Thermostats & Controls
Wireless Receiver Unit – V23
The V23 receiver is a Wall mounting receiver, specially designed to control electrical floor heating in combination with either the V22 Thermostat and/or V24 Central Controller.
It is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
Electric Underfloor Heating Central Wireless Control System – V24
The V24 Central Control System is a multizone central heating control unit.
V24 consists of a centrally located colour touch screen panel that communicates wirelessly with thermostats (V22) and sensors (V23) throughout your home. The V24 is a central control panel that links with V22 single zone control packs to provide convenient control of your whole house from a central location. The V24 comprises a colour touchscreen panel that wirelessly communicates with V22 thermostats throughout the home.This is a multi-zone controller that is fully scalable up to 24 zones. The V24 WIFI provides the same functions as the V24 central controller but with the ability to be controlled from your Smart Phone, using the intuitive iOS or Android App.
Heatmiser 8 Zone Wiring Centre – UH8
Our 8 zone wiring centre for optimum control of your underfloor heating system
The Heatmiser UH8 can be used in conjunction with our mains thermostats. The UH8 provides central switching of up to 8 zones as well as providing an output for a hot water cylinder, the system boiler and pump. When used for underfloor heating, an option is available to use zone 8 as a conventional radiator zone. Up to 6 actuators can be connected to each zone. UH8 Dimensions 384x148x60mmClick for: Product Installation & Data Sheet
Heatmiser Thimble Sensor
Discreet Temperature Monitoring
The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.Click for: Product Installation & Data Sheet
In-Screed Cable – Plastic Fixing Strip
A moulded plastic fixing strip with cable radius profile fixing.
Available in 500mm lengths which can provide cable spacing of 65mm. Can be mechanically fixed or taped to the subfloor. Cables are then tensioned through the profile strip when laying. An extremely quick and efficient method of cable spacing and laying.Strip Length: 500mm
Heatmiser Sensor Probe Housing – EN030
Heatmiser UH8-RF V2 – 8 Zone Wireless Wiring Centre
Our 8 Zone wireless wiring centre designed to work with our Slimline-RF and neoAir Thermostats.
Eight zones can be controlled as well as providing an output for a hot water cylinder. When used for underfloor heating, an option is available to use zone 8 as a conventional radiator zone. Dimensions: 384x148x60mmClick for: Product Installation & Data Sheet
In-Screed Cable – Galvanised Fixing Strip
WIFI enabled Electric Underfloor Heating Central Wireless Control System – V24 WIFI
The V24 WIFI Central Control System is a multizone central heating control unit The V24 WIFI provides the same functions as the V24 central controller but with the ability to be controlled from your Smart Phone, using the intuitive iOS or Android App.
V24 consists of a centrally located colour touch screen panel that communicates wirelessly with thermostats (V22) and sensors (V23) throughout your home. The V24 is a central control panel that links with V22 single zone control packs to provide convenient control of your whole house from a central location. The V24 comprises a colour touchscreen panel that wirelessly communicates with V22 thermostats throughout the home. This is a multi-zone controller that is fully scalable up to 24 zones. The V24 Wifi provides the same functions as the V24 central controller but with the ability to be controlled from your Smart Phone, using the intuitive iOS or Android App.
Heatmiser UH8-N – 8 Zone 12v Wiring Centre
Our 8 zone 12volt Network wiring centre for optimum control of your underfloor heating system
The Heatmiser UH8-N is designed to be used in conjunction with our 12v Network thermostats. The UH8-N provides central switching of up to 8 zones as well as providing an output for a hot water cylinder, the system boiler and pump. Dimensions: 384x148x60mmClick for: Product Installation & Data Sheet
In-Screed Cable – Fixing Clip Pack
HomeKit-Enabled Heatmiser neoHub Gen 2
Heatmiser neoHub is the gateway to the Neo System
The Heatmiser neoHub provides remote control of all neoStat's and neoPlug's from your iOS, Android and Windows 10 device. The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.Click for: Product Installation & Data Sheet
16amp Wireless Electric Heating Receiver – RF Switch 16A
Wireless 16amp Receiver
The RF-Switch 16A is our surface mount wireless receiver for electric heating. It is capable of switching up to 16A.
Please note this is not designed for electric floor heating as there is no floor limiting sensor function.
The RF Switch is compatible with the Slimline-RF and neoAir.
Two Channel Wireless Receiver – Heatmiser RF Switch V2
Wireless 2 Channel Receiver
The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler. In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.Click for: Product Installation & Data Sheet
Electric Floor Heating Touchscreen Room Thermostat – Heatmiser Touch-E v2
The Heatmiser Touch-e is our touchscreen electric floor heating thermostat
Our touchscreen electric floor heating model, capable of switching up to 16A and the touchscreen interface makes interacting with the heating system easy. The Touch-e V2 is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Touch-E V2 Product Manual
Heatmiser Boost – Neo & RF Series Repeater
Heatmiser neoAir Stand
Electric Floor Heating Touchscreen Room Thermostat – Heatmiser Touch-E Carbon
The Heatmiser Touch-e Carbon is our modern Touchscreen Thermostat designed specifically for electric floor heating
The Heatmiser Touch-e Carbon is our touchscreen programmable electric floor heating model, capable of switching up to 16A. The Touch-e Carbon features a negative Touchscreen LCD and is the ideal choice for those wanting an ultra modern thermostat. The Touch-e Carbon is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Touch-E Carbon Product Manual
Electrothermic Manifold Actuator
Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.Click Here For: Actuator Datasheet
Heatmiser Sensor Probe
Remote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats
External Aerial for Heatmiser UH8-RF – Heatmiser EA1
Extend your wireless signals
Our external aerial is designed to work with our UH8-RF Wireless Wiring Centre. Radio Frequency (RF) communication is affected by metal objects and so this external aerial is ideal for those installations where the UH8-RF will be installed in a metal cupboard. It is also perfect for extending the RF coverage within your property.
