Neo Systems 12 volt
Heatmiser Sensor Probe
£4.60 Excluding VATRemote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor.
This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Suitable for all Heatmiser Thermostats
Heatmiser Sensor Probe Housing – EN030
£5.05 Excluding VATRoom Sensor Enclosure
Housing for discreet location of the sensor probe
Dimensions 80Wx 80H x 22D mm
Electrothermic Manifold Actuator
£11.25 Excluding VATManifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.
Click Here For: Actuator Datasheet
Heatmiser Thimble Sensor
£11.26 Excluding VATDiscreet Temperature Monitoring
The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly.
Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall.
The thimble sensor can be wired up to 20M away from the room thermostats.
Click for: Product Installation & Data Sheet
Heatmiser Boost – Neo & RF Series Repeater
£40.55 Excluding VATBoost your Wireless and Neo signals
The Heatmiser Boost is our Neo & RF Series Repeater. The Boost is surface mount for easy installation and can be used to repeat the RF and Neo Data signals.
Heatmiser neoStat 12v V2 – Programmable Thermostat
£54.95 Excluding VATA smarter way to control your underfloor heating from anywhere via your smartphone
This Heatmiser neoStat is 12v powered and is the ideal upgrade route for those wanting app control and that have existing low voltage cabling installed. neoStat 12v are compatible with our 12v Wiring Centre UH8-N.
Click for: Product Installation & Data Sheet
HomeKit-Enabled Heatmiser neoHub Gen 2
Original price was: £93.50.£88.95Current price is: £88.95. Excluding VATHeatmiser neoHub is the gateway to the Neo System
The Heatmiser neoHub provides remote control of all neoStat’s and neoPlug’s from your iOS, Android and Windows 10 device.
The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.