WATER UNDERFLOOR HEATING
Wet underfloor heating is similar to radiators as it uses pipes to carry hot water under your flooring and is efficient so it can reduce your energy bills. We supply water underfloor heating systems and kits which are designed for easy installation and include everything required to get the underfloor heating up and running. We can also design a bespoke system tailored precisely to your needs. The systems are fully guaranteed including a 50-year pipe warranty.
18mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
Ultra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on topFeatures:
- Low Profile (18mm)
- High Compressive Strength (500kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1250, Width- 600, Depth- 18mm (Each panel = 0.75m²)
- Construction:XPS - Grade 500 kPa
- Design: 4 grooves @ 150mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 12mm Pipe
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
Ultra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on topFeatures:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1250, Width- 600, Depth- 25mm (Each panel = 0.75m²)
- Construction:XPS - Grade 300 kPa
- Design: 4 grooves @ 150mm centres + 'lightbulb' returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
40mm High Grip Barbed Pipe Clips 100/pack
Fixing Screws For 22mm Routed Chipboard (200 per box)
Screws for fixing ThermRite Routed Chipboard to Floor Joists (200x per box)
Fixings required at each cross section with the joists below (150mm in from either side of the 600mm width).
Approx 32x Screws Per 2400mmx600mm ChipBoard Panel (Each Box of 200x ThermRite RTCHIP-R-Screws Will Cover Approximately 15m²)
ThermRite HeatBoard Co-Polymer Adhesive – 25 Litre Drum
ThermRite HeatBoard Co-Polymer adhesive for bonding porous (Wood / Cement board) and non-porous (aluminium foil) substrates together (125m2 approx.)
The Ideal Solution for Bonding Plywood or 6mm ThermRite Fibre Cement Boards to ThermRite HeatBoard ONE Panels
Note: This adhesive is only designed for use over our 22mm routed chipboard systems
Fixing Screws for 6mm Fibre Cement Boards (200 per box)
Screws for fixing ThermRite 6mm Fibre Cement Boards to Routed Chipboard (200x per box)
Approx 48x Screws Per 1200x800 Cement Board (Each Box of 200x ThermRite RTCHIP-CB-Screws Will Cover Approxiomately 4m²)
Click Here For: 6mm FIBRE CEMENT BOARD PRODUCT DATA SHEET
ThermRite 6mm Fibre Cement Cover Boards For HeatBoard ONE Panels
ThermRite 6mm Fibre Cement Cover Boards are high strength, water resistant cement fibre boards used as the covering layer over our HeatBoard ONE routed chipboard underfloor heating systems.
Features:
- Strengthen the surface of the routed carrier board, whilst also offering excellent and even heat transfer to the surfaces above.
- Allow for ceramic and porcelain tiles to be laid directly over the surface after installation.
- Excellent Water Resistance
- High Compressive Strength and Impact Resistance
- Easy to Install
- Mould Resistant
Specification:
- Dimensions: Width 800mm, Length: 1200mm, Height: 6mm
- Board Coverage: 0.96m²
- Weight: 9 Kg Per Panel
- Thermal Conductivity: 0.19 W/mK
- Thermal Resistance: 0.039m² K/W
- Warm Water Resistance: Pass EN12467
- Freeze/Thaw Resistance: Pass EN12467
- Soak/Dry Resistance: Pass EN12467
Click Here For: PRODUCT DATA SHEET
144.0m² ThermRite™ HeatBoard ULTRA 2400mm Grooved & Plated Chipboard System
High Output, Easy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels
- Floor Board & Underfloor Heating Integrated Onto One Panel
- Aluminium Heat Diffusion Plates Within Grooves For Pipe
- Includes Pipe Layout
System Includes:
- 100 x ThermRite™ Heatboard ULTRA Panels
- 900 x ThermRite Single Groove Aluminium Heat Diffusion Plates
- A Rated Grundfos Pump and Mixing Valve
- 12 Port Dualmix Manifold & Connectors
- 12mm High Specification 5 Layer Pert-Al-Pert pipe x 960 metres
- Digital Programmable Thermostat
- Pipe Cutters
- Pipe Reaming Tool
Click Here For: PRODUCT DATA SHEET
138.0m² ThermRite™ HeatBoard ULTRA 2400mm Grooved & Plated Chipboard System
High Output, Easy Lay Chipboard Floor Deck, Underfloor Heating System for Joisted Floors
Features:
- 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels
- Floor Board & Underfloor Heating Integrated Onto One Panel
- Aluminium Heat Diffusion Plates Within Grooves For Pipe
- Includes Pipe Layout
System Includes:
- 96 x ThermRite™ Heatboard ULTRA Panels
- 864 x ThermRite Single Groove Aluminium Heat Diffusion Plates
- A Rated Grundfos Pump and Mixing Valve
- 12 Port Dualmix Manifold & Connectors
- 12mm High Specification 5 Layer Pert-Al-Pert pipe x 960 metres
- Digital Programmable Thermostat
- Pipe Cutters
- Pipe Reaming Tool
