ECOFILM Underfloor Heating is designed to heat directly underneath wood and laminate floors and is available in two standard power dissipations: 130 Watts/m2 for internal living areas and a high output 160 Watts/m2 for conservatory installations. ECOFILM can be used in conjunction with ECOMAX-DUO, which makes it suitable for carpet and vinyl floors.

Showing 1–9 of 33 results

Ecofilm Pro Kit – 160watts/m² – For wood/laminate floor finishes

£146.85£424.10 Excluding VAT

ECOFILM PRO is a complete heating solution in a box, for wood, laminate and engineered wood floors

High Heat Output 160watts/m² For high heat loss areas such as heavily glazed rooms and poorly insulated properties. Kit Includes:
  • Roll of 500mm Wide Film
  • Heating Element Connection Crimps
  • Cold Tail Connection Leads (Brown & Blue)
  • Mastic Insulation Tape
  • Green Polyester Tape Discs
  • Ratchet Crimping Tool
  • Full Installation Instructions
  • Lifetime Guarantee
Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations
Click Here For: PRODUCT INSTALLATION & DATA SHEET

Polyester Vapour Barrier – 1.0 Metre Wide

£28.50£45.45 Excluding VAT

Polyester Vapour Barrier - The essential top layer of your Eco Film system 1.0m Wide

Heatmiser neoStat-e V2 – Electric Floor Heating Thermostat

£53.50 Excluding VAT

A smarter way to control your underfloor heating from anywhere via your smartphone

The Heatmiser neoStat-e is our electric floor heating model, capable of switching up to 16A. A 3M remote floor sensor is provided and the neoStat-e can be used alongside all other neoStat models on the same system. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.

Click Here For: NeoStat-E V2 Product Manual

Electric Floor Heating Smart Thermostat Kit – Heatmiser neoKit-E Gen 2 V2

£174.70£188.45 Excluding VAT
A smarter way to control your underfloor heating from anywhere via your smartphone The Heatmiser neoKit-e Gen 2 includes 1 neoStat-e V2 and a neoHub Gen 2, allowing you to take control of your heating from anywhere. The Gen 2 neoHub brings HomeKit support to all connected Neo Devices.

Click Here For: NeoStat-e V2 Product Manual

Click Here For: NeoHub Product Manual

Ecofilm Element Kit 4.1 – 5.0m² @ 160watts/m²

£202.55 Excluding VAT

Includes:

  • Ecofilm Heating Elements
  • Programmable Thermostat (select below)
  • 6mm Floor Insulation
  • Polyester Vapour Barrier
  • Fixing Tape
  • Commoning Blocks

For High heat output to rooms measuring 4.1 - 5.0m²

This High output system is ideally suited to Conservatories and areas of high heat loss

Ecofilm Element Kit 3.1 – 4.0m² @ 160watts/m²

£182.98 Excluding VAT

Includes:

  • Ecofilm Heating Elements
  • Programmable Thermostat (select below)
  • 6mm Floor Insulation
  • Polyester Vapour Barrier
  • Fixing Tape
  • Commoning Blocks

For High heat output to rooms measuring 3.1 - 4.0m²

This High output system is ideally suited to Conservatories and areas of high heat loss

Ecofilm Element Kit 0 – 3.0m² @ 160watts/m²

£131.00 Excluding VAT

Includes:

  • Ecofilm Heating Elements
  • Programmable Thermostat (select below)
  • 6mm Floor Insulation
  • Polyester Vapour Barrier
  • Fixing Tape
  • Commoning Blocks
For High heat output to rooms measuring 0 - 3.0m² This High output system is ideally suited to Conservatories and areas of high heat loss

Ecofilm Element Kit 4.1 – 5.0m² @ 130watts/m²

£202.55 Excluding VAT

Includes:

  • Ecofilm Heating Elements
  • Programmable Thermostat (select below)
  • 6mm Floor Insulation
  • Polyester Vapour Barrier
  • Fixing Tape
  • Commoning Blocks

For standard heat output to rooms measuring 4.1 - 5.0m²

Ecofilm Element Kit 3.1 – 4.0m² @ 130watts/m²

£182.98 Excluding VAT

Includes:

  • EcoFilm Heating Elements
  • Programmable Thermostat (select below)
  • 6mm Floor Insulation
  • Polyester Vapour Barrier
  • Fixing Tape
  • Commoning Blocks

For standard heat output to rooms measuring 3.1 - 4.0m²