Thermostats & Controls
Analogue Room Thermostat – TH131
£43.65 Excluding VATThe TH131 is an electronic thermostat developed for optimal regulation of underfloor heating systems.
The TH131 is a simple to use thermostat. Temperature control is via a simple analogue dial.
The thermostat has three modes of operation. Choose between room thermostat, floor thermostat or a combination of room thermostat with floor limit sensor.
Click Here For: TH131 Product Manual
Electrothermic Manifold Actuator
£11.25 Excluding VATManifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.
Click Here For: Actuator Datasheet
Wireless Thermostat – Heatmiser Slimline-RF V3
£34.75 Excluding VATA wireless solution to control your underfloor heating
The Heatmiser Slimline-RF V3 wireless thermostat works with the Heatmiser RF Switch & UH8-RF Wireless Wiring Centre.
The wireless thermostat is designed to be wall mounted in the area being controlled, up to 100 meters open space from the receiver.
Click Here For: Slimline-RF Product Manual
Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3
£38.95 Excluding VATThe Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind
The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat.
A 3M remote floor sensor is provided.
NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.
Click Here For: Slimline-E V3 Product Manual
Heatmiser Slimline-B V3 Battery Powered Programmable Thermostat
£35.65 Excluding VATA Battery Powered Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system
Our Slimline-B V3 battery thermostat offers a viable upgrade route for those with a dial thermostat working on a two wire system.
Click Here For: Slimline-B Product Manual
Heatmiser Sensor Probe
£4.60 Excluding VATRemote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor.
This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Suitable for all Heatmiser Thermostats
Flexel Sensor Probe
£12.95 Excluding VATRemote Air/Floor Sensor Probe
This sensor can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
For Use with:
- V22/V23 Thermostat/Receiver
- Flexel Touch Thermostat
- TH232 Thermostat
16amp Wireless Electric Heating Receiver – RF Switch 16A
£31.50 Excluding VATWireless 16amp Receiver
The RF-Switch 16A is our surface mount wireless receiver for electric heating. It is capable of switching up to 16A.
Please note this is not designed for electric floor heating as there is no floor limiting sensor function.
The RF Switch is compatible with the Slimline-RF and neoAir.
Two Channel Wireless Receiver – Heatmiser RF Switch V2
£28.60 Excluding VATWireless 2 Channel Receiver
The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler.
In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.