Thermostats & Controls
High Specification Adhesive Tape
£8.05 Excluding VATHigh Specification Adhesive Tape – suitable for high temperatures – 50mm x 50 metre
Used for taping joints in insulation boards and taping down cables and mats.
Two Channel Wireless Receiver – Heatmiser RF Switch V2
£28.60 Excluding VATWireless 2 Channel Receiver
The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler.
In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.
Click for: Product Installation & Data Sheet
Heatmiser Set Back Thermostat DS-SB-V3
£26.85 Excluding VATA Dial Type Set Back Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS-SB features a set back function, a function that will automatically reduce the set temperature by 4C when no time clock signal is detected therefore providing more flexible control of your heating.
Click Here For: DS-SB Product Manual
Heatmiser neoStat WiFi – WiFi Thermostat
£74.95 – £75.95 Excluding VATThe Heatmiser neoStat WiFi is a 230v programmable thermostat featuring illuminated touch keys and WiFi connection. The neoStat WiFi can be configured to work as a programmable thermostat or as a timer- so if you want to take control of your towel rails, or lighting – neoStat WiFi offers you this and more!
The neoStat WiFi has been designed to be slim & stylish, and feature proximity based illuminated soft touch keys.
When connected to your home broadband router, you can control your heating from anywhere
No Neohub is required to connect the NeoStat WiFi to the neoApp.
Unlimited neoStat WiFi can be paired to the neoApp, offering smart control of your entire home.
Click for: Product Manual
Click for: Product Data Sheet
16amp Wireless Electric Heating Receiver – RF Switch 16A
£31.50 Excluding VATWireless 16amp Receiver
The RF-Switch 16A is our surface mount wireless receiver for electric heating. It is capable of switching up to 16A.
Please note this is not designed for electric floor heating as there is no floor limiting sensor function.
The RF Switch is compatible with the Slimline-RF and neoAir.
High Temperature Fixing Tape
£5.55 Excluding VATHeavy duty adhesive tape available in a 15mm x 50m roll.
Hi-tack for fixing and locating cable. Always ensure sub-floor surface is dry and dust free.
Roll Dimensions: 15mm x 50 metres
Electric Floor Heating Touchscreen Room Thermostat – Heatmiser Touch-E v2
£59.95 Excluding VATThe Heatmiser Touch-e is our touchscreen electric floor heating thermostat
Our touchscreen electric floor heating model, capable of switching up to 16A and the touchscreen interface makes interacting with the heating system easy.
The Touch-e V2 is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution.
NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.
Click Here For: Touch-E V2 Product Manual
Heatmiser 6 Zone Compact Wiring Centre – UH6
£49.50 Excluding VATOur 6 zone compact wiring centre for optimum control of your underfloor heating system
The Heatmiser UH6 is our 6 Zone underfloor heating wiring centre designed to work with our 230v Thermostats.
The UH6 wiring centre provides central switching and is therefore ideally situated next to the underfloor heating manifold. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.
Up to 4 actuators can be connected to each zone.
Features:
- Central wiring for up to 6 zones
- DIN Rail Mounting Option (DIN Rail not included)
- Output for underfloor heating valve and pump activated when any thermostat calls for heat
- Actuator outputs: 230v
- Dimensions (LxHxD) 384x148x60mm
Click for: Product Installation & Data Sheet
Polyester Vapour Barrier – 1.0 Metre Wide
£28.50 – £45.45 Excluding VATPolyester Vapour Barrier – The essential top layer of your Eco Film system 1.0m Wide
Heatmiser Electric Heater Wireless App Controllable Thermostat Kit – neoAir 16A Bundle V2
£125.00 Excluding VATA smarter wireless way to control your electric heaters/radiators from anywhere via your smartphone
The Heatmiser neoAir V2 Bundle includes a NeoAir, 16 Amp RF Switch and Desk Stand and is perfect for those looking for a wireless thermostat solution to control electric heaters/radiators, whilst allowing you to take control of your heating and hot water from anywhere via your smartphone
(a NeoHub will need to be purchased seperately to enable the APP Control facility)
Wireless Receiver Unit – V23
£55.15 Excluding VATThe V23 receiver is a Wall mounting receiver, specially designed to control electrical floor heating in combination with either the V22 Thermostat and/or V24 Central Controller.
It is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.
Flexel Touch – Electric Floor Heating Thermostat
£65.48 – £68.95 Excluding VATThe new Touch is designed to be the simplest to use electric underfloor heating control available.
The Touch comes packed with innovative features to optimise your comfort and minimise running costs with the simplest touch screen interface.
A large full colour backlit touch screen provides simple programming by guiding you through program setup and adjustment – no need for any complicated instruction manual.
