Shop
ThermRite™ Fit From Below Aluminium Single Spreader ‘J’ Plate – 180mm Wide
Fit From Below High Output Aluminium Heat Diffuser Plates - 1 Pipe Channel - 180mm Wide Plate
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. The easy install option to fit your between joist underfloor heating without lifting the floor - designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installationSpecification:
- Plate Size: 1.0 Metre long x 180mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Each plate has 1 channel, designed to locate 16mm heating pipes.
ThermRite™ Aluminium Single Spreader Plate
Aluminium Heat Diffuser Plates - 1 Pipe Channel
Specifically designed to sit between joists to hold pipes and spread the heat in a joisted floor installation. Each plate has 1 channel designed to locate 12 or 16mm heating pipes.Specification:
- Plate Size: 1.0 Metre long x 140mm wide.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
HeatBoard ULTRA – High Output Grooved Chipboard with Aluminium Plates – 2400x600mm
High Heat Output, Easy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Includes High Output Heat Emitting Aluminium Trays Fitted Into Each Groove to Maximise Heat Ouput
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Aluminium Plates: Each Board Includes 9 x High Output Plates for maximum heat distribution.
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
- Chipboard to BS EN 312 / Type P5
Click Here For: PRODUCT DATA SHEET
Pressure Test Pump Unit
- Working Pressure: 0-50 Bar
- Lockable Arm
- Stainless Steel Water Tank
- Durable Aluminium Frame
- Flow Volume: 45ML
- Tank Volume: 3.0 Gallon Fluid Tank – 726PSI (5 Mpa)
- Double running needle valves ensure good operation
- 1/4″ x 53″ Hose
- Outlet Connection: 1/2″ Female NPT - Compatible with our 1/2" Compression Male Fittings found HERE
Click Here For: PRODUCT DATA SHEET
Plastic Pipe Bending Elbow
ThermRite Heating Cable 4.0 – 6.0 m2 – Dual Core
Total Output: 600 Watts
Length: 50 metres
Coverage:
- Optimum Heat (150 watts/m2 - 8cm spacing)- 4.0 m2
- Background Heat (100 watts/m2 - 12cm spacing)- 6.0 m2
Includes:
- HIGH OUTPUT - 12 Watts / Linear Metre
- Dual Core Heating Cable (Requiring connection at only one end)
- Comprehensive Installation Instructions
- LIFETIME Guarantee
