Overlay Systems, Insulation & Cement Boards
Fixing Screws For 22mm Routed Chipboard (200 per box)
£11.25 Excluding VATScrews for fixing ThermRite Routed Chipboard to Floor Joists (200x per box)
Fixings required at each cross section with the joists below (150mm in from either side of the 600mm width).
Approx 32x Screws Per 2400mmx600mm ChipBoard Panel (Each Box of 200x ThermRite RTCHIP-R-Screws Will Cover Approximately 15m²)
ThermRite HeatBoard Co-Polymer Adhesive – 25 Litre Drum
£251.95 Excluding VATThermRite HeatBoard Co-Polymer adhesive for bonding porous (Wood / Cement board) and non-porous (aluminium foil) substrates together (125m2 approx.)
The Ideal Solution for Bonding Plywood or 6mm ThermRite Fibre Cement Boards to ThermRite HeatBoard ONE Panels
Note: This adhesive is only designed for use over our 22mm routed chipboard systems
Fixing Screws for 6mm Fibre Cement Boards (200 per box)
£5.95 Excluding VATScrews for fixing ThermRite 6mm Fibre Cement Boards to Routed Chipboard (200x per box)
Approx 48x Screws Per 1200×800 Cement Board (Each Box of 200x ThermRite RTCHIP-CB-Screws Will Cover Approxiomately 4m²)
Click Here For: 6mm FIBRE CEMENT BOARD PRODUCT DATA SHEET
ThermRite 6mm Fibre Cement Cover Boards For HeatBoard ONE Panels
£13.45 Excluding VATThermRite 6mm Fibre Cement Cover Boards are high strength, water resistant cement fibre boards used as the covering layer over our HeatBoard ONE routed chipboard underfloor heating systems.
Features:
- Strengthen the surface of the routed carrier board, whilst also offering excellent and even heat transfer to the surfaces above.
- Allow for ceramic and porcelain tiles to be laid directly over the surface after installation.
- Excellent Water Resistance
- High Compressive Strength and Impact Resistance
- Easy to Install
- Mould Resistant
Specification:
- Dimensions: Width 800mm, Length: 1200mm, Height: 6mm
- Board Coverage: 0.96m²
- Weight: 9 Kg Per Panel
- Thermal Conductivity: 0.19 W/mK
- Thermal Resistance: 0.039m² K/W
Accreditations:
- Warm Water Resistance: Pass EN12467
- Freeze/Thaw Resistance: Pass EN12467
- Soak/Dry Resistance: Pass EN12467
Minimum Order: 15 Boards
Click Here For: PRODUCT DATA SHEET
20mm ThermRite™ PRO – HIGH OUTPUT 100 Micron Foil – Dual Purpose Foiled Panel – EPS 400 – Accepts Tile or Wood Floors Directly
£8.56 Excluding VATONE PANEL FOR ALL PURPOSES – The Ideal Low Profile Solution for installation of a water system onto existing floors and install tile or wood floors directly on top
– Thick 100 Micron Bonded Foil
– High Output 150mm Pipe Centres
Features:
- High Strength: 400kpA compressive strength
- High Output: 100 micron aluminium reflective foil covering
- Low Profile: Only 20mm depth for 16mm pipe
- Dual Purpose: For Tile/Wood/Laminate & Vinyl floor finishes
Click for: Product Installation & Data Sheet
10.0m² ThermRite™ HeatBoard ULTRA 2400mm Grooved & Plated Chipboard System
£813.98 Excluding VATHigh Output, Easy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels
- Floor Board & Underfloor Heating Integrated Onto One Panel
- Aluminium Heat Diffusion Plates Within Grooves For Pipe
- Includes Pipe Layout
System Includes:
- 7 x ThermRite™ Heatboard ULTRA Panels
- 63 x ThermRite Single Groove Aluminium Heat Diffusion Plates
- A Rated Grundfos Pump and Mixing Valve
- 2 Port Dualmix Manifold & Connectors
- 12mm High Specification 5 Layer Pert-Al-Pert pipe x 80 metres
- Digital Programmable Thermostat
- Pipe Cutters
- Pipe Reaming Tool
Click Here For: PRODUCT DATA SHEET
ThermRite™ Fit From Below Aluminium Single Spreader ‘J’ Plate – 180mm Wide
£3.50 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 1 Pipe Channel – 180mm Wide Plate
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 180mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Each plate has 1 channel, designed to locate 16mm heating pipes.
Minimum Order: 30 Lengths
ThermRite™ Aluminium Single Spreader Plate
£2.59 Excluding VATAluminium Heat Diffuser Plates – 1 Pipe Channel
Specifically designed to sit between joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 1 channel designed to locate 12 or 16mm heating pipes.
Specification:
- Plate Size: 1.0 Metre long x 140mm wide.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
Minimum Order: 35 Lengths
HeatBoard ULTRA – High Output Grooved Chipboard with Aluminium Plates – 2400x600mm
£53.95 Excluding VATHigh Heat Output, Easy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Includes High Output Heat Emitting Aluminium Trays Fitted Into Each Groove to Maximise Heat Ouput
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Aluminium Plates: Each Board Includes 9 x High Output Plates for maximum heat distribution.
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
Accreditations:
- Chipboard to BS EN 312 / Type P5
Minimum Order: 15 Boards
