The quick and simple to install solution for all tile, stone, wood and laminate floors.

Choose from The Floor Heating Warehouse range of Electric Underfloor Heating kits and products for virtually any flooring material.

Ecofloor Mat & Ecoflex loose cable underfloor heating systems for under ceramic, stone and marble tiles
Ecofilm under floor heating system for wood & laminate floors
In-Screed direct underfloor heating systems for new builds

Showing 1–12 of 95 results

ThermRite™ Insulation Board – Professional Grade

£2.95£13.90 Excluding VAT

Optional Insulation Board - designed to insulate below underfloor heating systems

Specification:

  • Size: 1200 x 600m
  • Coverage: 0.72m² / Board
  • Available Thickness, 3.0, 6.0, 10.0, 20.0 & 25.0mm
  • High Compressive Strength of 30 Tonnes / m² (300kPa)
  • Thermal conductivity = 0.035 W/mK
  • Fire Classification = Euroclass E
Minimum Order: 14 Boards

ThermRite™ Backer Board – High Strength Insulation

£5.75£12.81 Excluding VAT

ThermRite™ Backer Board is a strong, lightweight, insulated tile backer board developed specifically for use with our undertile heating systems.

  • Size : 1250 x 600mm
  • Board Coverage : 0.75 m2/board (6 boards = 4.5m2 coverage)
Minimum order: 6 boards

Heatmiser neoStat-e V2 – Electric Floor Heating Thermostat

£53.50 Excluding VAT

A smarter way to control your underfloor heating from anywhere via your smartphone

The Heatmiser neoStat-e is our electric floor heating model, capable of switching up to 16A. A 3M remote floor sensor is provided and the neoStat-e can be used alongside all other neoStat models on the same system. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.

Click Here For: NeoStat-E V2 Product Manual

Heatmiser Sensor Probe

£4.60 Excluding VAT

Remote Air/Floor Sensor Probe

The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats

HomeKit-Enabled Heatmiser neoHub Gen 2

£88.95 Excluding VAT

Heatmiser neoHub is the gateway to the Neo System

The Heatmiser neoHub provides remote control of all neoStat's and neoPlug's from your iOS, Android and Windows 10 device. The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.

Click for: Product Installation & Data Sheet

Heatmiser neoStat-hw V2 – Hot Water Programmer

£45.50 Excluding VAT

A smarter way to control your hot water from anywhere via your smartphone.

The neoStat-hw V2 is a 230v powered timer and communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.

Click for: Product Installation & Data Sheet

In-Screed Cable – Fixing Clip Pack

£6.55 Excluding VAT

Plastic fixing clip for attaching cable on to foil foam backed insulation material. Deep barbed design provides secure fixing.

Pack Contents: 50 Clips

In-Screed Cable – Plastic Fixing Strip

£0.75 Excluding VAT

A moulded plastic fixing strip with cable radius profile fixing.

Available in 500mm lengths which can provide cable spacing of 65mm. Can be mechanically fixed or taped to the subfloor. Cables are then tensioned through the profile strip when laying. An extremely quick and efficient method of cable spacing and laying.

Strip Length: 500mm

Heatmiser Thimble Sensor

£11.26 Excluding VAT

Discreet Temperature Monitoring

The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.

Click for: Product Installation & Data Sheet

Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3

£38.95 Excluding VAT

The Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind

The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat. A 3M remote floor sensor is provided. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.

Click Here For: Slimline-E V3 Product Manual

6mm Ecomax Lite Insulation – Pack

£18.34£88.63 Excluding VAT

6mm Insulation Panel designed to be used with our Ecofilm and Ecofoil under wood and laminate systems.

A specifically designed closed cell foamed polystyrene insulation material for use below wood, laminate and engineered boards.

High Specification Adhesive Tape

£7.62 Excluding VAT

High Specification Adhesive Tape - suitable for high temperatures - 50mm x 50 metre

Used for taping joints in insulation boards and taping down cables and mats.