Ecofilm Underfloor Heating for Laminate & Wood Floors
Ecofilm Element Kit 3.1 – 4.0m² @ 160watts/m²
Ecofilm Pro Kit – 160watts/m² – For wood/laminate floor finishes
ECOFILM PRO is a complete heating solution in a box, for wood, laminate and engineered wood floors
High Heat Output 160watts/m² For high heat loss areas such as heavily glazed rooms and poorly insulated properties. Kit Includes:- Roll of 500mm Wide Film
- Heating Element Connection Crimps
- Cold Tail Connection Leads (Brown & Blue)
- Mastic Insulation Tape
- Green Polyester Tape Discs
- Ratchet Crimping Tool
- Full Installation Instructions
- Lifetime Guarantee
Click Here For: PRODUCT INSTALLATION & DATA SHEET
Electric Floor Heating Smart Thermostat Kit – Heatmiser neoKit-E Gen 2 V2
A smarter way to control your underfloor heating from anywhere via your smartphone
The Heatmiser neoKit-e Gen 2 includes 1 neoStat-e V2 and a neoHub Gen 2, allowing you to take control of your heating from anywhere. The Gen 2 neoHub brings HomeKit support to all connected Neo Devices.
Click Here For: NeoStat-e V2 Product Manual
Click Here For: NeoHub Product Manual
High Specification Adhesive Tape
Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3
The Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind
The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat. A 3M remote floor sensor is provided. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Slimline-E V3 Product Manual
Wireless Kit – 7 Day Programmable Room Thermostat and Receiver
This Wireless Thermostat Kit consisting of a Wireless Programmable Thermostat (V22) & a Receiver (V23), is designed to provide wireless time and temperature control to heating systems
Wall or Stand mounted thermostat (Supplied with stand) The V22 is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
500mm wide Ecofilm Underfloor Heating Element – 130 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m. The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”.
Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
500mm wide Ecofilm Underfloor Heating Element – 160 watts/m²
ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m.
The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”. Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.INCLUDES - Installation Manual & LIFETIME Guarantee
