WATER UNDERFLOOR HEATING
Wet underfloor heating is similar to radiators as it uses pipes to carry hot water under your flooring and is efficient so it can reduce your energy bills. We supply water underfloor heating systems and kits which are designed for easy installation and include everything required to get the underfloor heating up and running. We can also design a bespoke system tailored precisely to your needs. The systems are fully guaranteed including a 50-year pipe warranty.
ThermRite™ Aluminium Double Spreader Plate
Aluminium Heat Diffuser Plates - 2 Pipe Channels @ 200mm Pipe Centres
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. Each plate has 2 channels 200mm apart, designed to locate 15 & 16mm heating pipes. The plates are designed to fit inside standard 400mm centre to centre joist spacings.Specification:
- Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: 2.5 Plates / 1.0m²
Click Here For: PRODUCT DATA SHEET
Pipe Fixing Clip Rail – Self-Adhesive Backing – 1.0 Metre Interlocking Lengths
ThermRite™ Fit From Below Aluminium Double Spreader Plate – 250mm Wide
Fit From Below High Output Aluminium Heat Diffuser Plates - 2 Pipe Channels - 250mm Wide Plates
Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. The easy install option to fit your between joist underfloor heating without lifting the floor - designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installationSpecification:
- Plate Size: 1.0 Metre long x 250mm wide
- High Output: Each plate is 0.5mm thick for maximum heat distribution.
- Coverage: For Single run between 400mm centred joists: 2.5 Plates / 1.0m² For Double run between 600mm centred joists: 3.0 Plates / 1.0m²
- Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
20mm Plastic Castellated Floor Panel for 16mm Pipe
Electrothermic Manifold Actuator
Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.Click Here For: Actuator Datasheet
HeatBoard ONE MAX – 2400x600mm – all in one 22mm Grooved Chipboard Panel
Easy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
- Floor Board & Underfloor Heating Combined Panel
Specification:
- Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
- Dimensions: Width 600mm, Length: 2400mm, Height: 22mm
- Board Coverage: 1.44m²
- Weight: 20 Kg Per Panel
- Fire Protection: BS EN 13501-1 Class D
- Nominal Density: 660-690 kg/m³
- Low Emission Grade: E1 (Formaldehyde EN120) ≤8.0mg/100g
- Recycled Content: 80%
- Thermal Conductivity: 0.14W/mK
- Chipboard to BS EN 312 / Type P5
Click Here For: PRODUCT DATA SHEET
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
Ultra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on topFeatures:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS - Grade 300 kPa
- Design: 4 grooves @ 150mm centres + 'bulb' returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
60mm High Grip Barbed Pipe Clips 100/pack
60mm High Grip Barbed Pipe Clips 100/pack
Specifically designed for installation into rigid insulation boards (such as Kingspan and Celotex).
Clips are 60mm in length and offer high grip due to the barbed construction.
Clips can be used individually and simply pushed into position or alternatively loaded into a pipe clipping tool.
Minimum Order - 2 Packs (200 clips)