Showing all 3 results

Show sidebar
Show 9 24 36
Filters
Clear filters

HeatBoard ONE – 1200x600mm – Easy Lay – all in one 22mm Grooved Chipboard Panel

£18.85 Excluding VAT

Easy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors

Features:

  • 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
  • Floor Board & Underfloor Heating Combined Panel

CLICK HERE FOR: ThermRite 6mm Fibre Cement Cover Boards

Specification:

  • Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
  • Dimensions: Width 600mm, Length: 1200mm, Height: 22mm
  • Board Coverage: 0.72m²
  • Weight: 10 Kg Per Panel
  • Fire Protection: BS EN 13501-1 Class D
  • Nominal Density: 660-690 kg/m³
  • Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
  • Recycled Content: 80%
  • Thermal Conductivity: 0.14W/mK
Accreditations: 
  • Chipboard to BS EN 312 / Type P5
Minimum Order: 22 Boards

Click Here For: PRODUCT DATA SHEET

Add to basket
Quick view
New

ThermRite 6mm Fibre Cement Cover Boards For HeatBoard ONE Panels

£13.45 Excluding VAT

ThermRite 6mm Fibre Cement Cover Boards are high strength, water resistant cement fibre boards used as the covering layer over our HeatBoard ONE routed chipboard underfloor heating systems.

Features:

  • Strengthen the surface of the routed carrier board, whilst also offering excellent and even heat transfer to the surfaces above.
  • Allow for ceramic and porcelain tiles to be laid directly over the surface after installation.
  • Excellent Water Resistance
  • High Compressive Strength and Impact Resistance 
  • Easy to Install
  • Mould Resistant

Specification:

  • Dimensions: Width 800mm, Length: 1200mm, Height: 6mm
  • Board Coverage: 0.96m²
  • Weight: 9 Kg Per Panel
  • Thermal Conductivity: 0.19 W/mK
  • Thermal Resistance: 0.039m² K/W
Accreditations: 
  • Warm Water Resistance: Pass EN12467
  • Freeze/Thaw Resistance: Pass EN12467
  • Soak/Dry Resistance: Pass EN12467
Minimum Order: 15 Boards

Click Here For: PRODUCT DATA SHEET

Add to basket
Quick view
New

ThermRite Screws For Fixing ThermRite Routed Chipboard To Floor Joists (200x per box)

£11.25 Excluding VAT
Screws for fixing ThermRite Routed Chipboard to Floor Joists (200x per box) Fixings required at each cross section with the joists below (150mm in from either side of the 600mm width). Approx 32x Screws Per 2400mmx600mm ChipBoard Panel (Each Box of 200x ThermRite RTCHIP-R-Screws Will Cover Approximately 15m²)
Add to basket
Quick view