Thermostats & Controls
Flexel Touch – Electric Floor Heating Thermostat
The new Touch is designed to be the simplest to use electric underfloor heating control available.
The Touch comes packed with innovative features to optimise your comfort and minimise running costs with the simplest touch screen interface. A large full colour backlit touch screen provides simple programming by guiding you through program setup and adjustment - no need for any complicated instruction manual.Click Here For: Flexel Touch Product Manual
Electric Underfloor Heating Central Wireless Control System – V24
The V24 Central Control System is a multizone central heating control unit.
V24 consists of a centrally located colour touch screen panel that communicates wirelessly with thermostats (V22) and sensors (V23) throughout your home. The V24 is a central control panel that links with V22 single zone control packs to provide convenient control of your whole house from a central location. The V24 comprises a colour touchscreen panel that wirelessly communicates with V22 thermostats throughout the home.This is a multi-zone controller that is fully scalable up to 24 zones. The V24 WIFI provides the same functions as the V24 central controller but with the ability to be controlled from your Smart Phone, using the intuitive iOS or Android App.
Wireless Receiver Unit – V23
The V23 receiver is a Wall mounting receiver, specially designed to control electrical floor heating in combination with either the V22 Thermostat and/or V24 Central Controller.
It is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
Wireless 7 Day Programmable Room Thermostat – V22
The V22 Wireless Programmable Thermostat is designed to provide wireless time and temperature control to heating systems
Wall or Stand mounted (Supplied with stand) The V22 is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
Heatmiser UH8-RF V2 – 8 Zone Wireless Wiring Centre
Our 8 Zone wireless wiring centre designed to work with our Slimline-RF and neoAir Thermostats.
Eight zones can be controlled as well as providing an output for a hot water cylinder. When used for underfloor heating, an option is available to use zone 8 as a conventional radiator zone. Dimensions: 384x148x60mmClick for: Product Installation & Data Sheet
Heatmiser UH8-N – 8 Zone 12v Wiring Centre
Our 8 zone 12volt Network wiring centre for optimum control of your underfloor heating system
The Heatmiser UH8-N is designed to be used in conjunction with our 12v Network thermostats. The UH8-N provides central switching of up to 8 zones as well as providing an output for a hot water cylinder, the system boiler and pump. Dimensions: 384x148x60mmClick for: Product Installation & Data Sheet
Heatmiser 8 Zone Wiring Centre – UH8
Our 8 zone wiring centre for optimum control of your underfloor heating system
The Heatmiser UH8 can be used in conjunction with our mains thermostats. The UH8 provides central switching of up to 8 zones as well as providing an output for a hot water cylinder, the system boiler and pump. When used for underfloor heating, an option is available to use zone 8 as a conventional radiator zone. Up to 6 actuators can be connected to each zone. UH8 Dimensions 384x148x60mmClick for: Product Installation & Data Sheet
Heatmiser 6 Zone Compact Wiring Centre – UH6
Our 6 zone compact wiring centre for optimum control of your underfloor heating system
The Heatmiser UH6 is our 6 Zone underfloor heating wiring centre designed to work with our 230v Thermostats. The UH6 wiring centre provides central switching and is therefore ideally situated next to the underfloor heating manifold. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. Up to 4 actuators can be connected to each zone.Features:
- Central wiring for up to 6 zones
- DIN Rail Mounting Option (DIN Rail not included)
- Output for underfloor heating valve and pump activated when any thermostat calls for heat
- Actuator outputs: 230v
- Dimensions (LxHxD) 384x148x60mm
Click for: Product Installation & Data Sheet
Heatmiser 4 Zone Wiring Centre – UH4
Our 4 zone wiring centre for optimum control of your underfloor heating system
The Heatmiser UH4 can be used in conjunction with our mains thermostats. The UH4 provides central switching of up to 4 zones as well as providing an output for a hot water cylinder, the system boiler and pump. When used for underfloor heating, an option is available to use zone 4 as a conventional radiator zone. Up to 6 actuators can be connected to each zone. UH4 Dimensions 384x148x60mmClick for: Product Installation & Data Sheet
Electric Floor Heating Touchscreen Room Thermostat – Heatmiser Touch-E v2
The Heatmiser Touch-e is our touchscreen electric floor heating thermostat
Our touchscreen electric floor heating model, capable of switching up to 16A and the touchscreen interface makes interacting with the heating system easy. The Touch-e V2 is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Touch-E V2 Product Manual
Electric Floor Heating Touchscreen Room Thermostat – Heatmiser Touch-E Carbon
The Heatmiser Touch-e Carbon is our modern Touchscreen Thermostat designed specifically for electric floor heating
The Heatmiser Touch-e Carbon is our touchscreen programmable electric floor heating model, capable of switching up to 16A. The Touch-e Carbon features a negative Touchscreen LCD and is the ideal choice for those wanting an ultra modern thermostat. The Touch-e Carbon is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.Click Here For: Touch-E Carbon Product Manual
