ECOFILM Underfloor Heating is designed to heat directly underneath wood and laminate floors and is available in two standard power dissipations: 130 Watts/m2 for internal living areas and a high output 160 Watts/m2 for conservatory installations. ECOFILM can be used in conjunction with ECOMAX-DUO, which makes it suitable for carpet and vinyl floors.

Showing 1–12 of 33 results

Ecofilm Pro Kit – 160watts/m² – For wood/laminate floor finishes

£139.86£403.87 Excluding VAT

ECOFILM PRO is a complete heating solution in a box, for wood, laminate and engineered wood floors

High Heat Output 160watts/m² For high heat loss areas such as heavily glazed rooms and poorly insulated properties. Kit Includes:
  • Roll of 500mm Wide Film
  • Heating Element Connection Crimps
  • Cold Tail Connection Leads (Brown & Blue)
  • Mastic Insulation Tape
  • Green Polyester Tape Discs
  • Ratchet Crimping Tool
  • Full Installation Instructions
  • Lifetime Guarantee
Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations
Click Here For: PRODUCT INSTALLATION & DATA SHEET

Polyester Vapour Barrier – 1.0 Metre Wide

£27.07£42.90 Excluding VAT

Polyester Vapour Barrier - The essential top layer of your Eco Film system 1.0m Wide

Heatmiser neoStat-e V2 – Electric Floor Heating Thermostat

£53.50 Excluding VAT

A smarter way to control your underfloor heating from anywhere via your smartphone

The Heatmiser neoStat-e is our electric floor heating model, capable of switching up to 16A. A 3M remote floor sensor is provided and the neoStat-e can be used alongside all other neoStat models on the same system. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.

Click Here For: NeoStat-E V2 Product Manual

Electric Floor Heating Smart Thermostat Kit – Heatmiser neoKit-E Gen 2 V2

£174.70£188.45 Excluding VAT
A smarter way to control your underfloor heating from anywhere via your smartphone The Heatmiser neoKit-e Gen 2 includes 1 neoStat-e V2 and a neoHub Gen 2, allowing you to take control of your heating from anywhere. The Gen 2 neoHub brings HomeKit support to all connected Neo Devices.

Click Here For: NeoStat-e V2 Product Manual

Click Here For: NeoHub Product Manual

Ecofilm Element Kit 4.1 – 5.0m² @ 160watts/m²

£202.55 Excluding VAT

Includes:

  • Ecofilm Heating Elements
  • Programmable Thermostat (select below)
  • 6mm Floor Insulation
  • Polyester Vapour Barrier
  • Fixing Tape
  • Commoning Blocks

For High heat output to rooms measuring 4.1 - 5.0m²

This High output system is ideally suited to Conservatories and areas of high heat loss

Ecofilm Element Kit 3.1 – 4.0m² @ 160watts/m²

£182.98 Excluding VAT

Includes:

  • Ecofilm Heating Elements
  • Programmable Thermostat (select below)
  • 6mm Floor Insulation
  • Polyester Vapour Barrier
  • Fixing Tape
  • Commoning Blocks

For High heat output to rooms measuring 3.1 - 4.0m²

This High output system is ideally suited to Conservatories and areas of high heat loss

Ecofilm Element Kit 0 – 3.0m² @ 160watts/m²

£131.00 Excluding VAT

Includes:

  • Ecofilm Heating Elements
  • Programmable Thermostat (select below)
  • 6mm Floor Insulation
  • Polyester Vapour Barrier
  • Fixing Tape
  • Commoning Blocks
For High heat output to rooms measuring 0 - 3.0m² This High output system is ideally suited to Conservatories and areas of high heat loss

Ecofilm Element Kit 4.1 – 5.0m² @ 130watts/m²

£202.55 Excluding VAT

Includes:

  • Ecofilm Heating Elements
  • Programmable Thermostat (select below)
  • 6mm Floor Insulation
  • Polyester Vapour Barrier
  • Fixing Tape
  • Commoning Blocks

For standard heat output to rooms measuring 4.1 - 5.0m²

Ecofilm Element Kit 3.1 – 4.0m² @ 130watts/m²

£182.98 Excluding VAT

Includes:

  • EcoFilm Heating Elements
  • Programmable Thermostat (select below)
  • 6mm Floor Insulation
  • Polyester Vapour Barrier
  • Fixing Tape
  • Commoning Blocks

For standard heat output to rooms measuring 3.1 - 4.0m²

Ecofilm Element Kit 0 – 3.0m² @ 130watts/m²

£131.00 Excluding VAT

Includes:

  • Ecofilm Heating Elements
  • Programmable Thermostat (select below)
  • 6mm Floor Insulation
  • Polyester Vapour Barrier
  • Fixing Tape
  • Commoning Blocks

For standard heat output to rooms measuring 0 - 3.0m²

Flexel Touch – Electric Floor Heating Thermostat

£65.93£73.78 Excluding VAT

The new Touch is designed to be the simplest to use electric underfloor heating control available.

The Touch comes packed with innovative features to optimise your comfort and minimise running costs with the simplest touch screen interface. A large full colour backlit touch screen provides simple programming by guiding you through program setup and adjustment - no need for any complicated instruction manual.

Click Here For: Flexel Touch Product Manual

500mm wide Ecofilm Underfloor Heating Element – 160 watts/m²

£35.19£110.14 Excluding VAT

ECOFILMSET Underfloor Heating Elements are available in three different widths with standard lengths up to 10m.

The element lengths can be reduced on site if necessary and are supplied as standard with 5m “cold tails”. Available in two standard power dissipations: 130 Watts/m2 for internal living areas and 160 Watts/m2 for conservatories and areas of high heat loss. For Wood floor heating in wet areas e.g bathrooms/shower rooms, you should use our ECOFOIL Product.

INCLUDES - Installation Manual & LIFETIME Guarantee