In-screed Underfloor Heating System
ECOFLEX In-Screed Underfloor Heating Cable is a single core cable rated at 15W/lin metre. Used to provide underfloor heating in new build projects in screeded floors. Typically laid directly onto foil backed insulation then covered with a minimum of 50mm sand & cement screed. On new build projects with screed floors this cable can provide an economical heating solution.
Heatmiser Sensor Probe
£4.60 Excluding VATRemote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor.
This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Suitable for all Heatmiser Thermostats
Heatmiser neoStat-e V2 – Electric Floor Heating Thermostat
£53.50 Excluding VATA smarter way to control your underfloor heating from anywhere via your smartphone
The Heatmiser neoStat-e is our electric floor heating model, capable of switching up to 16A. A 3M remote floor sensor is provided and the neoStat-e can be used alongside all other neoStat models on the same system.
NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.
Click Here For: NeoStat-E V2 Product Manual
HomeKit-Enabled Heatmiser neoHub Gen 2
Original price was: £93.50.£88.95Current price is: £88.95. Excluding VATHeatmiser neoHub is the gateway to the Neo System
The Heatmiser neoHub provides remote control of all neoStat’s and neoPlug’s from your iOS, Android and Windows 10 device.
The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.
Click for: Product Installation & Data Sheet
In-Screed Cable – Fixing Clip Pack
£6.95 Excluding VATPlastic fixing clip for attaching cable on to foil foam backed insulation material. Deep barbed design provides secure fixing.
Pack Contents: 50 Clips
In-Screed Cable – Plastic Fixing Strip
£0.80 Excluding VATA moulded plastic fixing strip with cable radius profile fixing.
Available in 500mm lengths which can provide cable spacing of 65mm. Can be mechanically fixed or taped to the subfloor. Cables are then tensioned through the profile strip when laying. An extremely quick and efficient method of cable spacing and laying.
Strip Length: 500mm
Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3
£38.95 Excluding VATThe Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind
The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat.
A 3M remote floor sensor is provided.
NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.
Click Here For: Slimline-E V3 Product Manual
High Temperature Fixing Tape
£5.55 Excluding VATHeavy duty adhesive tape available in a 15mm x 50m roll.
Hi-tack for fixing and locating cable. Always ensure sub-floor surface is dry and dust free.
Roll Dimensions: 15mm x 50 metres
Electric Floor Heating Touchscreen Room Thermostat – Heatmiser Touch-E v2
£59.95 Excluding VATThe Heatmiser Touch-e is our touchscreen electric floor heating thermostat
Our touchscreen electric floor heating model, capable of switching up to 16A and the touchscreen interface makes interacting with the heating system easy.
The Touch-e V2 is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution.
NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.
Click Here For: Touch-E V2 Product Manual
Wireless Receiver Unit – V23
£55.15 Excluding VATThe V23 receiver is a Wall mounting receiver, specially designed to control electrical floor heating in combination with either the V22 Thermostat and/or V24 Central Controller.
It is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.