
1000mm wide Ecofilm Underfloor Heating Element – 130 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m. The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”.
Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g. bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
Infrared Ceiling Cassettes
The new ECOSUN C+ IP55 units are direct replacements for our original ECOSUN C+ IP20 units as an upgrade for 2020.
Our UK manufactured radiant ceiling cassette panels are designed to replace standard 600mm x 600mm UK celling tiles in offices, corridors, toilets, canteens, classrooms and any other location with low ceiling grid system and tiles in place.
Ideal for complete or supplemental heating in commercial, residential and public buildings. Infrared heaters provide clean, gentle, comfortable heat that is ideal for providing focused heat directly to you. This mans you use less energy over other systems by heating people and objects rather than the all the air in a room.
6mm Ecomax Lite Insulation – Pack
Desk or Pew Heater EcoSun K+
The EcoSun K+ is a great choice for heating desks or churches with fixed pews in place.
The radiant heating panel fits to the front panel of a pew or desk. It is designed to heating people in the immediate vicinity. Each panel can be operated independently, which keeps heating costs to a minimum.
The radiant heaters also provide almost instantaneous heat, so the panels can be switched on just moments before the congregation or staff arrive. EcoSun K+ panels are extremely unobtrusive. They are painted dark brown and when fitted to the front or a traditional pew or desk, they are barely noticeable. FEATURES:- Localised heating – heat only the areas required
- Maintenance free
- Lightweight for easy installtion
- 100W, 200W, 270W, 330W and 400W outputs available
