WATER UNDERFLOOR HEATING
ThermRite™ Aluminium Triple Spreader Plate
£4.99 Excluding VATAluminium Heat Diffuser Plates – 3 Pipe Channels @ 150mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
Each plate has 3 channels 150mm apart, designed to locate 15 & 16mm heating pipes.
The plates are designed to fit inside standard 400mm centre to centre joist spacings.
Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Minimum Order: 20 Lengths (8.0m²)
Click Here For: PRODUCT DATA SHEET
18mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
£8.61 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- Low Profile (18mm)
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 4 grooves @ 150mm centres + ‘bulb’ returns with 3 straight runs at the top of each panel for flow and returns
- For 12mm Pipe
Minimum order: 8 Boards
ThermRite™ Fit From Below Aluminium Spreader Plate – 150mm Wide
£4.13 Excluding VATFit From Below High Output Aluminium Heat Diffuser Plates – 2 Pipe Channels – 150mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation.
The easy install option to fit your between joist underfloor heating without lifting the floor – designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation
Specification:
- Plate Size: 1.0 Metre long x 150mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: (For Double run between 400mm and Triple run between 600mm centred joists):
5.0 Plates / 1.0m² - Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
Minimum Order: 20 Lengths
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 3 Grooves at 200mm Centres – Accepts Tile or Wood Floors Directly
£8.83 Excluding VATUltra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top
Features:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS – Grade 300 kPa
- Design: 3 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
Minimum order: 8 Boards
Connector Core – Compression Fit
£2.40 Excluding VATThe ideal fitting for conecting our Pex & Pert Pipe to our Underfloor Heating manifolds
-
High quality plated brass construction
-
Stainless Steel Sleeves
-
Double ‘o’ ring secure seal
-
Safe and fast installation.
-
WRAS certified. (UK Certified for use with drinking water installations).
Heatmiser neoStat V2 – Programmable Thermostat
£46.80 Excluding VATA smarter way to control your underfloor heating from anywhere via your smartphone
The neoStat V2 is a 230v powered programmable thermostat and communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.
Click for: Product Installation & Data Sheet
HeatBoard ONE MAX PLUS – 2400x600mm – all in one 22mm Foiled & Grooved Chipboard Panel – High Heat Output
£42.50 Excluding VATHigh Output – Easy Lay Foiled Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
Accreditations:
- Chipboard to BS EN 312 / Type P5
Minimum Order: 15 Boards