Thermostats & Controls
Heatmiser Thimble Sensor
Discreet Temperature Monitoring
The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.Click for: Product Installation & Data Sheet
Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3
The Heatmiser Slimline-E V3 floor heating thermostat has been designed specifically with electric floor heating in mind
The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat. A 3M remote floor sensor is provided. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Slimline-E V3 Product Manual
Heatmiser Sensor Probe Housing – EN030
Heatmiser neoAir Stand
Heatmiser Dial Thermostat – DS1 V2
A Dial Type Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS1 is our 230v, electronic room thermostat, ideal for conventional or combi-boiler systems. Includes Optional Remote Air Sensing ModeClick Here For: DS1 V2 Product Manual
Heatmiser Dial Thermostat with LCD DS1-L V2
A Dial Type Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS1 is our 230v, electronic room thermostat incorporating an LCD. In normal operation, the actual room temperature is displayed on the LCD, rotating the dial will display the set temperature for 5 seconds.Click Here For: DS1-L Product Manual
Heatmiser Wireless Air Sensor
A Wireless Air Sensor for optimum control of your heating system
The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required. The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.Click Here For: Wireless Air Sensor Datasheet
High Specification Adhesive Tape
Two Channel Wireless Receiver – Heatmiser RF Switch V2
Wireless 2 Channel Receiver
The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler. In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.Click for: Product Installation & Data Sheet
Heatmiser Set Back Thermostat DS-SB-V3
A Dial Type Set Back Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS-SB features a set back function, a function that will automatically reduce the set temperature by 4C when no time clock signal is detected therefore providing more flexible control of your heating.Click Here For: DS-SB Product Manual
16amp Wireless Electric Heating Receiver – RF Switch 16A
Wireless 16amp Receiver
The RF-Switch 16A is our surface mount wireless receiver for electric heating. It is capable of switching up to 16A.
Please note this is not designed for electric floor heating as there is no floor limiting sensor function.
The RF Switch is compatible with the Slimline-RF and neoAir.
