In-screed Underfloor Heating System
ECOFLEX In-Screed Underfloor Heating Cable is a single core cable rated at 15W/lin metre. Used to provide underfloor heating in new build projects in screeded floors. Typically laid directly onto foil backed insulation then covered with a minimum of 50mm sand & cement screed. On new build projects with screed floors this cable can provide an economical heating solution.
Analogue Room Thermostat – TH131
The TH131 is an electronic thermostat developed for optimal regulation of underfloor heating systems.
The TH131 is a simple to use thermostat. Temperature control is via a simple analogue dial. The thermostat has three modes of operation. Choose between room thermostat, floor thermostat or a combination of room thermostat with floor limit sensor.Click Here For: TH131 Product Manual
Heatmiser neoStat-e V2 – Electric Floor Heating Thermostat
A smarter way to control your underfloor heating from anywhere via your smartphone
The Heatmiser neoStat-e is our electric floor heating model, capable of switching up to 16A. A 3M remote floor sensor is provided and the neoStat-e can be used alongside all other neoStat models on the same system. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: NeoStat-E V2 Product Manual
In-Screed Cable 1.0 – 2.0 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 1.0 m² General Room Heat (160 watts/m² - Room Heating) - 1.3 m² Background Heat (100 watts/m² - Tile Warming) - 2.0 m²- Total Output : 200 Watts
- Length : 13.7 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
Wireless 7 Day Programmable Room Thermostat – V22
The V22 Wireless Programmable Thermostat is designed to provide wireless time and temperature control to heating systems
Wall or Stand mounted (Supplied with stand) The V22 is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.Electric Floor Heating Smart Thermostat Kit – Heatmiser neoKit-E Gen 2 V2
A smarter way to control your underfloor heating from anywhere via your smartphone
The Heatmiser neoKit-e Gen 2 includes 1 neoStat-e V2 and a neoHub Gen 2, allowing you to take control of your heating from anywhere. The Gen 2 neoHub brings HomeKit support to all connected Neo Devices.
Click Here For: NeoStat-e V2 Product Manual
Click Here For: NeoHub Product Manual
Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3
The Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind
The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat. A 3M remote floor sensor is provided. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Slimline-E V3 Product Manual
Wireless Kit – 7 Day Programmable Room Thermostat and Receiver
This Wireless Thermostat Kit consisting of a Wireless Programmable Thermostat (V22) & a Receiver (V23), is designed to provide wireless time and temperature control to heating systems
Wall or Stand mounted thermostat (Supplied with stand) The V22 is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
Flexel Touch – Electric Floor Heating Thermostat
The new Touch is designed to be the simplest to use electric underfloor heating control available.
The Touch comes packed with innovative features to optimise your comfort and minimise running costs with the simplest touch screen interface. A large full colour backlit touch screen provides simple programming by guiding you through program setup and adjustment - no need for any complicated instruction manual.Click Here For: Flexel Touch Product Manual
High Temperature Fixing Tape
In-Screed Cable 1.6 – 3.3 m²
High Output In-Screed Heating Cable
Suitable for use under ceramic, stone or marble tiles, carpet, wood, and laminate floors, in internal applications such as kitchens, bathrooms and conservatories.Coverage:
High Heat Loss Applications (200 watts/m² - Conservatory/Garden Room) - 1.6 m² General Room Heat (160 watts/m² - Room Heating) - 2.0 m² Background Heat (100 watts/m² - Tile Warming) - 3.3 m²- Total Output : 340 Watts
- Length : 22.0 metres
- LIFETIME Guarantee
Click Here For: PRODUCT DATA SHEET
Wireless Receiver Unit – V23
The V23 receiver is a Wall mounting receiver, specially designed to control electrical floor heating in combination with either the V22 Thermostat and/or V24 Central Controller.
It is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