Click Here For: Flexel Touch Product Manual
Heatmiser Boost – Neo & RF Series Repeater
£40.55 Excluding VATBoost your Wireless and Neo signals
The Heatmiser Boost is our Neo & RF Series Repeater. The Boost is surface mount for easy installation and can be used to repeat the RF and Neo Data signals.
Flexel Sensor Probe
£12.95 Excluding VATRemote Air/Floor Sensor Probe
This sensor can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
For Use with:
- V22/V23 Thermostat/Receiver
- Flexel Touch Thermostat
- TH232 Thermostat
Wireless Thermostat & Receiver – Slimline-RF Kit V3
£65.99 Excluding VATA wireless solution to control your underfloor heating
The Heatmiser Slimline-RF Kit comprises of a Heatmiser Slimline-RF Multi Mode Thermostat and RF-Switch wireless receiver.
The receiver is hard wired to the boiler, so is normally positioned next to the boiler or you could use the existing thermostat cabling. The wireless thermostat is then wall mounted within range of the receiver (up to 100 meters open space)
Click Here For: Slimline-RF Product Manual
Click Here For: RF Switch Product Manual
Heatmiser UH8-N – 8 Zone 12v Wiring Centre
£95.00 Excluding VATOur 8 zone 12volt Network wiring centre for optimum control of your underfloor heating system
The Heatmiser UH8-N is designed to be used in conjunction with our 12v Network thermostats. The UH8-N provides central switching of up to 8 zones as well as providing an output for a hot water cylinder, the system boiler and pump.
Dimensions: 384x148x60mm
Click for: Product Installation & Data Sheet
Heatmiser Touch Carbon Thermostat
£52.50 Excluding VATA Touchscreen Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system
The Heatmiser Touch Carbon is our 230v powered “All Black” TouchScreen Thermostat featuring a negative Touchscreen LCD and is the ideal choice for those wanting an ultra modern thermostat.
The Touch Carbon is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution.
Click Here For: Touch Carbon Product Manual
Heatmiser Edge – Multi Mode Programmable Room Thermostat
£35.95 Excluding VATA Digital Programmable Room Thermostat that can be combined with wireless sensors for optimum control
Heatmiser edge offers a great upgrade route for those with an existing dial thermostat or for those looking to measure the temperature remote from the thermostat.
The wireless air sensor function is perfect for those looking to measure the temperature in another location and for those with larger open plan properties, multiple air sensors can be used to create an average temperature.
Click Here For: Heatmiser EDGE Product Manual
In-Screed Cable – Galvanised Fixing Strip
£13.95 Excluding VATAvailable as a 10m roll of galvanised steel strip. The product has cable fixing lugs at 35mm centres. Ideal when laying thicker cables on all sub-floor types. The ultimate in flexibility.
Roll Length: 10 Metres
Analogue Room Thermostat – TH131
£43.65 Excluding VATThe TH131 is an electronic thermostat developed for optimal regulation of underfloor heating systems.
The TH131 is a simple to use thermostat. Temperature control is via a simple analogue dial.
The thermostat has three modes of operation. Choose between room thermostat, floor thermostat or a combination of room thermostat with floor limit sensor.
Click Here For: TH131 Product Manual
Heatmiser neoPlug – Smart Plug
£39.95 Excluding VATExpand your Neo System with neoPlug and control your Appliances from Anywhere!
With the Heatmiser neoPlug you can control the appliance manually from the neoApp or you can program switching times via the app that the appliance will follow.
With the latest apps for Android, Windows 10 and iOS, users can include the neoPlug in their Geo Location triggers, so the appliance can turn on when you get close to home or when you leave.
Click Here For: NeoPlug Data Sheet
Heatmiser 4 Channel Touchscreen Programmable Time Control – TM4-TS V2 (230 volt)
£58.65 Excluding VATA Touchscreen 4 Channel Time Clock for simplified zone control of your floor heating system via the dial type thermostats DS-SB
Our 4 Zone Touchscreen Time Clock is perfect for those looking to control multiple outputs from a single control point.
The TM4 has been designed to work on with our UH8 and DS-SB Setback Thermostat, and offers a highly effective, simple to use control system.
The Touchscreen interface makes programming switching times in the TM4 simple, and means you no longer need to reach for the user manual when you need to amend the programmed setting.
Heatmiser neoUltra Thermostat & Central Control
£95.50 Excluding VATCentral control of your neo system
The neoUltra has been designed to work as a standalone thermostat, or as part of an app controlled Neo System.
In addition, the neoUltra can operate as a central controller for your Neo System, providing a single point of access to all of the neoStat, neoAir & neoPlug in your home.
