Overlay Systems, Insulation & Cement Boards
ThermRite™ Aluminium Double Spreader Plate
£4.35 Excluding VATAluminium Heat Diffuser Plates – 2 Pipe Channels @ 200mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 2 channels 200mm apart, designed to locate 15 & 16mm heating pipes.
The plates are designed to fit inside standard 400mm centre to centre joist spacings.
Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Minimum Order: 20 Lengths (8.0m²)
Click Here For: PRODUCT DATA SHEET
ThermRite™ Fit From Below Aluminium Double Spreader Plate – 250mm Wide
£4.13 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 2 Pipe Channels – 250mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 250mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: For Single run between 400mm centred joists: 2.5 Plates / 1.0m²
For Double run between 600mm centred joists: 3.0 Plates / 1.0m² - Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
Minimum Order: 20 Lengths
20mm Plastic Castellated Floor Panel for 16mm Pipe
£6.25 Excluding VATFast Fit pipe retaining system with accurate pipe spacing
Designed to be screeded over
Specification:
- Low Profile: 20mm
- For 15 & 16mm Pipe
- Optional 50,100,150 & 200mm Pipe Centres
- Panel Size: 1220 x 820 x 20mm (Each Panel = 1.00m²)
HeatBoard ONE MAX – 2400x600mm – all in one 22mm Grooved Chipboard Panel
£36.90 Excluding VATEasy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
Accreditations:
- Chipboard to BS EN 312 / Type P5
Minimum Order: 15 Boards
Click Here For: PRODUCT DATA SHEET
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
£9.17 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 4 grooves @ 150mm centres + ‘bulb’ returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum order: 8 Boards
ThermRite™ Aluminium Triple Spreader Plate
£4.99 Excluding VATAluminium Heat Diffuser Plates – 3 Pipe Channels @ 150mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 3 channels 150mm apart, designed to locate 15 & 16mm heating pipes.
The plates are designed to fit inside standard 400mm centre to centre joist spacings.
Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Minimum Order: 20 Lengths (8.0m²)
Click Here For: PRODUCT DATA SHEET
18mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
£8.61 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- Low Profile (18mm)
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 4 grooves @ 150mm centres + ‘bulb’ returns with 3 straight runs at the top of each panel for flow and returns
- For 12mm Pipe
Minimum order: 8 Boards
ThermRite™ Fit From Below Aluminium Spreader Plate – 150mm Wide
£4.13 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 2 Pipe Channels – 150mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 150mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: (For Double run between 400mm and Triple run between 600mm centred joists):
5.0 Plates / 1.0m² - Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
Minimum Order: 20 Lengths