In-screed Underfloor Heating System
ECOFLEX In-Screed Underfloor Heating Cable is a single core cable rated at 15W/lin metre. Used to provide underfloor heating in new build projects in screeded floors. Typically laid directly onto foil backed insulation then covered with a minimum of 50mm sand & cement screed. On new build projects with screed floors this cable can provide an economical heating solution.
Analogue Room Thermostat – TH131
The TH131 is an electronic thermostat developed for optimal regulation of underfloor heating systems.
The TH131 is a simple to use thermostat. Temperature control is via a simple analogue dial. The thermostat has three modes of operation. Choose between room thermostat, floor thermostat or a combination of room thermostat with floor limit sensor.Click Here For: TH131 Product Manual
Heatmiser neoStat-e V2 – Electric Floor Heating Thermostat
A smarter way to control your underfloor heating from anywhere via your smartphone
The Heatmiser neoStat-e is our electric floor heating model, capable of switching up to 16A. A 3M remote floor sensor is provided and the neoStat-e can be used alongside all other neoStat models on the same system. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: NeoStat-E V2 Product Manual
In-Screed Cable 1.0 – 2.0 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 1.0 m² General Room Heat (160 watts/m² - Room Heating) - 1.3 m² Background Heat (100 watts/m² - Tile Warming) - 2.0 m²- Total Output : 200 Watts
- Length : 13.7 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
Wireless 7 Day Programmable Room Thermostat – V22
The V22 Wireless Programmable Thermostat is designed to provide wireless time and temperature control to heating systems
Wall or Stand mounted (Supplied with stand) The V22 is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3
The Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind
The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat. A 3M remote floor sensor is provided. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Slimline-E V3 Product Manual
Wireless Kit – 7 Day Programmable Room Thermostat and Receiver
This Wireless Thermostat Kit consisting of a Wireless Programmable Thermostat (V22) & a Receiver (V23), is designed to provide wireless time and temperature control to heating systems
Wall or Stand mounted thermostat (Supplied with stand) The V22 is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
Flexel Touch – Electric Floor Heating Thermostat
The new Touch is designed to be the simplest to use electric underfloor heating control available.
The Touch comes packed with innovative features to optimise your comfort and minimise running costs with the simplest touch screen interface. A large full colour backlit touch screen provides simple programming by guiding you through program setup and adjustment - no need for any complicated instruction manual.Click Here For: Flexel Touch Product Manual
High Temperature Fixing Tape
In-Screed Cable 1.6 – 3.3 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 1.6 m² General Room Heat (160 watts/m² - Room Heating) - 2.0 m² Background Heat (100 watts/m² - Tile Warming) - 3.3 m²- Total Output : 340 Watts
- Length : 22.0 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
Wireless Receiver Unit – V23
The V23 receiver is a Wall mounting receiver, specially designed to control electrical floor heating in combination with either the V22 Thermostat and/or V24 Central Controller.
It is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
Electric Underfloor Heating Central Wireless Control System – V24
The V24 Central Control System is a multizone central heating control unit.
V24 consists of a centrally located colour touch screen panel that communicates wirelessly with thermostats (V22) and sensors (V23) throughout your home. The V24 is a central control panel that links with V22 single zone control packs to provide convenient control of your whole house from a central location. The V24 comprises a colour touchscreen panel that wirelessly communicates with V22 thermostats throughout the home.This is a multi-zone controller that is fully scalable up to 24 zones. The V24 WIFI provides the same functions as the V24 central controller but with the ability to be controlled from your Smart Phone, using the intuitive iOS or Android App.
In-Screed Cable – Plastic Fixing Strip
A moulded plastic fixing strip with cable radius profile fixing.
Available in 500mm lengths which can provide cable spacing of 65mm. Can be mechanically fixed or taped to the subfloor. Cables are then tensioned through the profile strip when laying. An extremely quick and efficient method of cable spacing and laying.Strip Length: 500mm
In-Screed Cable 2.1- 4.2 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 2.1 m² General Room Heat (160 watts/m² - Room Heating) - 2.6 m² Background Heat (100 watts/m² - Tile Warming) - 4.2 m²- Total Output : 420 Watts
- Length : 28.0 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
In-Screed Cable – Galvanised Fixing Strip
In-Screed Cable 2.8- 5.5 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 2.8 m² General Room Heat (160 watts/m² - Room Heating) - 3.5 m² Background Heat (100 watts/m² - Tile Warming) - 5.5 m²- Total Output : 550 Watts
- Length : 37.0 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
In-Screed Cable 3.4- 6.7 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 3.4 m² General Room Heat (160 watts/m² - Room Heating) - 4.2 m² Background Heat (100 watts/m² - Tile Warming) - 6.7 m²- Total Output : 660 Watts
- Length : 45.0 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
In-Screed Cable – Fixing Clip Pack
In-Screed Cable 3.9- 7.8 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 3.9 m² General Room Heat (160 watts/m² - Room Heating) - 4.9 m² Background Heat (100 watts/m² - Tile Warming) - 7.8 m²- Total Output : 800 Watts
- Length : 52.0 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
HomeKit-Enabled Heatmiser neoHub Gen 2
Heatmiser neoHub is the gateway to the Neo System
The Heatmiser neoHub provides remote control of all neoStat's and neoPlug's from your iOS, Android and Windows 10 device. The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.Click for: Product Installation & Data Sheet
In-Screed Cable 4.4- 9.0 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 4.4 m² General Room Heat (160 watts/m² - Room Heating) - 5.5 m² Background Heat (100 watts/m² - Tile Warming) - 9.0 m²- Total Output : 880 Watts
- Length : 59.0 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
In-Screed Cable 4.8- 9.6 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 4.8 m² General Room Heat (160 watts/m² - Room Heating) - 6.0 m² Background Heat (100 watts/m² - Tile Warming) - 9.6 m²- Total Output : 960 Watts
- Length : 64.0 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
Electric Floor Heating Touchscreen Room Thermostat – Heatmiser Touch-E v2
The Heatmiser Touch-e is our touchscreen electric floor heating thermostat
Our touchscreen electric floor heating model, capable of switching up to 16A and the touchscreen interface makes interacting with the heating system easy. The Touch-e V2 is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Touch-E V2 Product Manual
In-Screed Cable 5.4- 10.8 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 5.4 m² General Room Heat (160 watts/m² - Room Heating) - 6.7 m² Background Heat (100 watts/m² - Tile Warming) - 10.8 m²- Total Output : 1070 Watts
- Length : 72.0 metres
- LIFETIME Guarantee
