Thermostats & Controls
Heatmiser neoAir Stand
Heatmiser Dial Thermostat – DS1 V2
A Dial Type Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS1 is our 230v, electronic room thermostat, ideal for conventional or combi-boiler systems. Includes Optional Remote Air Sensing ModeClick Here For: DS1 V2 Product Manual
Heatmiser Dial Thermostat with LCD DS1-L V2
A Dial Type Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS1 is our 230v, electronic room thermostat incorporating an LCD. In normal operation, the actual room temperature is displayed on the LCD, rotating the dial will display the set temperature for 5 seconds.Click Here For: DS1-L Product Manual
Heatmiser Wireless Air Sensor
A Wireless Air Sensor for optimum control of your heating system
The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required. The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.Click Here For: Wireless Air Sensor Datasheet
Two Channel Wireless Receiver – Heatmiser RF Switch V2
Wireless 2 Channel Receiver
The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler. In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.Click for: Product Installation & Data Sheet
Heatmiser Set Back Thermostat DS-SB-V3
A Dial Type Set Back Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS-SB features a set back function, a function that will automatically reduce the set temperature by 4C when no time clock signal is detected therefore providing more flexible control of your heating.Click Here For: DS-SB Product Manual
Heatmiser 6 Zone Compact Wiring Centre – UH6
Our 6 zone compact wiring centre for optimum control of your underfloor heating system
The Heatmiser UH6 is our 6 Zone underfloor heating wiring centre designed to work with our 230v Thermostats. The UH6 wiring centre provides central switching and is therefore ideally situated next to the underfloor heating manifold. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. Up to 4 actuators can be connected to each zone.Features:
- Central wiring for up to 6 zones
- DIN Rail Mounting Option (DIN Rail not included)
- Output for underfloor heating valve and pump activated when any thermostat calls for heat
- Actuator outputs: 230v
- Dimensions (LxHxD) 384x148x60mm