Thermostats & Controls
Find the right thermostat for your home: From programmable to voice controlled smart options.
In-Screed Cable – Plastic Fixing Strip
£0.80 Excluding VATA moulded plastic fixing strip with cable radius profile fixing.
Available in 500mm lengths which can provide cable spacing of 65mm. Can be mechanically fixed or taped to the subfloor. Cables are then tensioned through the profile strip when laying. An extremely quick and efficient method of cable spacing and laying.
Strip Length: 500mm
Heatmiser Sensor Probe
£4.60 Excluding VATRemote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor.
This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Suitable for all Heatmiser Thermostats
Heatmiser Sensor Probe Housing – EN030
£5.05 Excluding VATRoom Sensor Enclosure
Housing for discreet location of the sensor probe
Dimensions 80Wx 80H x 22D mm
High Temperature Fixing Tape
£5.55 Excluding VATHeavy duty adhesive tape available in a 15mm x 50m roll.
Hi-tack for fixing and locating cable. Always ensure sub-floor surface is dry and dust free.
Roll Dimensions: 15mm x 50 metres
In-Screed Cable – Fixing Clip Pack
£6.95 Excluding VATPlastic fixing clip for attaching cable on to foil foam backed insulation material. Deep barbed design provides secure fixing.
Pack Contents: 50 Clips
Heatmiser neoAir Stand
£6.99 Excluding VATThe Heatmiser neoAir Stand has been specifically designed for the neoAir, allowing you to position the neoAir thermostat on a table.
Colour: White
Electrothermic Manifold Actuator
£11.25 Excluding VATManifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.
Click Here For: Actuator Datasheet
Heatmiser Thimble Sensor
£11.26 Excluding VATDiscreet Temperature Monitoring
The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly.
Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall.
The thimble sensor can be wired up to 20M away from the room thermostats.
Click for: Product Installation & Data Sheet
Heatmiser Wireless Air Sensor
£12.25 Excluding VATA Wireless Air Sensor for optimum control of your heating system
The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required.
The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.
Click Here For: Wireless Air Sensor Datasheet
Flexel Sensor Probe
£12.95 Excluding VATRemote Air/Floor Sensor Probe
This sensor can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
For Use with:
- V22/V23 Thermostat/Receiver
- Flexel Touch Thermostat
- TH232 Thermostat
In-Screed Cable – Galvanised Fixing Strip
£13.95 Excluding VATAvailable as a 10m roll of galvanised steel strip. The product has cable fixing lugs at 35mm centres. Ideal when laying thicker cables on all sub-floor types. The ultimate in flexibility.
Roll Length: 10 Metres
Heatmiser Dial Thermostat – DS1 V2
£14.99 Excluding VATA Dial Type Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS1 is our 230v, electronic room thermostat, ideal for conventional or combi-boiler systems.
Includes Optional Remote Air Sensing Mode
Click Here For: DS1 V2 Product Manual
Heatmiser Wireless Window/Door Switch
£15.20 Excluding VATA Wireless Window/Door Sensor for optimum control of your heating system
The Wireless Window / Door Sensor can be used with the Touch V2, Edge and Neo System and and is used to switch the heating off whenever a window or door is opened.
The Wireless Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.
Click Here For: Wireless Contact Sensor Datasheet
External Aerial for Heatmiser UH8-RF – Heatmiser EA1
£20.55 Excluding VATExtend your wireless signals
Our external aerial is designed to work with our UH8-RF Wireless Wiring Centre.
Radio Frequency (RF) communication is affected by metal objects and so this external aerial is ideal for those installations where the UH8-RF will be installed in a metal cupboard.
It is also perfect for extending the RF coverage within your property.
Heatmiser Dial Thermostat with LCD DS1-L V2
£25.17 Excluding VATA Dial Type Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS1 is our 230v, electronic room thermostat incorporating an LCD. In normal operation, the actual room temperature is displayed on the LCD, rotating the dial will display the set temperature for 5 seconds.
Click Here For: DS1-L Product Manual
Heatmiser Set Back Thermostat DS-SB-V3
£26.85 Excluding VATA Dial Type Set Back Room Thermostat for controlling individual zones of your floor heating system
The Heatmiser DS-SB features a set back function, a function that will automatically reduce the set temperature by 4C when no time clock signal is detected therefore providing more flexible control of your heating.
Click Here For: DS-SB Product Manual
Two Channel Wireless Receiver – Heatmiser RF Switch V2
£28.60 Excluding VATWireless 2 Channel Receiver
The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler.
In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.
Click for: Product Installation & Data Sheet
16amp Wireless Electric Heating Receiver – RF Switch 16A
£31.50 Excluding VATWireless 16amp Receiver
The RF-Switch 16A is our surface mount wireless receiver for electric heating. It is capable of switching up to 16A.
Please note this is not designed for electric floor heating as there is no floor limiting sensor function.
The RF Switch is compatible with the Slimline-RF and neoAir.
Wireless Thermostat – Heatmiser Slimline-RF V3
£34.75 Excluding VATA wireless solution to control your underfloor heating
The Heatmiser Slimline-RF V3 wireless thermostat works with the Heatmiser RF Switch & UH8-RF Wireless Wiring Centre.
The wireless thermostat is designed to be wall mounted in the area being controlled, up to 100 meters open space from the receiver.
Click Here For: Slimline-RF Product Manual
Heatmiser Slimline-B V3 Battery Powered Programmable Thermostat
£35.65 Excluding VATA Battery Powered Digital Programmable Room Thermostat for controlling either individual or multiple zones of your floor heating system
Our Slimline-B V3 battery thermostat offers a viable upgrade route for those with a dial thermostat working on a two wire system.
Click Here For: Slimline-B Product Manual
Heatmiser Edge – Multi Mode Programmable Room Thermostat
£35.95 Excluding VATA Digital Programmable Room Thermostat that can be combined with wireless sensors for optimum control
Heatmiser edge offers a great upgrade route for those with an existing dial thermostat or for those looking to measure the temperature remote from the thermostat.
The wireless air sensor function is perfect for those looking to measure the temperature in another location and for those with larger open plan properties, multiple air sensors can be used to create an average temperature.