In-screed Underfloor Heating System
ECOFLEX In-Screed Underfloor Heating Cable is a single core cable rated at 15W/lin metre. Used to provide underfloor heating in new build projects in screeded floors. Typically laid directly onto foil backed insulation then covered with a minimum of 50mm sand & cement screed. On new build projects with screed floors this cable can provide an economical heating solution.
In-Screed Cable – Plastic Fixing Strip
£0.80 Excluding VATA moulded plastic fixing strip with cable radius profile fixing.
Available in 500mm lengths which can provide cable spacing of 65mm. Can be mechanically fixed or taped to the subfloor. Cables are then tensioned through the profile strip when laying. An extremely quick and efficient method of cable spacing and laying.
Strip Length: 500mm
Heatmiser Sensor Probe
£4.60 Excluding VATRemote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor.
This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Suitable for all Heatmiser Thermostats
High Temperature Fixing Tape
£5.55 Excluding VATHeavy duty adhesive tape available in a 15mm x 50m roll.
Hi-tack for fixing and locating cable. Always ensure sub-floor surface is dry and dust free.
Roll Dimensions: 15mm x 50 metres
In-Screed Cable – Fixing Clip Pack
£6.95 Excluding VATPlastic fixing clip for attaching cable on to foil foam backed insulation material. Deep barbed design provides secure fixing.
Pack Contents: 50 Clips
Flexel Sensor Probe
£12.95 Excluding VATRemote Air/Floor Sensor Probe
This sensor can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
For Use with:
- V22/V23 Thermostat/Receiver
- Flexel Touch Thermostat
- TH232 Thermostat
In-Screed Cable – Galvanised Fixing Strip
£13.95 Excluding VATAvailable as a 10m roll of galvanised steel strip. The product has cable fixing lugs at 35mm centres. Ideal when laying thicker cables on all sub-floor types. The ultimate in flexibility.
Roll Length: 10 Metres
In-Screed Cable 1.0 – 2.0 m²
£35.13 Excluding VATHigh Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.
Coverage:
High Heat Loss Applications (200 watts/m² – Conservatory/Garden Room) – 1.0 m²
General Room Heat (160 watts/m² – Room Heating) – 1.3 m²
Background Heat (100 watts/m² – Tile Warming) – 2.0 m²
- Total Output : 200 Watts
- Length : 13.7 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3
£38.95 Excluding VATThe Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind
The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat.
A 3M remote floor sensor is provided.
NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.
Click Here For: Slimline-E V3 Product Manual
In-Screed Cable 1.6 – 3.3 m²
£42.50 Excluding VATHigh Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.
Coverage:
High Heat Loss Applications (200 watts/m² – Conservatory/Garden Room) – 1.6 m²
General Room Heat (160 watts/m² – Room Heating) – 2.0 m²
Background Heat (100 watts/m² – Tile Warming) – 3.3 m²
- Total Output : 340 Watts
- Length : 22.0 metres
- LIFETIME Guarantee