Thermostats & Controls
Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3
£38.95 Excluding VATThe Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind
The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat.
A 3M remote floor sensor is provided.
NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.
Click Here For: Slimline-E V3 Product Manual
Heatmiser Slimline-B V3 Battery Powered Programmable Thermostat
£35.65 Excluding VATA Battery Powered Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system
Our Slimline-B V3 battery thermostat offers a viable upgrade route for those with a dial thermostat working on a two wire system.
Click Here For: Slimline-B Product Manual
Heatmiser Sensor Probe
£4.60 Excluding VATRemote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor.
This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Suitable for all Heatmiser Thermostats
Flexel Sensor Probe
£12.95 Excluding VATRemote Air/Floor Sensor Probe
This sensor can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
For Use with:
- V22/V23 Thermostat/Receiver
- Flexel Touch Thermostat
- TH232 Thermostat
16amp Wireless Electric Heating Receiver – RF Switch 16A
£31.50 Excluding VATWireless 16amp Receiver
The RF-Switch 16A is our surface mount wireless receiver for electric heating. It is capable of switching up to 16A.
Please note this is not designed for electric floor heating as there is no floor limiting sensor function.
The RF Switch is compatible with the Slimline-RF and neoAir.
Two Channel Wireless Receiver – Heatmiser RF Switch V2
£28.60 Excluding VATWireless 2 Channel Receiver
The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler.
In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.
Click for: Product Installation & Data Sheet
Heatmiser neoPlug – Smart Plug
£39.95 Excluding VATExpand your Neo System with neoPlug and control your Appliances from Anywhere!
With the Heatmiser neoPlug you can control the appliance manually from the neoApp or you can program switching times via the app that the appliance will follow.
With the latest apps for Android, Windows 10 and iOS, users can include the neoPlug in their Geo Location triggers, so the appliance can turn on when you get close to home or when you leave.
Click Here For: NeoPlug Data Sheet
Heatmiser neoAir Stand
£6.99 Excluding VATThe Heatmiser neoAir Stand has been specifically designed for the neoAir, allowing you to position the neoAir thermostat on a table.
Colour: White
Heatmiser Sensor Probe Housing – EN030
£5.05 Excluding VATRoom Sensor Enclosure
Housing for discreet location of the sensor probe
Dimensions 80Wx 80H x 22D mm
Heatmiser Wireless Air Sensor
£12.25 Excluding VATA Wireless Air Sensor for optimum control of your heating system
The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required.
The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.
Click Here For: Wireless Air Sensor Datasheet
Heatmiser Wireless Window/Door Switch
£15.20 Excluding VATA Wireless Window/Door Sensor for optimum control of your heating system
The Wireless Window / Door Sensor can be used with the Touch V2, Edge and Neo System and and is used to switch the heating off whenever a window or door is opened.
The Wireless Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.