Shop
15mm Plastic Castellated Floor Panel For 12mm Pipe With Self-Adhesive Backing & Screed Holes
16mm – 1/2″ Wall Plated Female Elbow – Crimp Fit
20mm Plastic Castellated Floor Panel for 16mm Pipe
3/4″ to 1/2″ Brass Manifold with Ball Valves – 4 Port
4 Port Manifold ideal for connection of all hot and cold services in Bathrooms & Utility Rooms
- 3/4" manifold with 1/2" ports
- Valves allow each circuit to be isolated
- High quality brass construction
- Nickel Plated
- Safe and fast installation.
- WRAS certified. (UK Certified for use with drinking water installations)
300mm wide Ecofilm Underfloor Heating Element – 160 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m.
The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”. Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
60mm High Grip Barbed Pipe Clips 100/pack
60mm High Grip Barbed Pipe Clips 100/pack
Specifically designed for installation into rigid insulation boards (such as Kingspan and Celotex).
Clips are 60mm in length and offer high grip due to the barbed construction.
Clips can be used individually and simply pushed into position or alternatively loaded into a pipe clipping tool.
Minimum Order - 2 Packs (200 clips)
Analogue Room Thermostat – E3521
Bespoke Warm Water System
Click here to:
All bespoke systems are designed to the highest specification. For this reason, we will request a few pieces of information from you including:
- Scale floor plans
- Elevations
- Floor construction details
Once you submit your details one of our team will contact you at the earliest opportunity to discuss your requirements and plans.
Compression Fit to Copper Adaptors
Crimp Fit to Brass Tail Adaptors
The ideal fitting for connecting Pex-Al-Pex Pipe to Copper pipe.
Pex (Pressfit) to Copper (Compression) Adaptors
-
High quality plated brass construction
-
Stainless Steel Sleeves
-
Double 'o' ring secure seal
-
Safe and fast installation.
-
WRAS certified. (UK Certified for use with drinking water installations).
Crimp Fit to Copper Compression Adaptors
The ideal fitting for connecting Pex-Al-Pex Pipe to Copper pipe.
Pex (Pressfit) to Copper (Compression) Adaptors
-
High quality plated brass construction
-
Stainless Steel Sleeves
-
Double 'o' ring secure seal
-
Safe and fast installation.
-
WRAS certified. (UK Certified for use with drinking water installations).
End Cap – COMPRESSION FIT
End Cap – Crimp Fit
Equal Elbows – Crimp Fit
Equal Straight Connector – COMPRESSION FIT
EQUAL Straight Union – Crimp Fit
EQUAL TEE – Crimp Fit
Female Straight Union – Crimp Fit
Heatmiser Dial Thermostat – DS1 V2
A Dial Type Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS1 is our 230v, electronic room thermostat, ideal for conventional or combi-boiler systems. Includes Optional Remote Air Sensing ModeClick Here For: DS1 V2 Product Manual
High Performance FLAT (Non Routed) Dry Screed Overlay Cement Boards for underfloor heating
The ideal product for use directly onto our Grooved Insulation Boards to enable tiling on top.
Tongue and Groove interlocking glued joints - No screws requiredSpecification:
- Board Height: 18mm
- Board Size: 1200 x 600mm
- Board Coverage: 0.72m²
Features:
- Very low thermal resistance (0.045m /kW)
- High thermal conductivity (0.40W/mK)
- Low thermal expansion
- Only 18mm thick
- Doesn't contract or expand like chipboard when exposed to water
- High impact resistance
- Tongue & groove edge detail - no screws required
- Quick and easy to install
- Accepts ceramic tiles
Male Elbows – Crimp Fit
Mirror Heating Pads
Mirror pads are the simple and safe answer to steamed up mirrors in wet areas such as bathrooms, shower rooms and en-suites.
The self adhesive pads are easy to install and behind existing and new mirrors. Simply integrate the pad into the lighting circuit, so it only switches on when you need it. For larger mirrors, multiple pads can be used together.- Very low energy consumption
- Self adhesive, easy to install
- Can be used in multiples for larger areas
- Ultra-slim pad fits behind new or existing mirrors
- Integrate into the lighting circuit for automatic operation
TECHNICAL DETAILS
- IP44 rated
- Operating voltage: 230V, 50Hz
- Class II connection
- CE marked
- 1m mains connection lead