WATER UNDERFLOOR HEATING
Pipe Cutter
£7.95 Excluding VAT10 To 32mm Ratchet Pipe Cutter
Professional ratchet action pipe cutter for fast and simple cutting of Pex and Pert pipes.
Specifically designed to ensure clean, square pipe cuts and speed up installation.
Ideal for use with our Pex-Al-Pex and Pert-Al-Pert pipes.
ThermRite™ Joisted Floor Insulation Panel – 3 Grooves at 115mm centres
£8.54 – £9.36 Excluding VATBetween Joist Underfloor Heating Panels
Install Between Joist – No Raise In Floor Height
Specification:
- Size: Length- 1200, Width- 350 (Each panel = 0.42m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 3 grooves @ 115mm centres + lightbulb returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum Order 24 Boards (10.0m²)
18mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
£8.61 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- Low Profile (18mm)
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 4 grooves @ 150mm centres + ‘bulb’ returns with 3 straight runs at the top of each panel for flow and returns
- For 12mm Pipe
Minimum order: 8 Boards
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 3 Grooves at 200mm Centres – Accepts Tile or Wood Floors Directly
£8.83 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 3 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum order: 8 Boards
Profix Highway Clip Rail Pack
£8.95 Excluding VATA purpose-made clip-rail for use with the Profix™ Low Profile Screed System
- Length 200m, Width 50mm, Height 15mm (each rail)
- Pack Quantity: 10 Rails
- Suitable for 10 & 12mm Pipe
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
£9.17 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 4 grooves @ 150mm centres + ‘bulb’ returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum order: 8 Boards
15mm Plastic Castellated Floor Panel For 12mm Pipe With Self-Adhesive Backing & Screed Holes
£10.25 Excluding VATFast Fit pipe retaining system with accurate pipe spacing
Designed to be screeded over
Specification:
- Low Profile: 15mm
- For 12 mm Pipe
- Optional 50,100,150 & 200mm Pipe Centres
- Panel Size: 1220 x 820 x 15mm (Each Panel = 1.00m²)
Electrothermic Manifold Actuator
£11.25 Excluding VATManifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.
Click Here For: Actuator Datasheet
Fixing Screws For 22mm Routed Chipboard (200 per box)
£11.25 Excluding VATScrews for fixing ThermRite Routed Chipboard to Floor Joists (200x per box)
Fixings required at each cross section with the joists below (150mm in from either side of the 600mm width).
Approx 32x Screws Per 2400mmx600mm ChipBoard Panel (Each Box of 200x ThermRite RTCHIP-R-Screws Will Cover Approximately 15m²)
Heatmiser Thimble Sensor
£11.26 Excluding VATDiscreet Temperature Monitoring
The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly.
Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall.
The thimble sensor can be wired up to 20M away from the room thermostats.
Click for: Product Installation & Data Sheet
Crimping Jaws For Manual Pressing Clamp
£11.50 – £14.50 Excluding VAT16, 25 & 32mm Clamp Heads for use with our manual pressing clamp tool.
For crimping of Press Fit fittings onto Pex-Al-Pex & Pert-Al-Pert pipe.
Specifically designed to ensure a solid inpenetrable double seal.
Pump Connection Coupling – Compression Fit with Isolation Valves (Pack of 2)
£20.92 – £33.38 Excluding VATOptional Pump Isolation Valve Pack with Compression Fitting
For direct connection of your copper supply pipes to our Automatic Pump & Temperature control unit.
Pack contains 2 x Fittings
Heatmiser Wireless Air Sensor
£12.25 Excluding VATA Wireless Air Sensor for optimum control of your heating system
The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required.
The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.
Click Here For: Wireless Air Sensor Datasheet
ThermRite 6mm Fibre Cement Cover Boards For HeatBoard ONE Panels
£13.45 Excluding VATThermRite 6mm Fibre Cement Cover Boards are high strength, water resistant cement fibre boards used as the covering layer over our HeatBoard ONE routed chipboard underfloor heating systems.
Features:
- Strengthen the surface of the routed carrier board, whilst also offering excellent and even heat transfer to the surfaces above.
- Allow for ceramic and porcelain tiles to be laid directly over the surface after installation.
- Excellent Water Resistance
- High Compressive Strength and Impact Resistance
- Easy to Install
- Mould Resistant
Specification:
- Dimensions: Width 800mm, Length: 1200mm, Height: 6mm
- Board Coverage: 0.96m²
- Weight: 9 Kg Per Panel
- Thermal Conductivity: 0.19 W/mK
- Thermal Resistance: 0.039m² K/W
Accreditations:
- Warm Water Resistance: Pass EN12467
- Freeze/Thaw Resistance: Pass EN12467
- Soak/Dry Resistance: Pass EN12467
Minimum Order: 15 Boards
Click Here For: PRODUCT DATA SHEET
ThermRite™ Routed Dry Screed Overlay Boards (Plain Edge) with Straight Runs (no turns)
£14.29 Excluding VATLow Profile, High Strength, Grooved Cement Boards to enable tiling directly on top.
Plain Edge Profile
Specification:
- Board Height: 18mm
- Board Size: 800 x 600mm
- Grooves: 4 @ 150mm Centres for 12mm pipe
- Board Coverage: 0.42m²
Features:
- Very low thermal resistance (0.045m /kW)
- High thermal conductivity (0.40W/mK)
- Low thermal expansion
- Only 18mm thick
- Doesn’t contract or expand like chipboard when exposed to water
- High impact resistance
- Plain Edge Profile
- Quick and easy to install
- Accepts ceramic tiles
Minimum Order: 10 Boards (4.2m²)
Heatmiser Dial Thermostat – DS1 V2
£14.99 Excluding VATA Dial Type Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS1 is our 230v, electronic room thermostat, ideal for conventional or combi-boiler systems.
Includes Optional Remote Air Sensing Mode
Click Here For: DS1 V2 Product Manual
Heatmiser Wireless Window/Door Switch
£15.20 Excluding VATA Wireless Window/Door Sensor for optimum control of your heating system
The Wireless Window / Door Sensor can be used with the Touch V2, Edge and Neo System and and is used to switch the heating off whenever a window or door is opened.
The Wireless Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.