ELECTRIC UNDERFLOOR HEATING
The quick and simple to install solution for all tile, stone, wood and laminate floors.
Choose from The Floor Heating Warehouse range of Electric Underfloor Heating kits and products for virtually any flooring material.
Ecofloor Mat & Ecoflex loose cable underfloor heating systems for under ceramic, stone and marble tiles
Ecofilm under floor heating system for wood & laminate floors
In-Screed direct underfloor heating systems for new builds
In-Screed Cable – Plastic Fixing Strip
£0.80 Excluding VATA moulded plastic fixing strip with cable radius profile fixing.
Available in 500mm lengths which can provide cable spacing of 65mm. Can be mechanically fixed or taped to the subfloor. Cables are then tensioned through the profile strip when laying. An extremely quick and efficient method of cable spacing and laying.
Strip Length: 500mm
ThermRite™ Insulation Board – Professional Grade
£2.95 – £13.90 Excluding VATOptional Insulation Board – designed to insulate below underfloor heating systems
Specification:
- Size: 1200 x 600m
- Coverage: 0.72m² / Board
- Available Thickness, 3.0, 6.0, 10.0, 20.0 & 25.0mm
- High Compressive Strength of 30 Tonnes / m² (300kPa)
- Thermal conductivity = 0.035 W/mK
- Fire Classification = Euroclass E
Minimum Order: 14 Boards
Heatmiser Sensor Probe
£4.60 Excluding VATRemote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor.
This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Suitable for all Heatmiser Thermostats
High Temperature Fixing Tape
£5.55 Excluding VATHeavy duty adhesive tape available in a 15mm x 50m roll.
Hi-tack for fixing and locating cable. Always ensure sub-floor surface is dry and dust free.
Roll Dimensions: 15mm x 50 metres
ThermRite™ Backer Board – High Strength Insulation
£5.75 – £13.46 Excluding VATThermRite™ Backer Board is a strong, lightweight, insulated tile backer board developed specifically for use with our undertile heating systems.
- Size : 1250 x 600mm
- Board Coverage : 0.75 m2/board (6 boards = 4.5m2 coverage)
Minimum order: 6 boards
In-Screed Cable – Fixing Clip Pack
£6.95 Excluding VATPlastic fixing clip for attaching cable on to foil foam backed insulation material. Deep barbed design provides secure fixing.
Pack Contents: 50 Clips
Heatmiser Thimble Sensor
£11.26 Excluding VATDiscreet Temperature Monitoring
The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly.
Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall.
The thimble sensor can be wired up to 20M away from the room thermostats.
Click for: Product Installation & Data Sheet
Insulation Fixing Pack
£11.79 Excluding VATComplete Pack for secure fixing of our Tile Backer Insulation Boards
- 200 x Posidrive Screws 4.0 x 40mm
200 x Galvanised Washers 36mm - Coverage : Up to 11.0m² (14 Boards)
Flexel Sensor Probe
£12.95 Excluding VATRemote Air/Floor Sensor Probe
This sensor can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
For Use with:
- V22/V23 Thermostat/Receiver
- Flexel Touch Thermostat
- TH232 Thermostat