Overlay Systems, Insulation & Cement Boards
ThermRite™ Aluminium Single Spreader Plate
£2.59 Excluding VATAluminium Heat Diffuser Plates – 1 Pipe Channel
Specifically designed to sit between joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 1 channel designed to locate 12 or 16mm heating pipes.
Specification:
- Plate Size: 1.0 Metre long x 140mm wide.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
Minimum Order: 35 Lengths
ThermRite™ PRO Adhesive – 500ml
£6.99 Excluding VATHigh Performace Contact Adhesive – Specifically designed and approved for use with our ThermRite PRO EPS Panels
Features:
- Easy-Application
- Fast-Drying
- Non-Chlorinated
- Extremely Tacky
- High Solids Formulation
- Long Open-Time
- Coverage: 1 Can = 5.0m²
Fixing Screws For 22mm Routed Chipboard (200 per box)
£11.25 Excluding VATScrews for fixing ThermRite Routed Chipboard to Floor Joists (200x per box)
Fixings required at each cross section with the joists below (150mm in from either side of the 600mm width).
Approx 32x Screws Per 2400mmx600mm ChipBoard Panel (Each Box of 200x ThermRite RTCHIP-R-Screws Will Cover Approximately 15m²)
Profix PE Edge Insulation
£30.50 Excluding VATEdge Insulation Roll for Profix Systems
- Size: Width 50mm, Thickness 5.0mm, Length 50 metres
- Self adhesive backing
ThermRite™ Aluminium Double Spreader Plate
£4.35 Excluding VATAluminium Heat Diffuser Plates – 2 Pipe Channels @ 200mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 2 channels 200mm apart, designed to locate 15 & 16mm heating pipes.
The plates are designed to fit inside standard 400mm centre to centre joist spacings.
Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Minimum Order: 20 Lengths (8.0m²)
Click Here For: PRODUCT DATA SHEET
ThermRite HeatBoard Co-Polymer Adhesive – 25 Litre Drum
£251.95 Excluding VATThermRite HeatBoard Co-Polymer adhesive for bonding porous (Wood / Cement board) and non-porous (aluminium foil) substrates together (125m2 approx.)
The Ideal Solution for Bonding Plywood or 6mm ThermRite Fibre Cement Boards to ThermRite HeatBoard ONE Panels
Note: This adhesive is only designed for use over our 22mm routed chipboard systems
ThermRite™ Aluminium Triple Spreader Plate
£4.99 Excluding VATAluminium Heat Diffuser Plates – 3 Pipe Channels @ 150mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 3 channels 150mm apart, designed to locate 15 & 16mm heating pipes.
The plates are designed to fit inside standard 400mm centre to centre joist spacings.
Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Minimum Order: 20 Lengths (8.0m²)
Click Here For: PRODUCT DATA SHEET
ThermRite™ Fit From Below Aluminium Double Spreader Plate – 250mm Wide
£3.95 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 2 Pipe Channels – 250mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 250mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: For Single run between 400mm centred joists: 2.5 Plates / 1.0m²
For Double run between 600mm centred joists: 3.0 Plates / 1.0m² - Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
Minimum Order: 20 Lengths
ThermRite™ Fit From Below Aluminium Spreader Plate – 150mm Wide
£3.95 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 2 Pipe Channels – 150mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 150mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: (For Double run between 400mm and Triple run between 600mm centred joists):
5.0 Plates / 1.0m² - Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
Minimum Order: 20 Lengths
ThermRite™ Fit From Below Aluminium Single Spreader ‘J’ Plate – 180mm Wide
£3.50 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 1 Pipe Channel – 180mm Wide Plate
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 180mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Each plate has 1 channel, designed to locate 16mm heating pipes.
Minimum Order: 30 Lengths
