Thermostats & Controls
High Temperature Fixing Tape
£5.55 Excluding VATHeavy duty adhesive tape available in a 15mm x 50m roll.
Hi-tack for fixing and locating cable. Always ensure sub-floor surface is dry and dust free.
Roll Dimensions: 15mm x 50 metres
Polyester Vapour Barrier – 1.0 Metre Wide
£28.50 – £45.45 Excluding VATPolyester Vapour Barrier – The essential top layer of your Eco Film system 1.0m Wide
Wireless Receiver Unit – V23
£55.15 Excluding VATThe V23 receiver is a Wall mounting receiver, specially designed to control electrical floor heating in combination with either the V22 Thermostat and/or V24 Central Controller.
It is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
Heatmiser 8 Zone Wiring Centre – UH8
£49.48 Excluding VATOur 8 zone wiring centre for optimum control of your underfloor heating system
The Heatmiser UH8 can be used in conjunction with our mains thermostats. The UH8 provides central switching of up to 8 zones as well as providing an output for a hot water cylinder, the system boiler and pump.
When used for underfloor heating, an option is available to use zone 8 as a conventional radiator zone. Up to 6 actuators can be connected to each zone.
UH8 Dimensions 384x148x60mm
Click for: Product Installation & Data Sheet
Heatmiser Thimble Sensor
£11.26 Excluding VATDiscreet Temperature Monitoring
The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly.
Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall.
The thimble sensor can be wired up to 20M away from the room thermostats.
Click for: Product Installation & Data Sheet
In-Screed Cable – Plastic Fixing Strip
£0.80 Excluding VATA moulded plastic fixing strip with cable radius profile fixing.
Available in 500mm lengths which can provide cable spacing of 65mm. Can be mechanically fixed or taped to the subfloor. Cables are then tensioned through the profile strip when laying. An extremely quick and efficient method of cable spacing and laying.
Strip Length: 500mm
Heatmiser Sensor Probe Housing – EN030
£5.05 Excluding VATRoom Sensor Enclosure
Housing for discreet location of the sensor probe
Dimensions 80Wx 80H x 22D mm
In-Screed Cable – Galvanised Fixing Strip
£13.95 Excluding VATAvailable as a 10m roll of galvanised steel strip. The product has cable fixing lugs at 35mm centres. Ideal when laying thicker cables on all sub-floor types. The ultimate in flexibility.
Roll Length: 10 Metres
In-Screed Cable – Fixing Clip Pack
£6.95 Excluding VATPlastic fixing clip for attaching cable on to foil foam backed insulation material. Deep barbed design provides secure fixing.
Pack Contents: 50 Clips
16amp Wireless Electric Heating Receiver – RF Switch 16A
£31.50 Excluding VATWireless 16amp Receiver
The RF-Switch 16A is our surface mount wireless receiver for electric heating. It is capable of switching up to 16A.
Please note this is not designed for electric floor heating as there is no floor limiting sensor function.
The RF Switch is compatible with the Slimline-RF and neoAir.
Two Channel Wireless Receiver – Heatmiser RF Switch V2
£28.60 Excluding VATWireless 2 Channel Receiver
The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler.
In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.
Click for: Product Installation & Data Sheet
Electric Floor Heating Touchscreen Room Thermostat – Heatmiser Touch-E v2
£59.95 Excluding VATThe Heatmiser Touch-e is our touchscreen electric floor heating thermostat
Our touchscreen electric floor heating model, capable of switching up to 16A and the touchscreen interface makes interacting with the heating system easy.
The Touch-e V2 is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution.
NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.
Click Here For: Touch-E V2 Product Manual
Heatmiser Boost – Neo & RF Series Repeater
£40.55 Excluding VATBoost your Wireless and Neo signals
The Heatmiser Boost is our Neo & RF Series Repeater. The Boost is surface mount for easy installation and can be used to repeat the RF and Neo Data signals.
Heatmiser neoAir Stand
£6.99 Excluding VATThe Heatmiser neoAir Stand has been specifically designed for the neoAir, allowing you to position the neoAir thermostat on a table.
Colour: White
Electric Floor Heating Touchscreen Room Thermostat – Heatmiser Touch-E Carbon
£59.95 Excluding VATThe Heatmiser Touch-e Carbon is our modern Touchscreen Thermostat designed specifically for electric floor heating
The Heatmiser Touch-e Carbon is our touchscreen programmable electric floor heating model, capable of switching up to 16A. The Touch-e Carbon features a negative Touchscreen LCD and is the ideal choice for those wanting an ultra modern thermostat.
The Touch-e Carbon is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution.
NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.
Click Here For: Touch-E Carbon Product Manual
Electrothermic Manifold Actuator
£11.25 Excluding VATManifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.
Click Here For: Actuator Datasheet
Heatmiser Sensor Probe
£4.60 Excluding VATRemote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor.
This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Suitable for all Heatmiser Thermostats
External Aerial for Heatmiser UH8-RF – Heatmiser EA1
£20.55 Excluding VATExtend your wireless signals
Our external aerial is designed to work with our UH8-RF Wireless Wiring Centre.
Radio Frequency (RF) communication is affected by metal objects and so this external aerial is ideal for those installations where the UH8-RF will be installed in a metal cupboard.
It is also perfect for extending the RF coverage within your property.
Flexel Sensor Probe
£12.95 Excluding VATRemote Air/Floor Sensor Probe
This sensor can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
For Use with:
- V22/V23 Thermostat/Receiver
- Flexel Touch Thermostat
- TH232 Thermostat
